FCC ID 2A66W-CM116A

Car Multimedia system

by UG ELECTRONICS LIMITED

Grantee Code: 2A66W   Product Code: CM116A
Latest application date: 2022-07-04

FCC ID Device Details

FCC ID2A66W-CM116A
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A66W
Product CodeCM116A
Applicant BusinessUG ELECTRONICS LIMITED
Equipment ClassCar Multimedia system
Test FirmShenzhen Tongzhou Testing Co., LTD

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2022-07-04
2422-2452 MHzOriginal Equipment2022-07-04

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2022-07-04PDF 4.1 MB
Internal PhotosInternal Photos2022-07-04PDF 1.3 MB
External PhotosExternal Photos2022-07-04PDF 640.6 KB
Label&Label LocationID Label/Location Info2022-07-04PDF 151.7 KB
Test Setup PhotosTest Setup Photos2022-07-04PDF 209.6 KB
Appendix ATest DataforBT(BR EDR)_part 1Test Report2022-07-04PDF 3.5 MB
Appendix ATest DataforBT(BR EDR)_part 2Test Report2022-07-04PDF 2.6 MB
DSS_test reportTest Report2022-07-04PDF 834.5 KB
DTS_test reportTest Report2022-07-04PDF 5.5 MB
Declaration Letter of Model DifferenceCover Letter(s)2022-07-04PDF 81.4 KB
FCC Confidentiality request letterCover Letter(s)2022-07-04PDF 134 KB
FCC Declaration of Disable WLAN Channel 12 and 13Cover Letter(s)2022-07-04PDF 98.5 KB
FCC POACover Letter(s)2022-07-04PDF 108 KB
RF ExposureRF Exposure Info2022-07-04PDF 92 KB
block diagram Metadata onlyBlock DiagramPDF 464 KB
schematic Metadata onlySchematicsPDF 451.3 KB
Declaration concerning Antenna Specification Metadata onlyOperational DescriptionPDF 116.8 KB
Operation description Metadata onlyOperational DescriptionPDF 207.3 KB

Application Information

Application IDMFK2HR8fshZhcQf8kBSYHg==
Final Action Date2022-07-04
Application PurposeOriginal Equipment
Applicant FRN0032478232
ModelCM116A
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionCar Multimedia system
Responsible PartyWang Nan, 461305952@qq.com , 00852-35636706
Test FirmAndy Zhang, Shenzhen Tongzhou Testing Co., LTD, Andy.Zhang@sztz-testing.com , +86-755-32902198
TCB Emailjoergkusig@eurofins.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
MFK2HR8fshZhcQf8kBSYHg==2022-07-04Original Equipment
+KFPJxNRhLsK1yE1TW5LOQ==2022-07-04Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.003700015C
2412-2462 MHz0.018315C
2422-2452 MHz0.019515C

Grants

TCB Grant - Application MFK2HR8fshZhcQf8kBSYHg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 07/04/2022

Application Dated: 07/03/2022
UG ELECTRONICS LIMITED
Room 908, 9/F YAN HING CENTRE 9-13
WONG CHUK YEUNG STREET
SHATIN N.T.,
Hong Kong
 
Attention: Wang Nan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A66W-CM116A
Name of Grantee:  UG ELECTRONICS LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Car Multimedia system
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0037  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application MFK2HR8fshZhcQf8kBSYHg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

UG ELECTRONICS LIMITED
Room 908, 9/F YAN HING CENTRE 9-13 WONG CHUK YEUNG STREET
SHATIN N.T.,
Hong Kong
  Date of Grant: 07/04/2022

Application Dated: 07/03/2022
 
Attention: Wang Nan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A66W-CM116A
Name of Grantee:  UG ELECTRONICS LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Car Multimedia system
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0037  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



TCB Grant - Application +KFPJxNRhLsK1yE1TW5LOQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany
Date of Grant: 07/04/2022

Application Dated: 07/04/2022
UG ELECTRONICS LIMITED
Room 908, 9/F YAN HING CENTRE 9-13
WONG CHUK YEUNG STREET
SHATIN N.T.,
Hong Kong
 
Attention: Wang Nan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A66W-CM116A
Name of Grantee:  UG ELECTRONICS LIMITED
Equipment Class: Digital Transmission System
Notes: Car Multimedia system
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0183  
15C 2422.0  -  2452.0 0.0195  

Output power listed is average conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application +KFPJxNRhLsK1yE1TW5LOQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

UG ELECTRONICS LIMITED
Room 908, 9/F YAN HING CENTRE 9-13 WONG CHUK YEUNG STREET
SHATIN N.T.,
Hong Kong
  Date of Grant: 07/04/2022

Application Dated: 07/04/2022
 
Attention: Wang Nan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A66W-CM116A
Name of Grantee:  UG ELECTRONICS LIMITED
Equipment Class: Digital Transmission System
Notes: Car Multimedia system
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0183  
15C 2422.0  -  2452.0 0.0195  

Output power listed is average conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



Mail To: