FCC ID 2A8I8-1000350
ISM Radio
by Fort Robotics Inc.
Grantee Code: 2A8I8 Product Code: 1000350
Latest application date: 2023-05-23
FCC ID Device Details
| FCC ID | 2A8I8-1000350 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2A8I8 |
| Product Code | 1000350 |
| Applicant Business | Fort Robotics Inc. 🇺🇸 |
| Related Domains |  fortrobotics.com |
| Equipment Class | ISM Radio |
| Test Firm | UltraTech Engineering Labs Inc |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.4-927.65 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-23 |
| 902.4-927.6 MHz | Change in identification of presently authorized equipment. Original FCC ID: NS913P900 Grant Date: 11/17/2016 | 2023-03-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| SRC User Manual | Users Manual | 2023-05-23 | PDF 855.3 KB |
| WES User Manual | Users Manual | 2023-05-23 | PDF 579.8 KB |
| SRC Internal Photos | Internal Photos | 2023-05-23 | PDF 787.1 KB |
| WES Internal Photos | Internal Photos | 2023-05-23 | PDF 1.1 MB |
| SRC External Photos | External Photos | 2023-05-23 | PDF 846 KB |
| WES External Photos | External Photos | 2023-05-23 | PDF 723.9 KB |
| External Photos | External Photos | 2023-03-22 | PDF 280 KB |
| ID Label and Location Info | ID Label/Location Info | 2023-05-23 | PDF 634.7 KB |
| ID Label and Location Info | ID Label/Location Info | 2023-03-22 | PDF 141.6 KB |
| SRC Test Setup | Test Setup Photos | 2023-05-23 | PDF 286.9 KB |
| WES Test Setup | Test Setup Photos | 2023-05-23 | PDF 280.4 KB |
| Antenna Specifications | Test Report | 2023-05-23 | PDF 260.2 KB |
| SRC Test Report | Test Report | 2023-05-23 | PDF 348.9 KB |
| WES Test Report | Test Report | 2023-05-23 | PDF 344.6 KB |
| Duty Cycle | Attestation Statements | 2023-05-23 | PDF 319.6 KB |
| SDoC | Attestation Statements | 2023-05-23 | PDF 310.5 KB |
| Section 2.911(d)(5)(i) | Attestation Statements | 2023-05-23 | PDF 255.3 KB |
| Section 2.911(d)(5)(ii) | Attestation Statements | 2023-05-23 | PDF 243.7 KB |
| Section 2.911(d)(7) | Attestation Statements | 2023-05-23 | PDF 527.2 KB |
| Section 2.911(d)(5)(i) | Attestation Statements | 2023-03-22 | PDF 335.1 KB |
| Section 2.911(d)(5)(ii) | Attestation Statements | 2023-03-22 | PDF 328.3 KB |
| Section 2.911(d)(7) | Attestation Statements | 2023-03-22 | PDF 488.9 KB |
| Agent Authorization | Cover Letter(s) | 2023-05-23 | PDF 372.5 KB |
| C2PC Request | Cover Letter(s) | 2023-05-23 | PDF 444.5 KB |
| Confidentiality Request | Cover Letter(s) | 2023-05-23 | PDF 359.1 KB |
| Applicant Change in ID Request | Cover Letter(s) | 2023-03-22 | PDF 319.1 KB |
| Original Grantee Authorization | Cover Letter(s) | 2023-03-22 | PDF 394.4 KB |
| SRC SAR Report | RF Exposure Info | 2023-05-23 | PDF 1 MB |
| SRC SAR Report Appendix 1 | RF Exposure Info | 2023-05-23 | PDF 784.5 KB |
| SRC SAR Report Appendix 3 | RF Exposure Info | 2023-05-23 | PDF 803.1 KB |
| WES SAR Report | RF Exposure Info | 2023-05-23 | PDF 1,011.9 KB |
| WES SAR Report Appendix 1 | RF Exposure Info | 2023-05-23 | PDF 436.4 KB |
| WES SAR Report Appendix 2 | RF Exposure Info | 2023-05-23 | PDF 1,018.2 KB |
| WES SAR Report Appendix 3 | RF Exposure Info | 2023-05-23 | PDF 199.2 KB |
| Detailed Operational Description Metadata only | Operational Description | PDF 42.8 KB | |
| FCC Inquiry Metadata only | Operational Description | PDF 46.5 KB |
Application Information
| Application ID | iTrNhwuSflP/HfkvMnaf9A== |
|---|---|
| Final Action Date | 2023-05-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0032825267 |
| Model | 1000350 |
| Frequency Range | 902.4-927.65 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | ISM Radio |
| Responsible Party | Eric Zaremski, eric.zaremski@fortrobotics.com , 6102131815 |
| Agent | Dan Dan Dan, UltraTech Engineering Labs Inc, dan@ultratech-labs.com  , 905-829-1570 |
| Test Firm | Tri Luu, UltraTech Engineering Labs Inc, tri@ultratech-labs.com , 905-829-1570 |
| TCB Email | vic@ultratech-labs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Single Modular Approval. Power listed is conducted. The antenna(s) used for this transmitter shall be installed to provide a separation distance of at least 23 cm from all persons. The transmitter antenna shall not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only antennas as described in this filing may be used. Class II Permissive change: The module has been updated with a new equivalent power amplifier part and related circuits. Class II Permissive Change: For portable hosts [Safe Remote Control (SRC) and Wireless Emergency Stop (WES)] as documented in the filing. The operating duty cycle shall not exceed 66.66 % for SRC and 12.5% for WES and end-users shall have no provision to change the duty cycle settings. The highest reported SAR for body exposure condition for SRC (at 66.66% duty cycle) and WES (at 12.5% duty cycle) are 1.20 W/kg and 1.13 W/kg, respectively. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| iTrNhwuSflP/HfkvMnaf9A== | 2023-05-23 | Class II permissive change or modification of presently authorized equipment |
| TUWZ/vjQ2KavfTfppBbm7g== | 2023-03-22 | Change in identification of presently authorized equipment. Original FCC ID: NS913P900 Grant Date: 11/17/2016 |
Grants
TCB Grant - Application TUWZ/vjQ2KavfTfppBbm7g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 03/22/2023 Application Dated: 03/22/2023 |
| Fort Robotics Inc. |
| 1608 Walnut Street |
| Floor 12 |
| Philadelphia, PA 19103 |
| Attention: Eric Zaremski |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A8I8-1000350 |
| Name of Grantee: | Fort Robotics Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | ISM Radio |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BB | 15C | 902.4 - 927.65 | 1.0 | ||
| BB | 15C | 902.4 - 927.6 | 1.0 |
| Single Modular Approval. Power listed is conducted. The antenna(s) used for this transmitter shall be installed to provide a separation distance of at least 23 cm from all persons. The transmitter antenna shall not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only antennas as described in this filing may be used. Class II Permissive change: The module has been update with a new equivalent power amplifier part and related circuits. |
| BB: | Power output continuously variable from value listed to less than 0.5 watts. |
EAS Grant - Application TUWZ/vjQ2KavfTfppBbm7g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fort Robotics Inc. 1608 Walnut Street Floor 12 Philadelphia, PA 19103 United States |
Date of Grant: 03/22/2023 Application Dated: 03/22/2023 |
| Attention: Eric Zaremski |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A8I8-1000350 |
| Name of Grantee: | Fort Robotics Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | ISM Radio |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BB | 15C | 902.4 - 927.65 | 1.0 | ||
| BB | 15C | 902.4 - 927.6 | 1.0 |
| Single Modular Approval. Power listed is conducted. The antenna(s) used for this transmitter shall be installed to provide a separation distance of at least 23 cm from all persons. The transmitter antenna shall not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only antennas as described in this filing may be used. Class II Permissive change: The module has been update with a new equivalent power amplifier part and related circuits. |
| BB: | Power output continuously variable from value listed to less than 0.5 watts. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Ultratech Engineering Labs Inc. 3000 Bristol Circle Oakville Ontario, L6H 6G4 Canada |
Date of Grant: 05/23/2023 Application Dated: 05/17/2023 |
| Fort Robotics Inc. |
| 1608 Walnut Street |
| Floor 12 |
| Philadelphia, PA 19103 |
| Attention: Eric Zaremski |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A8I8-1000350 |
| Name of Grantee: | Fort Robotics Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | ISM Radio |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BB | 15C | 902.4 - 927.65 | 1.0 | ||
| BB | 15C | 902.4 - 927.6 | 1.0 |
| Single Modular Approval. Power listed is conducted. The antenna(s) used for this transmitter shall be installed to provide a separation distance of at least 23 cm from all persons. The transmitter antenna shall not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only antennas as described in this filing may be used. Class II Permissive change: The module has been updated with a new equivalent power amplifier part and related circuits. Class II Permissive Change: For portable hosts [Safe Remote Control (SRC) and Wireless Emergency Stop (WES)] as documented in the filing. The operating duty cycle shall not exceed 66.66 % for SRC and 12.5% for WES and end-users shall have no provision to change the duty cycle settings. The highest reported SAR for body exposure condition for SRC (at 66.66% duty cycle) and WES (at 12.5% duty cycle) are 1.20 W/kg and 1.13 W/kg, respectively. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| BB: | Power output continuously variable from value listed to less than 0.5 watts. |
EAS Grant - Application iTrNhwuSflP/HfkvMnaf9A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Fort Robotics Inc. 1608 Walnut Street Floor 12 Philadelphia, PA 19103 United States |
Date of Grant: 05/23/2023 Application Dated: 05/17/2023 |
| Attention: Eric Zaremski |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A8I8-1000350 |
| Name of Grantee: | Fort Robotics Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | ISM Radio |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BB | 15C | 902.4 - 927.65 | 1.0 | ||
| BB | 15C | 902.4 - 927.6 | 1.0 |
| Single Modular Approval. Power listed is conducted. The antenna(s) used for this transmitter shall be installed to provide a separation distance of at least 23 cm from all persons. The transmitter antenna shall not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only antennas as described in this filing may be used. Class II Permissive change: The module has been updated with a new equivalent power amplifier part and related circuits. Class II Permissive Change: For portable hosts [Safe Remote Control (SRC) and Wireless Emergency Stop (WES)] as documented in the filing. The operating duty cycle shall not exceed 66.66 % for SRC and 12.5% for WES and end-users shall have no provision to change the duty cycle settings. The highest reported SAR for body exposure condition for SRC (at 66.66% duty cycle) and WES (at 12.5% duty cycle) are 1.20 W/kg and 1.13 W/kg, respectively. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. |
| BB: | Power output continuously variable from value listed to less than 0.5 watts. |
| Mail To: |