FCC ID 2A93L-SEMS

The Inergy Systems Smart Energy Management System (SEMS) is a home automation system that focuses on energy management and control

by Inergy Systems LLC

Grantee Code: 2A93L   Product Code: SEMS
Latest application date: 2023-03-13

FCC ID Device Details

FCC ID2A93L-SEMS
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A93L
Product CodeSEMS
Applicant BusinessInergy Systems LLC 🇺🇸
Related Domains inergysystems.com
Equipment ClassThe Inergy Systems Smart Energy Management System (SEMS) is a home automation system that focuses on energy management and control
Test FirmH.B. Compliance Solutions

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2023-03-13
908.4-920 MHzOriginal Equipment2023-03-13

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-09-06PDF 619.3 KB
Internal PhotosInternal Photos2023-09-06PDF 552.3 KB
External PhotosExternal Photos2023-09-06PDF 281 KB
LabelID Label/Location Info2023-03-13PDF 266.4 KB
Test Setup PhotosTest Setup Photos2023-09-06PDF 428.9 KB
AntennaTest Report2023-03-13PDF 1.7 MB
Test ReportTest Report2023-03-13PDF 5.4 MB
2.911(d)(7) Agent of ServiceAttestation Statements2023-03-13PDF 229.3 KB
AttestationAttestation Statements2023-03-13PDF 217.9 KB
Covered Products AttestationAttestation Statements2023-03-13PDF 18 KB
ConfidentialityCover Letter(s)2023-03-13PDF 217.4 KB
Letter of AgencyCover Letter(s)2023-03-13PDF 114.2 KB
RF ExposureRF Exposure Info2023-03-13PDF 1.2 MB
Block Diagram Metadata onlyBlock DiagramPDF 144.9 KB
Schematics Metadata onlySchematicsPDF 664.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 1.2 MB

Application Information

Application IDjmFspbHKNBSfW5cCsowmEQ==
Final Action Date2023-03-13
Application PurposeOriginal Equipment
Applicant FRN0033310517
ModelSEMS
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionThe Inergy Systems Smart Energy Management System (SEMS) is a home automation system that focuses on energy management and control
Responsible PartyDavid Weston, dweston@inergysystems.com , 4803102750
AgentHoosamuddin Hoosamuddin Hoosamuddin, H.B. Compliance Solutions, hoosam@hbcompliance.com
Test FirmHoosamuddin Bandukwala, H.B. Compliance Solutions, hoosam@hbcompliance.com , 480-684-2969
TCB Emailevan.gould@tuvsud.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date09/06/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
jmFspbHKNBSfW5cCsowmEQ==2023-03-13Original Equipment
Gn8LltbxLx2A7vHVO2Ksww==2023-03-13Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
908.4-920 MHz15CCC
2412-2462 MHz0.184000015CCC

Grants

TCB Grant - Application jmFspbHKNBSfW5cCsowmEQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
Date of Grant: 03/13/2023

Application Dated: 03/10/2023
Inergy Systems LLC
2600 S Hardy Dr
Tempe, AZ 85282
 
Attention: David Weston

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A93L-SEMS
Name of Grantee:  Inergy Systems LLC
Equipment Class: Digital Transmission System
Notes: The Inergy Systems Smart Energy Management System (SEMS) is a home automation system that focuses on energy management and control
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.184  

Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application jmFspbHKNBSfW5cCsowmEQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Inergy Systems LLC
2600 S Hardy Dr
Tempe, AZ 85282
United States
  Date of Grant: 03/13/2023

Application Dated: 03/10/2023
 
Attention: David Weston

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A93L-SEMS
Name of Grantee:  Inergy Systems LLC
Equipment Class: Digital Transmission System
Notes: The Inergy Systems Smart Energy Management System (SEMS) is a home automation system that focuses on energy management and control
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.184  

Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Gn8LltbxLx2A7vHVO2Ksww==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
Date of Grant: 03/13/2023

Application Dated: 03/10/2023
Inergy Systems LLC
2600 S Hardy Dr
Tempe, AZ 85282
 
Attention: David Weston

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A93L-SEMS
Name of Grantee:  Inergy Systems LLC
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: The Inergy Systems Smart Energy Management System (SEMS) is a home automation system that focuses on energy management and control
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 908.4  -  920.0  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Gn8LltbxLx2A7vHVO2Ksww==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Inergy Systems LLC
2600 S Hardy Dr
Tempe, AZ 85282
United States
  Date of Grant: 03/13/2023

Application Dated: 03/10/2023
 
Attention: David Weston

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A93L-SEMS
Name of Grantee:  Inergy Systems LLC
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: The Inergy Systems Smart Energy Management System (SEMS) is a home automation system that focuses on energy management and control
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 908.4  -  920.0  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: