1. FCC ID
  2. 2A7PI
  3. 2A7PIT6MAX

FCC ID 2A7PIT6MAX

Wanbo Projector

by Shenzhen wanbo Technology Co., Ltd.

Grantee Code: 2A7PI   Product Code: T6MAX
Latest application date: 2022-07-11

FCC ID Device Details

FCC ID2A7PIT6MAX
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A7PI
Product CodeT6MAX
Applicant BusinessShenzhen wanbo Technology Co., Ltd. 🇨🇳
Related Domains szwanbo.net
Equipment ClassWanbo Projector
Test FirmShenzhen Tongzhou Testing Co., LTD

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2022-07-11
5180-5240 MHzOriginal Equipment2022-07-11
2402-2480 MHzOriginal Equipment2022-07-10

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2022-07-11PDF 2.1 MB
Internal PhotosInternal Photos2022-07-11PDF 1.2 MB
External PhotosExternal Photos2022-07-11PDF 1.5 MB
Label&Label LocationID Label/Location Info2022-07-11PDF 292.3 KB
Test Setup PhotosTest Setup Photos2022-07-11PDF 294.2 KB
Appendix Test Data for 2.4GWIFITest Report2022-07-11PDF 5.7 MB
Appendix Test Data for 5.2GWIFITest Report2022-07-11PDF 4.3 MB
Appendix Test Data for 5.8GWIFITest Report2022-07-11PDF 3.7 MB
Appendix Test Data for BLETest Report2022-07-11PDF 1.9 MB
Test Report-2.4GWIFITest Report2022-07-11PDF 846.2 KB
Test Report-5.2GWIFITest Report2022-07-11PDF 907.3 KB
Test Report-5.8GWIFITest Report2022-07-11PDF 843.6 KB
Test Report-BLETest Report2022-07-11PDF 637.5 KB
Appendix Test Data for BT_Part 1Test Report2022-07-10PDF 4.4 MB
Appendix Test Data for BT_Part 2Test Report2022-07-10PDF 1.8 MB
Test Report-BTTest Report2022-07-10PDF 693.7 KB
Declaration Letter of Model DifferenceCover Letter(s)2022-07-11PDF 157.7 KB
FCC Confidentiality request letterCover Letter(s)2022-07-11PDF 220.5 KB
FCC Declaration of Disable WLAN Channel 12 and 13Cover Letter(s)2022-07-11PDF 172.4 KB
FCC POACover Letter(s)2022-07-11PDF 180 KB
FCC UNII Device Declaration Letter-SlaverCover Letter(s)2022-07-11PDF 284.4 KB
RF Exposure-FCC-MPERF Exposure Info2022-07-11PDF 127.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 81.2 KB
Schematic Metadata onlySchematicsPDF 341.8 KB
Schematic WiFi modular Metadata onlySchematicsPDF 88.6 KB
Declaration concerning Antenna Specification Metadata onlyOperational DescriptionPDF 214.6 KB
Operation description Metadata onlyOperational DescriptionPDF 1.2 MB
Declaration Letter of Software Security Requirements-Slaver Metadata onlySDR Software/Security InfPDF 978.8 KB

Application Information

Application IDwn2P4o5RAslfwYo7Z0Y/gA==
Final Action Date2022-07-11
Application PurposeOriginal Equipment
Applicant FRN0027571058
ModelT6MAX
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWanbo Projector
Responsible PartyTianchang Yin, ytc@szwanbo.net , 86 075523005266
Test FirmAndy Zhang, Shenzhen Tongzhou Testing Co., LTD, Andy.Zhang@sztz-testing.com , +86-755-32902198
TCB Emailjoergkusig@eurofins.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is average conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
wn2P4o5RAslfwYo7Z0Y/gA==2022-07-11Original Equipment
QqU3cT5zTA3gfw47UP3Xjw==2022-07-11Original Equipment
c457ukk5UtCdmgxjPCZPDQ==2022-07-10Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.000900015C
2402-2480 MHz0.000915CCC
2412-2462 MHz0.05515CCC
2422-2452 MHz0.057515CCC
5180-5240 MHz0.009215ECC
5190-5230 MHz0.005915ECC
5210 MHz0.004915ECC
5745-5825 MHz0.017815ECC
5755-5795 MHz0.020815ECC
5775 MHz0.019815ECC

Grants

TCB Grant - Application wn2P4o5RAslfwYo7Z0Y/gA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 07/11/2022

Application Dated: 07/10/2022
Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2
Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PIT6MAX
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wanbo Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0009  
CC 15C 2412.0  -  2462.0 0.055  
CC 15C 2422.0  -  2452.0 0.0575  

Output Power listed is average conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application wn2P4o5RAslfwYo7Z0Y/gA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2 Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China 		  Date of Grant: 07/11/2022

Application Dated: 07/10/2022
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PIT6MAX
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: Wanbo Projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0009  
CC 15C 2412.0  -  2462.0 0.055  
CC 15C 2422.0  -  2452.0 0.0575  

Output Power listed is average conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application QqU3cT5zTA3gfw47UP3Xjw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 07/11/2022

Application Dated: 07/11/2022
Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2
Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PIT6MAX
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wanbo Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0092  
CC 15E 5190.0  -  5230.0 0.0059  
CC 15E 5210.0  -  5210.0 0.0049  
CC 15E 5745.0  -  5825.0 0.0178  
CC 15E 5755.0  -  5795.0 0.0208  
CC 15E 5775.0  -  5775.0 0.0198  

Output Power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application QqU3cT5zTA3gfw47UP3Xjw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2 Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China 		  Date of Grant: 07/11/2022

Application Dated: 07/11/2022
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PIT6MAX
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wanbo Projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.0092  
CC 15E 5190.0  -  5230.0 0.0059  
CC 15E 5210.0  -  5210.0 0.0049  
CC 15E 5745.0  -  5825.0 0.0178  
CC 15E 5755.0  -  5795.0 0.0208  
CC 15E 5775.0  -  5775.0 0.0198  

Output Power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application c457ukk5UtCdmgxjPCZPDQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 07/10/2022

Application Dated: 07/10/2022
Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2
Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PIT6MAX
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wanbo Projector
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0009  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

EAS Grant - Application c457ukk5UtCdmgxjPCZPDQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shenzhen wanbo Technology Co., Ltd.
4th Floor, Building 1, Chuangjian Phase 2 Industrial Park, Yingrenshi Community,
Shiyan Street, Baoan District, Shenzhen,
China 		  Date of Grant: 07/10/2022

Application Dated: 07/10/2022
 
Attention: Tianchang Yin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A7PIT6MAX
Name of Grantee:  Shenzhen wanbo Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wanbo Projector
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0009  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.



Mail To: