FCC ID 2A64G-X1
Projector
by Shenzhen Ejiale Digital Technology CO.,Ltd.
Grantee Code: 2A64G Product Code: X1
Latest application date: 2022-10-14
FCC ID Device Details
| FCC ID | 2A64G-X1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2A64G |
| Product Code | X1 |
| Applicant Business | Shenzhen Ejiale Digital Technology CO.,Ltd. 🇨🇳 |
| Equipment Class | Projector |
| Test Firm | Shenzhen HUAK Testing Technology Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2022-10-14 |
| 2402-2480 MHz | Original Equipment | 2022-10-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2023-04-11 | PDF 423.1 KB |
| Internal Photos | Internal Photos | 2023-04-11 | PDF 3.3 MB |
| External Photo | External Photos | 2023-04-11 | PDF 2.1 MB |
| Label and Location | ID Label/Location Info | 2022-10-14 | PDF 49.6 KB |
| Test Setup Photos | Test Setup Photos | 2023-04-11 | PDF 513.2 KB |
| Antenna Specification | Test Report | 2022-10-14 | PDF 1.7 MB |
| Test Report | Test Report | 2022-10-14 | PDF 3.9 MB |
| Test Report | Test Report | 2022-10-14 | PDF 5.4 MB |
| AgentAuthorizationRev1.0 | Cover Letter(s) | 2022-10-14 | PDF 37.8 KB |
| FCC Short_Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2022-10-14 | PDF 19.2 KB |
| Model Difference Declaration | Cover Letter(s) | 2022-10-14 | PDF 2.8 MB |
| MPE | RF Exposure Info | 2022-10-14 | PDF 13.5 KB |
| BlockDiagram Metadata only | Block Diagram | PDF 37.2 KB | |
| SCH Metadata only | Schematics | PDF 578.7 KB | |
| OP Metadata only | Operational Description | PDF 75.6 KB |
Application Information
| Application ID | 9oAkqGAxmY1NvEQGGonNjg== |
|---|---|
| Final Action Date | 2022-10-14 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0032457301 |
| Model | X1 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Projector |
| Responsible Party | Yin Bo, 1205764125@qq.com  , 18938685122 |
| Technical Contact | Shenzhen Ejiale Digital Technology CO.,Ltd., 1205764125@qq.com |
| Test Firm | Jason Zhou, Shenzhen HUAK Testing Technology Co., Ltd., jason@cer-mark.com  , +86-755-23029901 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/11/2023 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 9oAkqGAxmY1NvEQGGonNjg== | 2022-10-14 | Original Equipment |
| 7/tXbV1O3eADDYHTDHGusw== | 2022-10-14 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application 9oAkqGAxmY1NvEQGGonNjg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/14/2022 Application Dated: 10/14/2022 |
| Shenzhen Ejiale Digital Technology CO.,Ltd. |
| Room 301, No.80-4 Dahe Road, Guancheng Community, |
| Guanhu Street, Longhua District, |
| Shenzhen City, Guangdong Province, 518000 China |
| Attention: Yin Bo |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A64G-X1 |
| Name of Grantee: | Shenzhen Ejiale Digital Technology CO.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Projector |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.20417 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 9oAkqGAxmY1NvEQGGonNjg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Ejiale Digital Technology CO.,Ltd. Room 301, No.80-4 Dahe Road, Guancheng Community, Guanhu Street, Longhua District, Shenzhen City, Guangdong Province, 518000 China |
Date of Grant: 10/14/2022 Application Dated: 10/14/2022 |
| Attention: Yin Bo |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A64G-X1 |
| Name of Grantee: | Shenzhen Ejiale Digital Technology CO.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Projector |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.20417 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/14/2022 Application Dated: 10/14/2022 |
| Shenzhen Ejiale Digital Technology CO.,Ltd. |
| Room 301, No.80-4 Dahe Road, Guancheng Community, |
| Guanhu Street, Longhua District, |
| Shenzhen City, Guangdong Province, 518000 China |
| Attention: Yin Bo |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A64G-X1 |
| Name of Grantee: | Shenzhen Ejiale Digital Technology CO.,Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Projector |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00193 |
| Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 7/tXbV1O3eADDYHTDHGusw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Ejiale Digital Technology CO.,Ltd. Room 301, No.80-4 Dahe Road, Guancheng Community, Guanhu Street, Longhua District, Shenzhen City, Guangdong Province, 518000 China |
Date of Grant: 10/14/2022 Application Dated: 10/14/2022 |
| Attention: Yin Bo |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A64G-X1 |
| Name of Grantee: | Shenzhen Ejiale Digital Technology CO.,Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Projector |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00193 |
| Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |