FCC ID 2A92A-RTL8723DS
2.4G 1T1R WIFI+Bluetooth2.1/4.2 SDIO Module
by Wuxi Yolenet Technology Co.,Ltd.
Grantee Code: 2A92A Product Code: RTL8723DS
Latest application date: 2023-01-31
FCC ID Device Details
| FCC ID | 2A92A-RTL8723DS |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2A92A |
| Product Code | RTL8723DS |
| Applicant Business | Wuxi Yolenet Technology Co.,Ltd. 🇨🇳 |
| Related Domains |  yolenet.com |
| Equipment Class | 2.4G 1T1R WIFI+Bluetooth2.1/4.2 SDIO Module |
| Test Firm | Shenzhen Global Test Service Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2023-01-31 |
| 2412-2462 MHz | Original Equipment | 2023-01-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2023-01-31 | PDF 900.3 KB |
| Internal Photos | Internal Photos | 2023-01-31 | PDF 403 KB |
| External Photos | External Photos | 2023-01-31 | PDF 478.3 KB |
| Label & Location | ID Label/Location Info | 2023-01-31 | PDF 135.7 KB |
| Test Setup Photos | Test Setup Photos | 2023-01-31 | PDF 213.2 KB |
| Antenna Specification | Test Report | 2023-01-31 | PDF 723.7 KB |
| Appendix A-Test Data for BT | Test Report | 2023-01-31 | PDF 4.4 MB |
| Appendix B-Test Data for BLE | Test Report | 2023-01-31 | PDF 2.2 MB |
| Appendix C-Test Data for 2.4GWLAN | Test Report | 2023-01-31 | PDF 4.2 MB |
| GTS20221226005-1-7-BT | Test Report | 2023-01-31 | PDF 1.4 MB |
| GTS20221226005-1-8-BLE | Test Report | 2023-01-31 | PDF 684.6 KB |
| GTS20221226005-1-9-WLAN | Test Report | 2023-01-31 | PDF 731 KB |
| Agent Authorization | Cover Letter(s) | 2023-01-31 | PDF 9.9 KB |
| FCC Modular Approval Request | Cover Letter(s) | 2023-01-31 | PDF 87.5 KB |
| FCC Modular Approval Request Rev 3.0 | Cover Letter(s) | 2023-01-31 | PDF 87.5 KB |
| FCC Short & Long Term Confidentiality Request | Cover Letter(s) | 2023-01-31 | PDF 56.6 KB |
| RF Exposure | RF Exposure Info | 2023-01-31 | PDF 491.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 116.6 KB | |
| Schematic Metadata only | Schematics | PDF 45.8 KB | |
| Operation description Metadata only | Operational Description | PDF 276.1 KB |
Application Information
| Application ID | rb31OEBvKRycTVXZfg2oaQ== |
|---|---|
| Final Action Date | 2023-01-31 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0033274812 |
| Model | RTL8723DS |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 2.4G 1T1R WIFI+Bluetooth2.1/4.2 SDIO Module |
| Responsible Party | JIAN HUI, Engineer, S01@yolenet.com , 18261591656 |
| Technical Contact | Wuxi Yolenet Technology Co.,Ltd., S01@yolenet.com |
| Test Firm | Simon Hu, Shenzhen Global Test Service Co., Ltd., huxiaolong@gtscert.com  , 86-137-286-828-40 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rb31OEBvKRycTVXZfg2oaQ== | 2023-01-31 | Original Equipment |
| 1AkqWnXJXEo39q+B4BkHSQ== | 2023-01-31 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application rb31OEBvKRycTVXZfg2oaQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/31/2023 Application Dated: 01/31/2023 |
| Wuxi Yolenet Technology Co.,Ltd. |
| Floor17,Building 3,Zhongao Plaza,Xishan Distirct, |
| Wuxi, China |
| Attention: JIAN HUI , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A92A-RTL8723DS |
| Name of Grantee: | Wuxi Yolenet Technology Co.,Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2.4G 1T1R WIFI+Bluetooth2.1/4.2 SDIO Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0007 |
| Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application rb31OEBvKRycTVXZfg2oaQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Wuxi Yolenet Technology Co.,Ltd. Floor17,Building 3,Zhongao Plaza,Xishan Distirct, Wuxi, China |
Date of Grant: 01/31/2023 Application Dated: 01/31/2023 |
| Attention: JIAN HUI , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A92A-RTL8723DS |
| Name of Grantee: | Wuxi Yolenet Technology Co.,Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2.4G 1T1R WIFI+Bluetooth2.1/4.2 SDIO Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0007 |
| Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/31/2023 Application Dated: 01/31/2023 |
| Wuxi Yolenet Technology Co.,Ltd. |
| Floor17,Building 3,Zhongao Plaza,Xishan Distirct, |
| Wuxi, China |
| Attention: JIAN HUI , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A92A-RTL8723DS |
| Name of Grantee: | Wuxi Yolenet Technology Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4G 1T1R WIFI+Bluetooth2.1/4.2 SDIO Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0085 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1156 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 1AkqWnXJXEo39q+B4BkHSQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Wuxi Yolenet Technology Co.,Ltd. Floor17,Building 3,Zhongao Plaza,Xishan Distirct, Wuxi, China |
Date of Grant: 01/31/2023 Application Dated: 01/31/2023 |
| Attention: JIAN HUI , Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A92A-RTL8723DS |
| Name of Grantee: | Wuxi Yolenet Technology Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4G 1T1R WIFI+Bluetooth2.1/4.2 SDIO Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0085 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1156 |
| Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |