FCC ID 2AA93-1316
Bluetooth Module
by Eroad, Ltd.
Grantee Code: 2AA93 Product Code: 1316
Latest application date: 2019-02-25
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-02-25 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-02-25 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: T7V1316 Grant Date: 04/19/2013 | 2019-02-19 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: T7V1316 Grant Date: 04/19/2013 | 2019-02-19 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual Install Guide | Users Manual | 2019-08-24 | PDF 3.1 MB |
| Internal Photos Part 1 | Internal Photos | 2019-08-24 | PDF 5.6 MB |
| Internal Photos Part 2 | Internal Photos | 2019-08-24 | PDF 4.7 MB |
| Internal Photos Part 1 | Internal Photos | 2019-02-19 | PDF 5.2 MB |
| Internal Photos Part 2 | Internal Photos | 2019-02-19 | PDF 5.6 MB |
| External Photos | External Photos | 2019-08-24 | PDF 1.8 MB |
| External Photos | External Photos | 2019-02-19 | PDF 126.1 KB |
| E-Label and Step | ID Label/Location Info | 2019-02-25 | PDF 85.4 KB |
| Label | ID Label/Location Info | 2019-02-19 | PDF 23.2 KB |
| Label Location | ID Label/Location Info | 2019-02-19 | PDF 28.2 KB |
| Test Setup Photos DSS | Test Setup Photos | 2019-08-24 | PDF 207 KB |
| Test Setup Photos DTS | Test Setup Photos | 2019-08-24 | PDF 208.3 KB |
| Test Report DSS | Test Report | 2019-02-25 | PDF 5.5 MB |
| Test Report DTS | Test Report | 2019-02-25 | PDF 2.5 MB |
| Class II Permissive Change | Cover Letter(s) | 2019-02-25 | PDF 1.3 MB |
| Confidentiality Request Letter Long Term | Cover Letter(s) | 2019-02-25 | PDF 1.2 MB |
| Confidentiality Request Letter Short Term | Cover Letter(s) | 2019-02-25 | PDF 1.3 MB |
| POA | Cover Letter(s) | 2019-02-25 | PDF 1.6 MB |
| Application Letter Applicant | Cover Letter(s) | 2019-02-19 | PDF 1.7 MB |
| Change in ID Approval Letter | Cover Letter(s) | 2019-02-19 | PDF 298.5 KB |
| POA | Cover Letter(s) | 2019-02-19 | PDF 1.6 MB |
| RF Exposure | RF Exposure Info | 2019-02-25 | PDF 719 KB |
| Tune Up Procedure Metadata only | Parts List/Tune Up Info | PDF 227.1 KB |
Application Information
| Application ID | gXstCQOmbF5jxbrLMNhEfQ== |
|---|---|
| Final Action Date | 2019-02-25 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0021896220 |
| Model | 1316 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth Module |
| Responsible Party | Jarred Clayton, jarred.clayton@eroad.com |
| Test Firm | Jim Tsai, Sporton International (Kunshan) Inc., JimTsai@sporton.com.tw |
| TCB Email | TEI@TIMCOENGR.COM |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/24/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 6 mm from all persons. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. CLASS II PERMISSIVE CHANGE: Limited to “EROAD electronic distance recorder, Model: Ehubo2.2”. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| gXstCQOmbF5jxbrLMNhEfQ== | 2019-02-25 | Class II permissive change or modification of presently authorized equipment |
| Nb/lnuKSsWgvst/y8hPf2w== | 2019-02-25 | Class II permissive change or modification of presently authorized equipment |
| tTthvjK3cFVB0KqJpspsyw== | 2019-02-19 | Change in identification of presently authorized equipment. Original FCC ID: T7V1316 Grant Date: 04/19/2013 |
| sW3hPcyjd2A2zmaKnBE4pg== | 2019-02-19 | Change in identification of presently authorized equipment. Original FCC ID: T7V1316 Grant Date: 04/19/2013 |
Grants
TCB Grant - Application tTthvjK3cFVB0KqJpspsyw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/19/2019 Application Dated: 02/18/2019 |
| Eroad, Ltd. |
| Level 3, 260 Oteha Valley Road |
| AlbanyP.O. Box 305 394, |
| Auckland, 0757 New Zealand |
| Attention: Jarred Clayton |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AA93-1316 |
| Name of Grantee: | Eroad, Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.013 |
| Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 6 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application tTthvjK3cFVB0KqJpspsyw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Eroad, Ltd. Level 3, 260 Oteha Valley Road AlbanyP.O. Box 305 394, Auckland, 0757 New Zealand |
Date of Grant: 02/19/2019 Application Dated: 02/18/2019 |
| Attention: Jarred Clayton |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AA93-1316 |
| Name of Grantee: | Eroad, Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.013 |
| Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 6 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/19/2019 Application Dated: 02/18/2019 |
| Eroad, Ltd. |
| Level 3, 260 Oteha Valley Road |
| AlbanyP.O. Box 305 394, |
| Auckland, 0757 New Zealand |
| Attention: Jarred Clayton |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AA93-1316 |
| Name of Grantee: | Eroad, Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.014 |
| Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 6 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application sW3hPcyjd2A2zmaKnBE4pg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Eroad, Ltd. Level 3, 260 Oteha Valley Road AlbanyP.O. Box 305 394, Auckland, 0757 New Zealand |
Date of Grant: 02/19/2019 Application Dated: 02/18/2019 |
| Attention: Jarred Clayton |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AA93-1316 |
| Name of Grantee: | Eroad, Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.014 |
| Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 6 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/25/2019 Application Dated: 02/22/2019 |
| Eroad, Ltd. |
| Level 3, 260 Oteha Valley Road |
| AlbanyP.O. Box 305 394, |
| Auckland, 0757 New Zealand |
| Attention: Jarred Clayton |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AA93-1316 |
| Name of Grantee: | Eroad, Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.014 |
| Limited Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 6 mm from all persons. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. CLASS II PERMISSIVE CHANGE: Limited to EROAD electronic distance recorder, Model: Ehubo2.2". |
EAS Grant - Application Nb/lnuKSsWgvst/y8hPf2w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Eroad, Ltd. Level 3, 260 Oteha Valley Road AlbanyP.O. Box 305 394, Auckland, 0757 New Zealand |
Date of Grant: 02/25/2019 Application Dated: 02/22/2019 |
| Attention: Jarred Clayton |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AA93-1316 |
| Name of Grantee: | Eroad, Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.014 |
| Limited Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 6 mm from all persons. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. CLASS II PERMISSIVE CHANGE: Limited to EROAD electronic distance recorder, Model: Ehubo2.2". |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/25/2019 Application Dated: 02/22/2019 |
| Eroad, Ltd. |
| Level 3, 260 Oteha Valley Road |
| AlbanyP.O. Box 305 394, |
| Auckland, 0757 New Zealand |
| Attention: Jarred Clayton |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AA93-1316 |
| Name of Grantee: | Eroad, Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.013 |
| Limited Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 6 mm from all persons. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. CLASS II PERMISSIVE CHANGE: Limited to EROAD electronic distance recorder, Model: Ehubo2.2. |
EAS Grant - Application gXstCQOmbF5jxbrLMNhEfQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Eroad, Ltd. Level 3, 260 Oteha Valley Road AlbanyP.O. Box 305 394, Auckland, 0757 New Zealand |
Date of Grant: 02/25/2019 Application Dated: 02/22/2019 |
| Attention: Jarred Clayton |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AA93-1316 |
| Name of Grantee: | Eroad, Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.013 |
| Limited Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 6 mm from all persons. Installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. CLASS II PERMISSIVE CHANGE: Limited to EROAD electronic distance recorder, Model: Ehubo2.2. |
| Mail To: |