1. FCC ID
  2. 2A5HX
  3. 2A5HXCENTAURICARBON

FCC ID 2A5HXCENTAURICARBON

FDM 3D Printer

by SHENZHEN ELEGOO TECHNOLOGY CO., LTD.

Grantee Code: 2A5HX   Product Code: CENTAURICARBON
Latest application date: 2024-09-23

FCC ID Device Details

FCC ID2A5HXCENTAURICARBON
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A5HX
Product CodeCENTAURICARBON
Applicant BusinessSHENZHEN ELEGOO TECHNOLOGY CO., LTD. 🇨🇳
Related Domains elegoo.com
Equipment ClassFDM 3D Printer
Test FirmDongguan Yaxu (AiT) Technology Limited

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2024-09-23
2412-2462 MHzOriginal Equipment2024-09-23

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2024-09-23PDF 3 MB
Internal PhotosInternal Photos2024-09-23PDF 3.3 MB
External PhotosExternal Photos2024-09-23PDF 545.1 KB
FCC POA Metadata onlyExternal Photos2024-09-23PDF 114.4 KB
label and locationID Label/Location Info2024-09-23PDF 89.7 KB
Test Setup PhotosTest Setup Photos2024-09-23PDF 1.2 MB
Antenna SpecificationTest Report2024-09-23PDF 857.5 KB
Test Data for 2.4GWIFI_part 1Test Report2024-09-23PDF 3.9 MB
Test Data for 2.4GWIFI_part 2Test Report2024-09-23PDF 3.5 MB
Test Data for 5.2GWIFI_part 1Test Report2024-09-23PDF 5.4 MB
Test Data for 5.2WIFI_part 2Test Report2024-09-23PDF 5 MB
Test Data for 5.8GWIFI_part 1Test Report2024-09-23PDF 5.4 MB
Test Data for 5.8GWIFI_part 2Test Report2024-09-23PDF 4.5 MB
Test Report- 5G WiFi Test ReportTest Report2024-09-23PDF 1 MB
Test Report-2.4G WiFiTest Report2024-09-23PDF 1 MB
Covered Equipment Attestation_2.911(d)(5)(i) and (ii)Attestation Statements2024-09-23PDF 97.6 KB
US_AgentAttestation Statements2024-09-23PDF 128.8 KB
Declaration Letter of Model DifferenceCover Letter(s)2024-09-23PDF 92.7 KB
Declaration Letter of Software Security Requirements-SlaverCover Letter(s)2024-09-23PDF 597.4 KB
FCC Confidentiality request letter - BOMCover Letter(s)2024-09-23PDF 139.1 KB
FCC Declaration of Disable WLAN Channel 12 and 13Cover Letter(s)2024-09-23PDF 108.2 KB
FCC POACover Letter(s)2024-09-23PDF 114.4 KB
FCC UNII Device Declaration Letter-SlaverCover Letter(s)2024-09-23PDF 176.9 KB
FCC RF Exposure-MPERF Exposure Info2024-09-23PDF 175.8 KB
Block Diagram_FCC Metadata onlyBlock DiagramPDF 114.8 KB
schematic Metadata onlySchematicsPDF 1.6 MB
Operation Description_FCC Metadata onlyOperational DescriptionPDF 182.1 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 140.7 KB

Application Information

Application IDVqWN4Q0k2ttv07jQ7ce9jg==
Final Action Date2024-09-23
Application PurposeOriginal Equipment
Applicant FRN0032060733
ModelCENTAURICARBON
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionFDM 3D Printer
Responsible PartyCai PengYue, p.cai@elegoo.com , 13539539272
Test FirmCoin Tang, Dongguan Yaxu (AiT) Technology Limited, info@aitek.org.cn , +86 0769-82020499-21
TCB Emailjoerdismitzloff@eurofins.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
VqWN4Q0k2ttv07jQ7ce9jg==2024-09-23Original Equipment
GlmQVroPFgV/v9lhu1ZZlg==2024-09-23Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.028800015CCC
5180-5240 MHz0.028615ECC
5745-5825 MHz0.01515ECC

Grants

TCB Grant - Application VqWN4Q0k2ttv07jQ7ce9jg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 09/23/2024

Application Dated: 09/23/2024
SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
101, No.30, Dahe Industrial Zone,
Guancheng Community, Guanhu Street, Longhua
District, Shenzhen, Chin,
China
 
Attention: Cai PengYue

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A5HXCENTAURICARBON
Name of Grantee:  SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: FDM 3D Printer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0286  
CC 15E 5745.0  -  5825.0 0.015  

Output power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application VqWN4Q0k2ttv07jQ7ce9jg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
101, No.30, Dahe Industrial Zone, Guancheng Community, Guanhu Street, Longhua
District, Shenzhen, Chin,
China 		  Date of Grant: 09/23/2024

Application Dated: 09/23/2024
 
Attention: Cai PengYue

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A5HXCENTAURICARBON
Name of Grantee:  SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: FDM 3D Printer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0286  
CC 15E 5745.0  -  5825.0 0.015  

Output power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application GlmQVroPFgV/v9lhu1ZZlg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 09/23/2024

Application Dated: 09/23/2024
SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
101, No.30, Dahe Industrial Zone,
Guancheng Community, Guanhu Street, Longhua
District, Shenzhen, Chin,
China
 
Attention: Cai PengYue

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A5HXCENTAURICARBON
Name of Grantee:  SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: FDM 3D Printer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.0288  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application GlmQVroPFgV/v9lhu1ZZlg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
101, No.30, Dahe Industrial Zone, Guancheng Community, Guanhu Street, Longhua
District, Shenzhen, Chin,
China 		  Date of Grant: 09/23/2024

Application Dated: 09/23/2024
 
Attention: Cai PengYue

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A5HXCENTAURICARBON
Name of Grantee:  SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: FDM 3D Printer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.0288  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: