FCC ID 2A98RDJZCGWA
Host-based automotive module with Wi-Fi
by Nuro, Inc.
Grantee Code: 2A98R Product Code: DJZCGWA
Latest application date: 2023-08-23
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-08-23 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2023-08-23 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: XPYJODYW374 Grant Date: 12/02/2022 | 2023-07-24 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: XPYJODYW374 Grant Date: 12/02/2022 | 2023-07-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2023-08-23 | PDF 215.8 KB |
| Manual | Users Manual | 2023-07-24 | PDF 51.8 KB |
| External Photos | External Photos | 2023-07-24 | PDF 102.5 KB |
| Label | ID Label/Location Info | 2023-08-23 | PDF 304.1 KB |
| Label | ID Label/Location Info | 2023-07-24 | PDF 86.5 KB |
| Test setup photos | Test Setup Photos | 2023-08-23 | PDF 809.7 KB |
| Test Report | Test Report | 2023-08-23 | PDF 1.9 MB |
| Test Report | Test Report | 2023-08-23 | PDF 1.1 MB |
| antenna information | Test Report | 2023-08-23 | PDF 3.6 MB |
| Attestation | Attestation Statements | 2023-08-23 | PDF 468.9 KB |
| Attestation letter 2.911(D)(5) | Attestation Statements | 2023-08-23 | PDF 54.9 KB |
| Attestation letter 2.911(D)(7) | Attestation Statements | 2023-08-23 | PDF 73 KB |
| Attestation letter 2.911(D)(5) | Attestation Statements | 2023-07-24 | PDF 55.1 KB |
| C2PC letter | Cover Letter(s) | 2023-08-23 | PDF 333.3 KB |
| cover letter | Cover Letter(s) | 2023-08-23 | PDF 333.3 KB |
| cover letter | Cover Letter(s) | 2023-07-24 | PDF 66.2 KB |
| RF Exposure report | RF Exposure Info | 2023-08-23 | PDF 550.7 KB |
Application Information
| Application ID | rEhNE/biG6v8zCQm9wJ/sQ== |
|---|---|
| Final Action Date | 2023-08-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0031250137 |
| Model | DJZCGWA |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Host-based automotive module with Wi-Fi |
| Responsible Party | James Owens, regulatory@nuro.ai  , 5712744899 |
| Test Firm | Meinolf Glunz, CETECOM Inc., meinolf.glunz@cetecom.com  , 408-586-6301 |
| TCB Email | jeff.klinger@cetecom.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power Output listed is conducted. C2PC to add additional antenna and multi-transmitter assessment as described in the filling. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device as described in this filling, or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports 2.4GHz WLAN/BLE features and has 20 MHz and 40 MHz bandwidth modes for WLAN; and it contains 5GHz WLAN transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rEhNE/biG6v8zCQm9wJ/sQ== | 2023-08-23 | Class II permissive change or modification of presently authorized equipment |
| lvGPu2PE4poeo8L7ktEEMw== | 2023-08-23 | Class II permissive change or modification of presently authorized equipment |
| 4r6KqbT4gNvFWjMJGwdGrg== | 2023-07-24 | Change in identification of presently authorized equipment. Original FCC ID: XPYJODYW374 Grant Date: 12/02/2022 |
| 2et9Yg/kCv1ojCsI8uvQBA== | 2023-07-24 | Change in identification of presently authorized equipment. Original FCC ID: XPYJODYW374 Grant Date: 12/02/2022 |
Equipment Authorization
Grants
TCB Grant - Application rEhNE/biG6v8zCQm9wJ/sQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 08/23/2023 Application Dated: 08/23/2023 |
| Nuro, Inc. |
| 1300 Terra Bella Avenue |
| Suite 100 |
| Mountain View, CA 94043 |
| Attention: James Owens |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A98RDJZCGWA |
| Name of Grantee: | Nuro, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Host-based automotive module with Wi-Fi |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0132 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.1349 |
| Single Modular Approval. Power Output listed is conducted. C2PC to add additional antenna and multi-transmitter assessment as described in the filling. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device as described in this filling, or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports 2.4GHz WLAN/BLE features and has 20 MHz and 40 MHz bandwidth modes for WLAN; and it contains 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application rEhNE/biG6v8zCQm9wJ/sQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nuro, Inc. 1300 Terra Bella Avenue Suite 100 Mountain View, CA 94043 United States |
Date of Grant: 08/23/2023 Application Dated: 08/23/2023 |
| Attention: James Owens |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A98RDJZCGWA |
| Name of Grantee: | Nuro, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Host-based automotive module with Wi-Fi |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0132 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.1349 |
| Single Modular Approval. Power Output listed is conducted. C2PC to add additional antenna and multi-transmitter assessment as described in the filling. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device as described in this filling, or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports 2.4GHz WLAN/BLE features and has 20 MHz and 40 MHz bandwidth modes for WLAN; and it contains 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 08/23/2023 Application Dated: 08/23/2023 |
| Nuro, Inc. |
| 1300 Terra Bella Avenue |
| Suite 100 |
| Mountain View, CA 94043 |
| Attention: James Owens |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A98RDJZCGWA |
| Name of Grantee: | Nuro, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Host-based automotive module with Wi-Fi |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0776 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0912 |
| Single Modular Approval. Power Output listed is conducted. C2PC to add additional antenna, reduce bands and multi-transmitter assessment as described in the filling. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device as described in this filling, or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4GHz WLAN/BLE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application lvGPu2PE4poeo8L7ktEEMw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nuro, Inc. 1300 Terra Bella Avenue Suite 100 Mountain View, CA 94043 United States |
Date of Grant: 08/23/2023 Application Dated: 08/23/2023 |
| Attention: James Owens |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A98RDJZCGWA |
| Name of Grantee: | Nuro, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Host-based automotive module with Wi-Fi |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0776 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0912 |
| Single Modular Approval. Power Output listed is conducted. C2PC to add additional antenna, reduce bands and multi-transmitter assessment as described in the filling. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device as described in this filling, or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4GHz WLAN/BLE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 07/24/2023 Application Dated: 07/24/2023 |
| Nuro, Inc. |
| 1300 Terra Bella Avenue |
| Suite 100 |
| Mountain View, CA 94043 |
| Attention: James Owens |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A98RDJZCGWA |
| Name of Grantee: | Nuro, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | module with Wi-Fi and Bluetooth |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0776 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1096 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.1148 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0912 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4GHz WLAN/BT/BLE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 4r6KqbT4gNvFWjMJGwdGrg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nuro, Inc. 1300 Terra Bella Avenue Suite 100 Mountain View, CA 94043 United States |
Date of Grant: 07/24/2023 Application Dated: 07/24/2023 |
| Attention: James Owens |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A98RDJZCGWA |
| Name of Grantee: | Nuro, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | module with Wi-Fi and Bluetooth |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0776 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1096 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.1148 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0912 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes and it contains 2.4GHz WLAN/BT/BLE transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 07/24/2023 Application Dated: 07/24/2023 |
| Nuro, Inc. |
| 1300 Terra Bella Avenue |
| Suite 100 |
| Mountain View, CA 94043 |
| Attention: James Owens |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A98RDJZCGWA |
| Name of Grantee: | Nuro, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | module with Wi-Fi and Bluetooth |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0132 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.1349 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports 2.4GHz WLAN/BT/BLE features and has 20 MHz and 40 MHz bandwidth modes for WLAN; and it contains 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 2et9Yg/kCv1ojCsI8uvQBA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nuro, Inc. 1300 Terra Bella Avenue Suite 100 Mountain View, CA 94043 United States |
Date of Grant: 07/24/2023 Application Dated: 07/24/2023 |
| Attention: James Owens |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2A98RDJZCGWA |
| Name of Grantee: | Nuro, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | module with Wi-Fi and Bluetooth |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0132 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.1349 |
| Single Modular Approval. Power Output listed is conducted. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This module is approved in mobile configuration. Only those antenna(s) tested with the device (Part Numbers: 2195630-1, 001-0009 and 001-0012, manufactured by TE Connectivity) or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports 2.4GHz WLAN/BT/BLE features and has 20 MHz and 40 MHz bandwidth modes for WLAN; and it contains 5GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |