FCC ID 2A6NFEC2832

Bluetooth low energy / ANT Module

by KAGA FEI Co., Ltd.

Grantee Code: 2A6NF   Product Code: EC2832
Latest application date: 2022-11-28

FCC ID Device Details

FCC ID2A6NFEC2832
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A6NF
Product CodeEC2832
Applicant BusinessKAGA FEI Co., Ltd. 🇯🇵
Related Domains jp.kagafei.com
Equipment ClassBluetooth low energy / ANT Module
Test FirmUL Japan, Inc. KASHIMA EMC LABORATORY

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2022-11-28
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: RYYEYSHCN Grant Date: 08/10/20172022-10-31

Exhibits

DocumentTypeAvailableFile
05 Short-Term Confidential_User ManualUsers Manual2023-05-28PDF 160 KB
05 User ManualUsers Manual2022-10-31PDF 161.7 KB
04 Short-Term Confidential_Internal PhotoInternal Photos2023-05-28PDF 105.1 KB
04 Short-Term Confidential_External PhotoExternal Photos2023-05-28PDF 144.4 KB
04 External PhotoExternal Photos2022-10-31PDF 74.6 KB
06 Label and LocationID Label/Location Info2022-10-31PDF 47.2 KB
03 Short-Term Confidential_FCC Test Setup Photo_DTSTest Setup Photos2023-05-28PDF 243.1 KB
03 Antenna SpecificationTest Report2022-11-28PDF 552.6 KB
03 FCC Test Report_DTSTest Report2022-11-28PDF 1.2 MB
02 FCC Authorization LetterCover Letter(s)2022-11-28PDF 56.6 KB
02 FCC Class II Permissive Change LetterCover Letter(s)2022-11-28PDF 101.5 KB
02 FCC Declaration of Professional Installation_softwareCover Letter(s)2022-11-28PDF 48.6 KB
02 FCC Request for Confidentiality LetterCover Letter(s)2022-11-28PDF 53.8 KB
02 FCC Request for Short-term Confidentiality LetterCover Letter(s)2022-11-28PDF 37.1 KB
02 FCC Declaration Letter of Changing ID_New applicantCover Letter(s)2022-10-31PDF 39.8 KB
02 FCC Declaration Letter of Changing ID_Original applicantCover Letter(s)2022-10-31PDF 134 KB
02 FCC MA LetterCover Letter(s)2022-10-31PDF 49.2 KB
03 FCC RF ExposureRF Exposure Info2022-11-28PDF 156.9 KB
08 Confidential_Theory of Operation Metadata onlyOperational DescriptionPDF 404.8 KB

Application Information

Application IDZDqKVBX9NFUNP+KANMJ//Q==
Final Action Date2022-11-28
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0032316325
ModelEC2832
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionBluetooth low energy / ANT Module
Responsible PartyMikio Aoki, Deputy executive manager, ml-module_product_dev_cert@jp.kagafei.com , +81273815797
AgentAkiko Akiko Akiko, UL Japan, Inc., Akiko.Nishimura@ul.com , 81-596-24-8999
Technical ContactKazuhiro Ando, UL Japan, Inc., Kazuhiro.Ando@ul.com , 81-478-88-6500
Test FirmMr. Shin-ichi Deoka, UL Japan, Inc. KASHIMA EMC LABORATORY, Shinichi.Deoka@ul.com , 81-478-88-6500
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date05/28/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has a 1 MHz and 2 MHz bandwidth mode(4 modes).

Applications

Application IDDatePurpose
ZDqKVBX9NFUNP+KANMJ//Q==2022-11-28Class II permissive change or modification of presently authorized equipment
bIQrvebwV50vgstUOpqPag==2022-10-31Change in identification of presently authorized equipment. Original FCC ID: RYYEYSHCN Grant Date: 08/10/2017

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.003100015C

Grants

TCB Grant - Application ZDqKVBX9NFUNP+KANMJ//Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 11/28/2022

Application Dated: 11/28/2022
KAGA FEI Co., Ltd.
382-1 Kaminamie-machi
Gunseisha ANNEX Building 5th floor
Takasaki Gunma, 370-0801
Japan
 
Attention: Mikio Aoki , Deputy executive manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A6NFEC2832
Name of Grantee:  KAGA FEI Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Bluetooth low energy / ANT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0031  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has a 1 MHz and 2 MHz bandwidth mode(4 modes).

EAS Grant - Application ZDqKVBX9NFUNP+KANMJ//Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

KAGA FEI Co., Ltd.
382-1 Kaminamie-machi Gunseisha ANNEX Building 5th floor
Takasaki Gunma, 370-0801
Japan
  Date of Grant: 11/28/2022

Application Dated: 11/28/2022
 
Attention: Mikio Aoki , Deputy executive manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A6NFEC2832
Name of Grantee:  KAGA FEI Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Bluetooth low energy / ANT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0031  

Class II Permissive Change to add specific antenna described in the filing. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has a 1 MHz and 2 MHz bandwidth mode(4 modes).



TCB Grant - Application bIQrvebwV50vgstUOpqPag==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 10/31/2022

Application Dated: 10/31/2022
KAGA FEI Co., Ltd.
382-1 Kaminamie-machi
Gunseisha ANNEX Building 5th floor
Takasaki Gunma, 370-0801
Japan
 
Attention: Mikio Aoki , Deputy executive manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A6NFEC2832
Name of Grantee:  KAGA FEI Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Bluetooth low energy / ANT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0031  

This application is the Change in ID, but not to affect original certificate: RYYEYSHCN. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has a 1 MHz and 2 MHz bandwidth mode(4 modes).

EAS Grant - Application bIQrvebwV50vgstUOpqPag==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

KAGA FEI Co., Ltd.
382-1 Kaminamie-machi Gunseisha ANNEX Building 5th floor
Takasaki Gunma, 370-0801
Japan
  Date of Grant: 10/31/2022

Application Dated: 10/31/2022
 
Attention: Mikio Aoki , Deputy executive manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A6NFEC2832
Name of Grantee:  KAGA FEI Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Bluetooth low energy / ANT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0031  

This application is the Change in ID, but not to affect original certificate: RYYEYSHCN. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device has a 1 MHz and 2 MHz bandwidth mode(4 modes).



Mail To: