FCC ID 2A7PIWPB84

Wanbo Projector

by Shenzhen wanbo Technology Co., Ltd.

Grantee Code: 2A7PI   Product Code: WPB84
Latest application date: 2025-06-26

FCC ID Device Details

FCC ID2A7PIWPB84
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A7PI
Product CodeWPB84
Applicant BusinessShenzhen wanbo Technology Co., Ltd. 🇨🇳
Related Domains szwanbo.net
Equipment ClassWanbo Projector
Test FirmShenzhen Accurate Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2025-06-26
5180-5240 MHzOriginal Equipment2025-06-26
2402-2480 MHzOriginal Equipment2025-06-26
2412-2462 MHzOriginal Equipment2024-04-15
2402-2480 MHzOriginal Equipment2024-04-15
5180-5240 MHzOriginal Equipment2024-04-15

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2025-06-26PDF 2.2 MB
User ManualUsers Manual2024-04-15PDF 4.9 MB
Internal Photos Part 1Internal Photos2025-06-26PDF 5.6 MB
Internal Photos Part 2Internal Photos2025-06-26PDF 5.2 MB
Internal PhotosInternal Photos2024-04-15PDF 3.6 MB
External Photos Part 1External Photos2025-06-26PDF 4.9 MB
External Photos Part 2External Photos2025-06-26PDF 2.8 MB
External PhotosExternal Photos2024-04-15PDF 1.4 MB
Label & Label LocationID Label/Location Info2025-06-26PDF 442.4 KB
Label InformationID Label/Location Info2024-04-15PDF 526 KB
Label and LocationID Label/Location Info2024-04-15PDF 526 KB
Test Setup PhotosTest Setup Photos2025-06-26PDF 711.6 KB
Test Setup PhotosTest Setup Photos2025-06-26PDF 711.9 KB
Test Setup Photos - 5G WiFiTest Setup Photos2025-06-26PDF 815.7 KB
Test Setup Photos - DFSTest Setup Photos2025-06-26PDF 180.2 KB
Test Setup PhotosTest Setup Photos2024-04-15PDF 881 KB
Test Setup photosTest Setup Photos2024-04-15PDF 881 KB
5G Wi-Fi Test ReportTest Report2025-06-26PDF 896.5 KB
5G Wi-Fi Test Report AppendixTest Report2025-06-26PDF 4.9 MB
Antenna SpecificationTest Report2025-06-26PDF 2.3 MB
DFS Test ReportTest Report2025-06-26PDF 1 MB
Test ReportTest Report2025-06-26PDF 3.9 MB
Test Report - BLETest Report2025-06-26PDF 2.9 MB
Test Report - Wi-Fi Part 1Test Report2025-06-26PDF 2.8 MB
Test Report - Wi-Fi Part 2Test Report2025-06-26PDF 5.4 MB
Appendix A Test Report1Test Report2024-04-15PDF 3.9 MB
Appendix A Test Report2Test Report2024-04-15PDF 2.7 MB
Appendix B Test Report1Test Report2024-04-15PDF 3.9 MB
Appendix B Test Report2Test Report2024-04-15PDF 3 MB
Test ReportTest Report2024-04-15PDF 1.2 MB
Test ReportTest Report2024-04-15PDF 5.4 MB
Test Report 2.4G 1Test Report2024-04-15PDF 4 MB
Test Report BLETest Report2024-04-15PDF 2.5 MB
Test Report2.4G 2Test Report2024-04-15PDF 2.5 MB
2.911 (d)(5)(i) Attestation StatementAttestation Statements2025-06-26PDF 53.2 KB
2.911 (d)(5)(ii) Attestation StatementAttestation Statements2025-06-26PDF 54.6 KB
Attestation LetterAttestation Statements2025-06-26PDF 58.7 KB
US Agent Attestation LetterAttestation Statements2025-06-26PDF 395 KB
Attestation Statements US agent for service of processAttestation Statements2024-04-15PDF 124.9 KB
Attestation of Cover ListAttestation Statements2024-04-15PDF 88.7 KB
DoS LetterCover Letter(s)2025-06-26PDF 61 KB
FCC Agent Authorization LetterCover Letter(s)2025-06-26PDF 65.9 KB
FCC Long-term Confidential RequestCover Letter(s)2025-06-26PDF 73.5 KB
Agent Authorization Letter TemplateCover Letter(s)2024-04-15PDF 122 KB
Antenna ReportCover Letter(s)2024-04-15PDF 1.5 MB
FCC Short Long Term Confidentiality RequestCover Letter(s)2024-04-15PDF 45.3 KB
FCC Software Configuration Control DeclarationCover Letter(s)2024-04-15PDF 324.1 KB
Model differenceCover Letter(s)2024-04-15PDF 56.5 KB
RF ExposureRF Exposure Info2025-06-26PDF 125.9 KB
RF ExposureRF Exposure Info2025-06-26PDF 125.6 KB
RF Exposure - BLERF Exposure Info2025-06-26PDF 125.4 KB
RF Exposure - Wi-FiRF Exposure Info2025-06-26PDF 130.3 KB
FCC-MPERF Exposure Info2024-04-15PDF 238.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 192.5 KB
BlockDiagram Metadata onlyBlock DiagramPDF 91.1 KB
Schematics Metadata onlySchematicsPDF 557 KB
Schematics Metadata onlySchematicsPDF 682.8 KB
OperatingDescription Metadata onlyOperational DescriptionPDF 134.3 KB
Operation Description Metadata onlyOperational DescriptionPDF 4.2 KB
FCC Software Security Requirements Metadata onlySDR Software/Security Info.PDF 239 KB
Software Security Description Metadata onlySDR Software/Security Info.PDF 184.2 KB

Application Information

Application IDrKH1UT2k7AXC4LYx1SDukw==
Final Action Date2025-06-26
Application PurposeOriginal Equipment
Applicant FRN0032598542
ModelWPB84
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionWanbo Projector
Responsible PartyTianchang Yin, ytc@szwanbo.net , 86 075523005266
Test FirmHazel Li, Shenzhen Accurate Technology Co., Ltd., qa@atc-lab.com , 86-755-2650-3290
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
rKH1UT2k7AXC4LYx1SDukw==2025-06-26Original Equipment
5LNuHPuRjchJODPFMN+N0Q==2025-06-26Original Equipment
+5/NXchbMF8La+DZLYZ0Ug==2025-06-26Original Equipment
z7Kih+6rGV3+h3yLsw+IZg==2024-04-15Original Equipment
Utq/j5pnEzIFxDnizCmtdg==2024-04-15Original Equipment
FbDnyoELdKWYr6V/OI6y7g==2024-04-15Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.001515CCC
2402-2480 MHz0.005200015CCC
2402-2480 MHz0.0063CC
2402-2480 MHz0.0062000CC
2412-2462 MHz0.006115CCC
2412-2472 MHz0.2147CC, MO
5180-5240 MHz0.006915ECC
5180-5240 MHz0.027CC, MO
5260-5320 MHz0.0276CC, MO, ND
5500-5720 MHz0.0387CC, MO, ND
5745-5825 MHz0.012715ECC
5745-5825 MHz0.0514CC, MO

Grants

TCB Grant - Application z7Kih+6rGV3+h3yLsw+IZg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  QAI LABORATORIES LTD
3980 North Fraser Way
Burnaby, BC, V5J5K5
Canada
Date of Grant: 04/15/2024

Application Dated: 04/14/2024
Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2
Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PI-WPB84
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wanbo Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0015  
CC 15C 2412.0  -  2462.0 0.0061  

Power listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application z7Kih+6rGV3+h3yLsw+IZg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2 Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China
  Date of Grant: 04/15/2024

Application Dated: 04/14/2024
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PI-WPB84
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wanbo Projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0015  
CC 15C 2412.0  -  2462.0 0.0061  

Power listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Utq/j5pnEzIFxDnizCmtdg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  QAI LABORATORIES LTD
3980 North Fraser Way
Burnaby, BC, V5J5K5
Canada
Date of Grant: 04/15/2024

Application Dated: 04/14/2024
Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2
Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PI-WPB84
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wanbo Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0052  

Power listed is the maximum conducted output power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Utq/j5pnEzIFxDnizCmtdg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2 Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China
  Date of Grant: 04/15/2024

Application Dated: 04/14/2024
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PI-WPB84
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wanbo Projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0052  

Power listed is the maximum conducted output power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application rKH1UT2k7AXC4LYx1SDukw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 06/26/2025

Application Dated: 06/26/2025
Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2
Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China
 
Attention: Tianchang Yin ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PIWPB84
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wanbo Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0062  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application FbDnyoELdKWYr6V/OI6y7g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  QAI LABORATORIES LTD
3980 North Fraser Way
Burnaby, BC, V5J5K5
Canada
Date of Grant: 04/15/2024

Application Dated: 04/14/2024
Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2
Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PI-WPB84
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wanbo Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0069  
CC 15E 5745.0  -  5825.0 0.0127  

Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth.The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application FbDnyoELdKWYr6V/OI6y7g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2 Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China
  Date of Grant: 04/15/2024

Application Dated: 04/14/2024
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PI-WPB84
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wanbo Projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0069  
CC 15E 5745.0  -  5825.0 0.0127  

Power listed is the maximum conducted output power. This device contains 20, 40 and 80 MHz signal bandwidth.The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 5LNuHPuRjchJODPFMN+N0Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 06/26/2025

Application Dated: 06/26/2025
Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2
Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China
 
Attention: Tianchang Yin ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PIWPB84
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wanbo Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.027  
CC MO ND 15E 5260.0  -  5320.0 0.0276  
CC MO ND 15E 5500.0  -  5720.0 0.0387  
CC MO 15E 5745.0  -  5825.0 0.0514  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application +5/NXchbMF8La+DZLYZ0Ug==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 06/26/2025

Application Dated: 06/26/2025
Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2
Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China
 
Attention: Tianchang Yin ,

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PIWPB84
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wanbo Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0063  
CC MO 15C 2412.0  -  2472.0 0.2147  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.