1. FCC ID
  2. 2A5HX
  3. 2A5HX-SATURN4U16K

FCC ID 2A5HX-SATURN4U16K

UV Photocuring 3D Printer

by SHENZHEN ELEGOO TECHNOLOGY CO., LTD.

Grantee Code: 2A5HX   Product Code: SATURN4U16K
Latest application date: 2024-11-06

FCC ID Device Details

FCC ID2A5HX-SATURN4U16K
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A5HX
Product CodeSATURN4U16K
Applicant BusinessSHENZHEN ELEGOO TECHNOLOGY CO., LTD. 🇨🇳
Related Domains elegoo.com
Equipment ClassUV Photocuring 3D Printer
Test FirmDongguan Yaxu (AiT) Technology Limited

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2024-11-06
2412-2462 MHzOriginal Equipment2024-11-06

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2025-05-06PDF 4.3 MB
Internal PhotosInternal Photos2025-05-06PDF 2.9 MB
External PhotosExternal Photos2025-05-06PDF 979.2 KB
label and locationID Label/Location Info2024-11-06PDF 99.6 KB
Test Setup PhotosTest Setup Photos2025-05-06PDF 1.3 MB
5G WiFi Test ReportTest Report2024-11-06PDF 1.1 MB
Antenna SpecificationTest Report2024-11-06PDF 795.2 KB
Appendix C_RF Test Data for 2.4GWIFI_part 1Test Report2024-11-06PDF 4.9 MB
Appendix C_RF Test Data for 2.4GWIFI_part 2Test Report2024-11-06PDF 2.5 MB
Appendix D_RF Test Data for 5.2GWIFI_part 1Test Report2024-11-06PDF 5.4 MB
Appendix D_RF Test Data for 5.2GWIFI_part 2Test Report2024-11-06PDF 5 MB
Appendix E_RF Test Data for 5.8GWIFI_part 1Test Report2024-11-06PDF 5.4 MB
Appendix E_RF Test Data for 5.8GWIFI_part 2Test Report2024-11-06PDF 5 MB
Test Report-2.4G WiFiTest Report2024-11-06PDF 1 MB
Covered Equipment Attestation_2.911(d)(5)(i) and (ii)Attestation Statements2024-11-06PDF 98.1 KB
US_AgentAttestation Statements2024-11-06PDF 129.1 KB
FCC Confidentiality request letterCover Letter(s)2024-11-06PDF 143.9 KB
FCC Declaration of Disable WLAN Channel 12 and 13Cover Letter(s)2024-11-06PDF 108.4 KB
FCC POACover Letter(s)2024-11-06PDF 114.4 KB
FCC UNII Device Declaration Letter-SlaverCover Letter(s)2024-11-06PDF 177.3 KB
FCC RF Exposure-MPE(20cm)RF Exposure Info2024-11-06PDF 175.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 119.6 KB
Schematic Metadata onlySchematicsPDF 649.2 KB
Operation Description Metadata onlyOperational DescriptionPDF 181.5 KB
Declaration Letter of Software Security Requirements-Slaver Metadata onlySDR Software/Security Info.PDF 597.6 KB

Application Information

Application IDx2xIkBfPCDfTd5YTAIsvpA==
Final Action Date2024-11-06
Application PurposeOriginal Equipment
Applicant FRN0032060733
ModelSATURN4U16K
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionUV Photocuring 3D Printer
Responsible PartyCai PengYue, p.cai@elegoo.com , 13539539272
Test FirmCoin Tang, Dongguan Yaxu (AiT) Technology Limited, info@aitek.org.cn , +86 0769-82020499-21
TCB Emailjoerdismitzloff@eurofins.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date05/06/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
x2xIkBfPCDfTd5YTAIsvpA==2024-11-06Original Equipment
M1ICvuYJDy7S17Otu+NFkA==2024-11-06Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.025100015CCC
5180-5240 MHz0.027315ECC
5745-5825 MHz0.013915ECC

Grants

TCB Grant - Application x2xIkBfPCDfTd5YTAIsvpA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 11/06/2024

Application Dated: 11/06/2024
SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
101, No.30, Dahe Industrial Zone,
Guancheng Community, Guanhu Street, Longhua
District, Shenzhen, Chin,
China
 
Attention: Cai PengYue

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A5HX-SATURN4U16K
Name of Grantee:  SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: UV Photocuring 3D Printer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0273  
CC 15E 5745.0  -  5825.0 0.0139  

Output power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application x2xIkBfPCDfTd5YTAIsvpA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
101, No.30, Dahe Industrial Zone, Guancheng Community, Guanhu Street, Longhua
District, Shenzhen, Chin,
China 		  Date of Grant: 11/06/2024

Application Dated: 11/06/2024
 
Attention: Cai PengYue

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A5HX-SATURN4U16K
Name of Grantee:  SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: UV Photocuring 3D Printer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0273  
CC 15E 5745.0  -  5825.0 0.0139  

Output power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application M1ICvuYJDy7S17Otu+NFkA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 11/06/2024

Application Dated: 11/06/2024
SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
101, No.30, Dahe Industrial Zone,
Guancheng Community, Guanhu Street, Longhua
District, Shenzhen, Chin,
China
 
Attention: Cai PengYue

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A5HX-SATURN4U16K
Name of Grantee:  SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: UV Photocuring 3D Printer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.0251  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application M1ICvuYJDy7S17Otu+NFkA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
101, No.30, Dahe Industrial Zone, Guancheng Community, Guanhu Street, Longhua
District, Shenzhen, Chin,
China 		  Date of Grant: 11/06/2024

Application Dated: 11/06/2024
 
Attention: Cai PengYue

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A5HX-SATURN4U16K
Name of Grantee:  SHENZHEN ELEGOO TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: UV Photocuring 3D Printer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2412.0  -  2462.0 0.0251  

Output Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: