FCC ID 2A93H-IQAIR
WiFi Module
by Enphase Energy, Inc.
Grantee Code: 2A93H Product Code: IQAIR
Latest application date: 2023-05-15
FCC ID Device Details
| FCC ID | 2A93H-IQAIR |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2A93H |
| Product Code | IQAIR |
| Applicant Business | Enphase Energy, Inc. 🇺🇸 |
| Related Domains |  enphaseenergy.com |
| Equipment Class | WiFi Module |
| Test Firm | CKC Laboratories, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-15 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESP32WROVERE Grant Date: 04/13/2020 | 2023-05-10 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESP32WROVERE Grant Date: 04/13/2020 | 2023-05-10 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2023-05-15 | PDF 2.2 MB |
| External Photos | External Photos | 2023-05-15 | PDF 298.8 KB |
| External Photos | External Photos | 2023-05-10 | PDF 214.4 KB |
| ID Label and Location | ID Label/Location Info | 2023-05-10 | PDF 119.1 KB |
| ID Label and Location Metadata only | Cover Letter(s) | 2023-05-10 | PDF 119.1 KB |
| ID Label and Location Info | ID Label/Location Info | 2023-05-10 | PDF 119.1 KB |
| Block Diagram | Block Diagram | 2023-05-15 | PDF 1.5 MB |
| Operational Description 1 | Operational Description | 2023-05-15 | PDF 1.3 MB |
| Antenna Info | Test Report | 2023-05-15 | PDF 195.9 KB |
| Test Report | Test Report | 2023-05-15 | PDF 2 MB |
| Covered Equipment Attestation Statement | Attestation Statements | 2023-05-15 | PDF 811.6 KB |
| US Agent for Service of Process | Attestation Statements | 2023-05-15 | PDF 382.8 KB |
| Authorization Letter | Cover Letter(s) | 2023-05-15 | PDF 144 KB |
| PCII Letter | Cover Letter(s) | 2023-05-15 | PDF 260.4 KB |
| New Owner Letter | Cover Letter(s) | 2023-05-10 | PDF 151.4 KB |
| Old Owner Letter | Cover Letter(s) | 2023-05-10 | PDF 90.8 KB |
| RF Exposure Info | RF Exposure Info | 2023-05-15 | PDF 708.5 KB |
Application Information
| Application ID | 71MB+eYe41Ke2OeKRskSFw== |
|---|---|
| Final Action Date | 2023-05-15 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0033303900 |
| Model | IQAIR |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WiFi Module |
| Responsible Party | Karen Maxwell, Vice President, Quality and Reliability, KMaxwell@EnphaseEnergy.com , +1-925-719-7500 |
| Agent | Michelle Michelle Michelle, CKC Certification Services, LLC, TCBinfo@ckc.com  , 209-299-5240 |
| Technical Contact | Mark Seay, Enphase Energy, Inc., MSeay@EnphaseEnergy.com , 1-877-694-4794 |
| Non-Technical Contact | Bryan Young, Enphase Energy, Inc., BrYoung@EnphaseEnergy.com , 1.877.797.4749 |
| Test Firm | Steve Behm, CKC Laboratories, Inc., qa@ckc.com , 209-966-5240 |
| TCB Email | tcbinfo@ckc.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to add antenna. Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes. Approved for use with antenna(s) as listed in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 71MB+eYe41Ke2OeKRskSFw== | 2023-05-15 | Class II permissive change or modification of presently authorized equipment |
| HE8wifhogppZaXmIpV/yYw== | 2023-05-10 | Change in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESP32WROVERE Grant Date: 04/13/2020 |
| 7yqlHvcf8wtqBb4mc39oeg== | 2023-05-10 | Change in identification of presently authorized equipment. Original FCC ID: 2AC7Z-ESP32WROVERE Grant Date: 04/13/2020 |
Equipment Authorization
Grants
TCB Grant - Application HE8wifhogppZaXmIpV/yYw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 05/10/2023 Application Dated: 05/08/2023 |
| Enphase Energy, Inc. |
| 47281 Bayside Parkway |
| Fremont, CA 94538 |
| Attention: Karen Maxwell , Vice President, Quality and Reliability |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A93H-IQAIR |
| Name of Grantee: | Enphase Energy, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 |
| Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. |
EAS Grant - Application HE8wifhogppZaXmIpV/yYw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Enphase Energy, Inc. 47281 Bayside Parkway Fremont, CA 94538 United States |
Date of Grant: 05/10/2023 Application Dated: 05/08/2023 |
| Attention: Karen Maxwell , Vice President, Quality and Reliability |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A93H-IQAIR |
| Name of Grantee: | Enphase Energy, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.007 |
| Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 05/10/2023 Application Dated: 05/08/2023 |
| Enphase Energy, Inc. |
| 47281 Bayside Parkway |
| Fremont, CA 94538 |
| Attention: Karen Maxwell , Vice President, Quality and Reliability |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A93H-IQAIR |
| Name of Grantee: | Enphase Energy, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 | |||
| 15C | 2412.0 - 2462.0 | 0.459 |
| Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes. |
EAS Grant - Application 7yqlHvcf8wtqBb4mc39oeg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Enphase Energy, Inc. 47281 Bayside Parkway Fremont, CA 94538 United States |
Date of Grant: 05/10/2023 Application Dated: 05/08/2023 |
| Attention: Karen Maxwell , Vice President, Quality and Reliability |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A93H-IQAIR |
| Name of Grantee: | Enphase Energy, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 | |||
| 15C | 2412.0 - 2462.0 | 0.459 |
| Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 05/15/2023 Application Dated: 05/10/2023 |
| Enphase Energy, Inc. |
| 47281 Bayside Parkway |
| Fremont, CA 94538 |
| Attention: Karen Maxwell , Vice President, Quality and Reliability |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A93H-IQAIR |
| Name of Grantee: | Enphase Energy, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 | |||
| 15C | 2412.0 - 2462.0 | 0.459 |
| C2PC to add antenna. Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes. Approved for use with antenna(s) as listed in this filing. |
EAS Grant - Application 71MB+eYe41Ke2OeKRskSFw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Enphase Energy, Inc. 47281 Bayside Parkway Fremont, CA 94538 United States |
Date of Grant: 05/15/2023 Application Dated: 05/10/2023 |
| Attention: Karen Maxwell , Vice President, Quality and Reliability |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A93H-IQAIR |
| Name of Grantee: | Enphase Energy, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 | |||
| 15C | 2412.0 - 2462.0 | 0.459 |
| C2PC to add antenna. Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes. Approved for use with antenna(s) as listed in this filing. |
| Mail To: |