FCC ID 2AAA9-R2CAPND900N
Wireless Router
by Relay2, Inc.
Grantee Code: 2AAA9 Product Code: R2CAPND900N
Latest application date: 2013-11-25
FCC ID Device Details
| FCC ID | 2AAA9-R2CAPND900N |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AAA9 |
| Product Code | R2CAPND900N |
| Applicant Business | Relay2, Inc. 🇺🇸 |
| Related Domains | |
| Equipment Class | Wireless Router |
| Test Firm | SIEMIC (Shenzhen-China) Laboratories |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2013-11-25 |
| 5180-5240 MHz | Original Equipment | 2013-11-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2013-11-25 | PDF 2.2 MB |
| internal photo | Internal Photos | 2013-11-25 | PDF 1.8 MB |
| external photo | External Photos | 2013-11-25 | PDF 415.7 KB |
| Label | ID Label/Location Info | 2013-11-25 | PDF 38.9 KB |
| Label Location | ID Label/Location Info | 2013-11-25 | PDF 109.2 KB |
| setup photo | Test Setup Photos | 2013-11-25 | PDF 365.8 KB |
| setup photo | Test Setup Photos | 2013-11-25 | PDF 281.5 KB |
| EMC Report | Test Report | 2013-11-25 | PDF 2.7 MB |
| RF report | Test Report | 2013-11-25 | PDF 4.3 MB |
| RF report | Test Report | 2013-11-25 | PDF 3.5 MB |
| Confidentiality Request Letter | Cover Letter(s) | 2013-11-25 | PDF 25.2 KB |
| POA | Cover Letter(s) | 2013-11-25 | PDF 147.1 KB |
| RF exposure | RF Exposure Info | 2013-11-25 | PDF 139 KB |
Application Information
| Application ID | Xr5Jl3q9RO0YBDIsxyn3yw== |
|---|---|
| Final Action Date | 2013-11-25 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0022615454 |
| Model | -R2CAPND900N |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless Router |
| Responsible Party | Joseph Lin, Sr. Hardware PM Director, joseph.lin@relay2.com |
| Test Firm | Leslie Bai, SIEMIC (Shenzhen-China) Laboratories, leslie.bai@siemic.com |
| TCB Email | tcb@siemic.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is the maximum conducted output power. device contains both 20 & 40 MHz The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Xr5Jl3q9RO0YBDIsxyn3yw== | 2013-11-25 | Original Equipment |
| E0XPj2mp2nfTNKBvfXs4QQ== | 2013-11-25 | Original Equipment |
| 4JNLH9MEcb/Wp9c+Gw8PwQ== | 2013-11-25 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Xr5Jl3q9RO0YBDIsxyn3yw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 11/25/2013 Application Dated: 11/25/2013 |
| Relay2, Inc. |
| 1525 McCarthy Blvd. Suite 209 |
| Milpitas, CA 95035 |
| Attention: Joseph Lin , Sr. Hardware PM Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAA9-R2CAPND900N |
| Name of Grantee: | Relay2, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Router |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.4742 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.4753 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.542 | ||
| CC | 15C | 5755.0 - 5795.0 | 0.5188 |
| Power listed is the maximum conducted output power. device contains both 20 & 40 MHz The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Xr5Jl3q9RO0YBDIsxyn3yw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Relay2, Inc. 1525 McCarthy Blvd. Suite 209 Milpitas, CA 95035 United States |
Date of Grant: 11/25/2013 Application Dated: 11/25/2013 |
| Attention: Joseph Lin , Sr. Hardware PM Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAA9-R2CAPND900N |
| Name of Grantee: | Relay2, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless Router |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.4742 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.4753 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.542 | ||
| CC | 15C | 5755.0 - 5795.0 | 0.5188 |
| Power listed is the maximum conducted output power. device contains both 20 & 40 MHz The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 11/25/2013 Application Dated: 11/25/2013 |
| Relay2, Inc. |
| 1525 McCarthy Blvd. Suite 209 |
| Milpitas, CA 95035 |
| Attention: Joseph Lin , Sr. Hardware PM Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAA9-R2CAPND900N |
| Name of Grantee: | Relay2, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Router |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0281 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0259 |
| Power listed is the maximum conducted output power. device contains both 20 & 40 MHz This transmitter is restricted to indoor use in the 5180MHz to 5240MHz frequency range. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application E0XPj2mp2nfTNKBvfXs4QQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Relay2, Inc. 1525 McCarthy Blvd. Suite 209 Milpitas, CA 95035 United States |
Date of Grant: 11/25/2013 Application Dated: 11/25/2013 |
| Attention: Joseph Lin , Sr. Hardware PM Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAA9-R2CAPND900N |
| Name of Grantee: | Relay2, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless Router |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0281 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0259 |
| Power listed is the maximum conducted output power. device contains both 20 & 40 MHz This transmitter is restricted to indoor use in the 5180MHz to 5240MHz frequency range. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 11/25/2013 Application Dated: 11/25/2013 |
| Relay2, Inc. |
| 1525 McCarthy Blvd. Suite 209 |
| Milpitas, CA 95035 |
| Attention: Joseph Lin , Sr. Hardware PM Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAA9-R2CAPND900N |
| Name of Grantee: | Relay2, Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wireless Router |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 4JNLH9MEcb/Wp9c+Gw8PwQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Relay2, Inc. 1525 McCarthy Blvd. Suite 209 Milpitas, CA 95035 United States |
Date of Grant: 11/25/2013 Application Dated: 11/25/2013 |
| Attention: Joseph Lin , Sr. Hardware PM Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAA9-R2CAPND900N |
| Name of Grantee: | Relay2, Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Wireless Router |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |