FCC ID 2A8KP-ENPULSE

ENPULSE

by ARGOSDYNE Co., Ltd.

Grantee Code: 2A8KP   Product Code: ENPULSE
Latest application date: 2023-09-07

FCC ID Device Details

FCC ID2A8KP-ENPULSE
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A8KP
Product CodeENPULSE
Applicant BusinessARGOSDYNE Co., Ltd. 🇰🇷
Related Domains argosdyne.com
Equipment ClassENPULSE
Test FirmCHINA CERTIFICATION ICT CO., LTD (DONGGUAN)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2405-2470 MHzChange in identification of presently authorized equipment. Original FCC ID: 2BBC9-ENPULSE Grant Date: 07/19/20232023-09-07
5735-5865 MHzChange in identification of presently authorized equipment. Original FCC ID: 2BBC9-ENPULSE Grant Date: 07/19/20232023-09-07

Exhibits

DocumentTypeAvailableFile
External PhotosExternal Photos2023-09-07PDF 2.4 MB
Label & Label LocationID Label/Location Info2023-09-07PDF 111.6 KB
2.911 (d)(5)(i)(ii) Attestation StatementAttestation Statements2023-09-07PDF 290 KB
US Agent Attestation LetterAttestation Statements2023-09-07PDF 375.1 KB
Authorization Letter from Original GranteeCover Letter(s)2023-09-07PDF 43.1 KB
Change in ID Request LetterCover Letter(s)2023-09-07PDF 388.1 KB
FCC Agent Authorization LetterCover Letter(s)2023-09-07PDF 322.6 KB

Application Information

Application IDP2tXzTa+tamtmgxtngLQ6Q==
Final Action Date2023-09-07
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: 2BBC9-ENPULSE Grant Date: 07/19/2023
Applicant FRN0032835704
ModelENPULSE
Frequency Range2405-2470 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionENPULSE
Responsible PartyChang Wook Lee, cwlee@argosdyne.com , 82-70-5102-1389
Test FirmTanie Ou, CHINA CERTIFICATION ICT CO., LTD (DONGGUAN), qa@ccttt.com.cn , 0086 0769 86858888
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
P2tXzTa+tamtmgxtngLQ6Q==2023-09-07Change in identification of presently authorized equipment. Original FCC ID: 2BBC9-ENPULSE Grant Date: 07/19/2023
3rk7WOGdGUU7s3kbJbItgQ==2023-09-07Change in identification of presently authorized equipment. Original FCC ID: 2BBC9-ENPULSE Grant Date: 07/19/2023

Equipment Authorization

FrequencyOutputRules
2405-2470 MHz0.323000015C
5735-5865 MHz15C

Grants

TCB Grant - Application P2tXzTa+tamtmgxtngLQ6Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 09/07/2023

Application Dated: 09/07/2023
ARGOSDYNE Co., Ltd.
Dine, Room A 1306, 58-1 Giheung-ro, Giheung-gu
Yongin-si, Gyeonggi-do
Yongin,
South Korea
 
Attention: Chang Wook Lee

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A8KP-ENPULSE
Name of Grantee:  ARGOSDYNE Co., Ltd.
Equipment Class: Digital Transmission System
Notes: ENPULSE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2470.0 0.323  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application P2tXzTa+tamtmgxtngLQ6Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ARGOSDYNE Co., Ltd.
Dine, Room A 1306, 58-1 Giheung-ro, Giheung-gu Yongin-si, Gyeonggi-do
Yongin,
South Korea
  Date of Grant: 09/07/2023

Application Dated: 09/07/2023
 
Attention: Chang Wook Lee

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A8KP-ENPULSE
Name of Grantee:  ARGOSDYNE Co., Ltd.
Equipment Class: Digital Transmission System
Notes: ENPULSE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2470.0 0.323  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 3rk7WOGdGUU7s3kbJbItgQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 09/07/2023

Application Dated: 09/07/2023
ARGOSDYNE Co., Ltd.
Dine, Room A 1306, 58-1 Giheung-ro, Giheung-gu
Yongin-si, Gyeonggi-do
Yongin,
South Korea
 
Attention: Chang Wook Lee

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A8KP-ENPULSE
Name of Grantee:  ARGOSDYNE Co., Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: ENPULSE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 5735.0  -  5865.0  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 3rk7WOGdGUU7s3kbJbItgQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ARGOSDYNE Co., Ltd.
Dine, Room A 1306, 58-1 Giheung-ro, Giheung-gu Yongin-si, Gyeonggi-do
Yongin,
South Korea
  Date of Grant: 09/07/2023

Application Dated: 09/07/2023
 
Attention: Chang Wook Lee

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A8KP-ENPULSE
Name of Grantee:  ARGOSDYNE Co., Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: ENPULSE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 5735.0  -  5865.0  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: