FCC ID 2A5HX-MARS4
UV Photocuring 3D Printer
by SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
Grantee Code: 2A5HX Product Code: MARS4
Latest application date: 2023-07-17
FCC ID Device Details
| FCC ID | 2A5HX-MARS4 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2A5HX |
| Product Code | MARS4 |
| Applicant Business | SHENZHEN ELEGOO TECHNOLOGY CO., LTD. 🇨🇳 |
| Related Domains |  elegoo.com |
| Equipment Class | UV Photocuring 3D Printer |
| Test Firm | Dongguan Yaxu (AiT) Technology Limited |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5775 MHz | Original Equipment | 2023-07-17 |
| 2422-2452 MHz | Original Equipment | 2023-07-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2023-07-17 | PDF 1.5 MB |
| Internal Photos | Internal Photos | 2023-07-17 | PDF 5.8 MB |
| External Photos | External Photos | 2023-07-17 | PDF 1,018.6 KB |
| label and location | ID Label/Location Info | 2023-07-17 | PDF 65.8 KB |
| Test Setup Photos | Test Setup Photos | 2023-07-17 | PDF 304.5 KB |
| Antenna Report re. | Test Report | 2023-07-17 | PDF 896.4 KB |
| Appendix C_RF Test Data for 2.4GWIFI_part 1 | Test Report | 2023-07-17 | PDF 3.9 MB |
| Appendix C_RF Test Data for 2.4GWIFI_part 2 | Test Report | 2023-07-17 | PDF 2.2 MB |
| Appendix D_RF Test Data for 5.2GWIFI re, | Test Report | 2023-07-17 | PDF 5 MB |
| Appendix E_RF Test Data for 5.8GWIFI re. | Test Report | 2023-07-17 | PDF 5.2 MB |
| Test Report- 5.8GWIFI | Test Report | 2023-07-17 | PDF 688.8 KB |
| Test Report- B1 WiFi | Test Report | 2023-07-17 | PDF 725.2 KB |
| Test Report-2.4G WiFi | Test Report | 2023-07-17 | PDF 721.5 KB |
| Covered Equipment Attestation_2.911(d)(5)(i) and (ii) | Attestation Statements | 2023-07-17 | PDF 93.6 KB |
| US agent | Attestation Statements | 2023-07-17 | PDF 84.8 KB |
| Declaration Letter of Model Difference | Cover Letter(s) | 2023-07-17 | PDF 83.6 KB |
| FCC Confidentiality request letter | Cover Letter(s) | 2023-07-17 | PDF 134.7 KB |
| FCC Declaration of Disable WLAN Channel 12 and 13 | Cover Letter(s) | 2023-07-17 | PDF 102.8 KB |
| FCC POA | Cover Letter(s) | 2023-07-17 | PDF 110 KB |
| FCC UNII Device Declaration Letter-Slaver | Cover Letter(s) | 2023-07-17 | PDF 173.5 KB |
| FCC RF Exposure-MPE | RF Exposure Info | 2023-07-17 | PDF 179.8 KB |
| block diagram Metadata only | Block Diagram | PDF 10.4 KB | |
| schematic Metadata only | Schematics | PDF 402.6 KB | |
| Operation Description Metadata only | Operational Description | PDF 141.4 KB | |
| Declaration Letter of Software Security Requirements-Slaver Metadata only | SDR Software/Security Inf | PDF 593.7 KB |
Application Information
| Application ID | M7vmrj7kgxV7/Xeo2qr1aw== |
|---|---|
| Final Action Date | 2023-07-17 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0032060733 |
| Model | MARS4 |
| Frequency Range | 5775 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | UV Photocuring 3D Printer |
| Responsible Party | Cai PengYue, p.cai@elegoo.com , 13539539272 |
| Test Firm | Coin Tang, Dongguan Yaxu (AiT) Technology Limited, info@aitek.org.cn  , +86 0769-82020499-21 |
| TCB Email | joergkusig@eurofins.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| M7vmrj7kgxV7/Xeo2qr1aw== | 2023-07-17 | Original Equipment |
| +uV4K7yFQjgPxqg3l83GtQ== | 2023-07-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application M7vmrj7kgxV7/Xeo2qr1aw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 07/17/2023 Application Dated: 07/17/2023 |
| SHENZHEN ELEGOO TECHNOLOGY CO., LTD. |
| 101, No.30, Dahe Industrial Zone, |
| Guancheng Community, Guanhu Street, Longhua |
| District, Shenzhen, Chin, China |
| Attention: Cai PengYue |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A5HX-MARS4 |
| Name of Grantee: | SHENZHEN ELEGOO TECHNOLOGY CO., LTD. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | UV Photocuring 3D Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0286 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.026 | ||
| CC | 15E | 5210.0 - 5210.0 | 0.0265 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0146 | ||
| CC | 15E | 5755.0 - 5795.0 | 0.0128 | ||
| CC | 15E | 5775.0 - 5775.0 | 0.0119 |
| Output power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application M7vmrj7kgxV7/Xeo2qr1aw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHENZHEN ELEGOO TECHNOLOGY CO., LTD. 101, No.30, Dahe Industrial Zone, Guancheng Community, Guanhu Street, Longhua District, Shenzhen, Chin, China |
Date of Grant: 07/17/2023 Application Dated: 07/17/2023 |
| Attention: Cai PengYue |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A5HX-MARS4 |
| Name of Grantee: | SHENZHEN ELEGOO TECHNOLOGY CO., LTD. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | UV Photocuring 3D Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0286 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.026 | ||
| CC | 15E | 5210.0 - 5210.0 | 0.0265 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0146 | ||
| CC | 15E | 5755.0 - 5795.0 | 0.0128 | ||
| CC | 15E | 5775.0 - 5775.0 | 0.0119 |
| Output power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 07/17/2023 Application Dated: 07/16/2023 |
| SHENZHEN ELEGOO TECHNOLOGY CO., LTD. |
| 101, No.30, Dahe Industrial Zone, |
| Guancheng Community, Guanhu Street, Longhua |
| District, Shenzhen, Chin, China |
| Attention: Cai PengYue |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A5HX-MARS4 |
| Name of Grantee: | SHENZHEN ELEGOO TECHNOLOGY CO., LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | UV Photocuring 3D Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0258 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.0216 |
| Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +uV4K7yFQjgPxqg3l83GtQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHENZHEN ELEGOO TECHNOLOGY CO., LTD. 101, No.30, Dahe Industrial Zone, Guancheng Community, Guanhu Street, Longhua District, Shenzhen, Chin, China |
Date of Grant: 07/17/2023 Application Dated: 07/16/2023 |
| Attention: Cai PengYue |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A5HX-MARS4 |
| Name of Grantee: | SHENZHEN ELEGOO TECHNOLOGY CO., LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | UV Photocuring 3D Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0258 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.0216 |
| Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |