FCC ID 2A5HX-PHECDA
UV Photocuring 3D Printer
by SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
Grantee Code: 2A5HX Product Code: PHECDA
Latest application date: 2023-07-16
FCC ID Device Details
| FCC ID | 2A5HX-PHECDA |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2A5HX |
| Product Code | PHECDA |
| Applicant Business | SHENZHEN ELEGOO TECHNOLOGY CO., LTD. 🇨🇳 |
| Related Domains |  elegoo.com |
| Equipment Class | UV Photocuring 3D Printer |
| Test Firm | Dongguan Yaxu (AiT) Technology Limited |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5825 MHz | Original Equipment | 2023-07-16 |
| 2412-2462 MHz | Original Equipment | 2023-07-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2023-07-16 | PDF 1.3 MB |
| Internal Photos | Internal Photos | 2023-07-16 | PDF 2.8 MB |
| External Photos | External Photos | 2023-07-16 | PDF 4 MB |
| FCC ID Label and location | ID Label/Location Info | 2023-07-16 | PDF 101.4 KB |
| Test Setup Photos | Test Setup Photos | 2023-07-16 | PDF 324 KB |
| Antenna Specification | Test Report | 2023-07-16 | PDF 469.2 KB |
| Appendix C-RF Test Data for 2.4GWIFI | Test Report | 2023-07-16 | PDF 3.1 MB |
| Appendix D-RF Test Data for B1 WIFI | Test Report | 2023-07-16 | PDF 5 MB |
| Appendix E-RF Test Data for 5.8GWIFI | Test Report | 2023-07-16 | PDF 5 MB |
| Test Report- 5.8GWIFI | Test Report | 2023-07-16 | PDF 675.2 KB |
| Test Report- B1 WiFi | Test Report | 2023-07-16 | PDF 707.7 KB |
| Test Report-2.4G WiFi | Test Report | 2023-07-16 | PDF 729.6 KB |
| Covered Equipment Attestation_2.911(d)(5)(i) and (ii) | Attestation Statements | 2023-07-16 | PDF 93.6 KB |
| US_Agent_2.911(d)(7)-U_V05 | Attestation Statements | 2023-07-16 | PDF 387.9 KB |
| Declaration Letter of Model Difference | Cover Letter(s) | 2023-07-16 | PDF 83 KB |
| FCC Confidentiality request letter | Cover Letter(s) | 2023-07-16 | PDF 134.2 KB |
| FCC Declaration of Disable WLAN Channel 12 and 13 | Cover Letter(s) | 2023-07-16 | PDF 101.3 KB |
| FCC POA | Cover Letter(s) | 2023-07-16 | PDF 107.6 KB |
| FCC UNII Device Declaration Letter-Slaver | Cover Letter(s) | 2023-07-16 | PDF 169.9 KB |
| FCC RF Exposure-MPE | RF Exposure Info | 2023-07-16 | PDF 171.7 KB |
| Block Diagram Metadata only | Block Diagram | PDF 170 KB | |
| Schematic Metadata only | Schematics | PDF 568.3 KB | |
| Operation Description Metadata only | Operational Description | PDF 108.8 KB | |
| Declaration Letter of Software Security Requirements-Slaver Metadata only | SDR Software/Security Inf | PDF 592.8 KB |
Application Information
| Application ID | Tcc8VEBuOLT46xmJsEUjhA== |
|---|---|
| Final Action Date | 2023-07-16 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0032060733 |
| Model | PHECDA |
| Frequency Range | 5745-5825 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | UV Photocuring 3D Printer |
| Responsible Party | Cai PengYue, p.cai@elegoo.com , 13539539272 |
| Test Firm | Coin Tang, Dongguan Yaxu (AiT) Technology Limited, info@aitek.org.cn  , +86 0769-82020499-21 |
| TCB Email | joergkusig@eurofins.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Tcc8VEBuOLT46xmJsEUjhA== | 2023-07-16 | Original Equipment |
| 3R4CRBCtmU+fQ8gwOAGzHw== | 2023-07-16 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Tcc8VEBuOLT46xmJsEUjhA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 07/16/2023 Application Dated: 07/16/2023 |
| SHENZHEN ELEGOO TECHNOLOGY CO., LTD. |
| 101, No.30, Dahe Industrial Zone, |
| Guancheng Community, Guanhu Street, Longhua |
| District, Shenzhen, Chin, China |
| Attention: Cai PengYue |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A5HX-PHECDA |
| Name of Grantee: | SHENZHEN ELEGOO TECHNOLOGY CO., LTD. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | UV Photocuring 3D Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0262 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.014 |
| Output Power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Tcc8VEBuOLT46xmJsEUjhA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHENZHEN ELEGOO TECHNOLOGY CO., LTD. 101, No.30, Dahe Industrial Zone, Guancheng Community, Guanhu Street, Longhua District, Shenzhen, Chin, China |
Date of Grant: 07/16/2023 Application Dated: 07/16/2023 |
| Attention: Cai PengYue |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A5HX-PHECDA |
| Name of Grantee: | SHENZHEN ELEGOO TECHNOLOGY CO., LTD. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | UV Photocuring 3D Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0262 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.014 |
| Output Power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Product Service GmbH Storkower Strasse 38c D-15526 Reichenwalde, Germany |
Date of Grant: 07/16/2023 Application Dated: 07/16/2023 |
| SHENZHEN ELEGOO TECHNOLOGY CO., LTD. |
| 101, No.30, Dahe Industrial Zone, |
| Guancheng Community, Guanhu Street, Longhua |
| District, Shenzhen, Chin, China |
| Attention: Cai PengYue |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A5HX-PHECDA |
| Name of Grantee: | SHENZHEN ELEGOO TECHNOLOGY CO., LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | UV Photocuring 3D Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0285 |
| Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 3R4CRBCtmU+fQ8gwOAGzHw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHENZHEN ELEGOO TECHNOLOGY CO., LTD. 101, No.30, Dahe Industrial Zone, Guancheng Community, Guanhu Street, Longhua District, Shenzhen, Chin, China |
Date of Grant: 07/16/2023 Application Dated: 07/16/2023 |
| Attention: Cai PengYue |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A5HX-PHECDA |
| Name of Grantee: | SHENZHEN ELEGOO TECHNOLOGY CO., LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | UV Photocuring 3D Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.0285 |
| Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |