1. FCC ID
  2. 2A7PI
  3. 2A7PIT4

FCC ID 2A7PIT4

Wanbo Projector

by Shenzhen wanbo Technology Co., Ltd.

Grantee Code: 2A7PI   Product Code: T4
Latest application date: 2022-10-08

FCC ID Device Details

FCC ID2A7PIT4
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A7PI
Product CodeT4
Applicant BusinessShenzhen wanbo Technology Co., Ltd. 🇨🇳
Related Domains szwanbo.net
Equipment ClassWanbo Projector
Test FirmShenzhen Tongzhou Testing Co., LTD

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5755-5795 MHzOriginal Equipment2022-10-08
2422-2452 MHzOriginal Equipment2022-10-08
2402-2480 MHzOriginal Equipment2022-10-08

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2022-10-08PDF 2.1 MB
Internal PhotosInternal Photos2022-10-08PDF 904.8 KB
External PhotosExternal Photos2022-10-08PDF 950.9 KB
Label&Label LocationID Label/Location Info2022-10-08PDF 109.8 KB
Setup PhotosTest Setup Photos2022-10-08PDF 283.2 KB
Antenna specificationTest Report2022-10-08PDF 1.1 MB
Appendix Test Data for BT(BDR&EDR)-FCC _part 1Test Report2022-10-08PDF 3.3 MB
Appendix Test Data for BT(BDR&EDR)-FCC _part 2Test Report2022-10-08PDF 2.9 MB
Appendix Test Data for BLETest Report2022-10-08PDF 3.7 MB
Appendix Test Data for RLAN(5.2G)Test Report2022-10-08PDF 4 MB
Appendix Test Data for RLAN(5.8G)Test Report2022-10-08PDF 3.3 MB
Appendix Test Data for WLAN(2.4G)Test Report2022-10-08PDF 5.8 MB
BLE test reportTest Report2022-10-08PDF 667.5 KB
DSS test reportTest Report2022-10-08PDF 706.6 KB
DTS test reportTest Report2022-10-08PDF 873 KB
NII-1 test reportTest Report2022-10-08PDF 916.6 KB
NII-3 test reportTest Report2022-10-08PDF 868.2 KB
Declaration Letter of Model DifferenceCover Letter(s)2022-10-08PDF 99.5 KB
FCC Confidentiality request letterCover Letter(s)2022-10-08PDF 130.9 KB
FCC Declaration of Disable WLAN Channel 12 and 13Cover Letter(s)2022-10-08PDF 99.4 KB
FCC POACover Letter(s)2022-10-08PDF 108.5 KB
FCC UNII Device Declaration Letter-SlaverCover Letter(s)2022-10-08PDF 164.7 KB
RF Exposure-FCC-MPERF Exposure Info2022-10-08PDF 127.8 KB
Block diagram Metadata onlyBlock DiagramPDF 312.1 KB
schematic Metadata onlySchematicsPDF 488.1 KB
Operation description Metadata onlyOperational DescriptionPDF 171.2 KB
Declaration Letter of Software Security Requirements-Slaver Metadata onlySDR Software/Security InfPDF 597.6 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 142.4 KB

Application Information

Application IDTqC77E/+wmUON/lo9p8j+Q==
Final Action Date2022-10-08
Application PurposeOriginal Equipment
Applicant FRN0027571058
ModelT4
Frequency Range5755-5795 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWanbo Projector
Responsible PartyTianchang Yin, ytc@szwanbo.net , 86 075523005266
Test FirmAndy Zhang, Shenzhen Tongzhou Testing Co., LTD, Andy.Zhang@sztz-testing.com , +86-755-32902198
TCB Emailjoergkusig@eurofins.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
TqC77E/+wmUON/lo9p8j+Q==2022-10-08Original Equipment
Mjkxk95LFTwY+u3EdB8WdA==2022-10-08Original Equipment
225Am5CxPMeEXpuPwKedfQ==2022-10-08Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002900015CCC
2402-2480 MHz0.001515CCC
2412-2462 MHz0.034715CCC
2422-2452 MHz0.024415CCC
5180-5240 MHz0.01815ECC
5190-5230 MHz0.021215ECC
5745-5825 MHz0.007215ECC
5755-5795 MHz0.005815ECC

Grants

TCB Grant - Application TqC77E/+wmUON/lo9p8j+Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 10/08/2022

Application Dated: 10/08/2022
Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2
Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PIT4
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wanbo Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.018  
CC 15E 5190.0  -  5230.0 0.0212  
CC 15E 5745.0  -  5825.0 0.0072  
CC 15E 5755.0  -  5795.0 0.0058  

Output power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application TqC77E/+wmUON/lo9p8j+Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2 Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China 		  Date of Grant: 10/08/2022

Application Dated: 10/08/2022
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PIT4
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wanbo Projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.018  
CC 15E 5190.0  -  5230.0 0.0212  
CC 15E 5745.0  -  5825.0 0.0072  
CC 15E 5755.0  -  5795.0 0.0058  

Output power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Mjkxk95LFTwY+u3EdB8WdA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 10/08/2022

Application Dated: 10/08/2022
Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2
Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PIT4
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wanbo Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0015  
CC 15C 2412.0  -  2462.0 0.0347  
CC 15C 2422.0  -  2452.0 0.0244  

Output power listed is average conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Mjkxk95LFTwY+u3EdB8WdA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2 Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China 		  Date of Grant: 10/08/2022

Application Dated: 10/08/2022
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PIT4
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wanbo Projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0015  
CC 15C 2412.0  -  2462.0 0.0347  
CC 15C 2422.0  -  2452.0 0.0244  

Output power listed is average conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 225Am5CxPMeEXpuPwKedfQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 10/08/2022

Application Dated: 10/08/2022
Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2
Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PIT4
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wanbo Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0029  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 225Am5CxPMeEXpuPwKedfQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2 Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China 		  Date of Grant: 10/08/2022

Application Dated: 10/08/2022
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PIT4
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wanbo Projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0029  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: