FCC ID 2AAAS-BB02

Vivint Air Tower

by Vivint LLC

Grantee Code: 2AAAS   Product Code: BB02
Latest application date: 2025-07-30

FCC ID Device Details

FCC ID2AAAS-BB02
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AAAS
Product CodeBB02
Applicant BusinessVivint LLC 🇺🇸
Related Domains vivint.com
Equipment ClassVivint Air Tower
Test FirmBureau Veritas CPS(H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2025-07-30
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2025-07-30
2402-2480 MHzOriginal Equipment2022-07-21
2402-2480 MHzOriginal Equipment2022-07-21
5180-5240 MHzOriginal Equipment2022-07-21

Exhibits

DocumentTypeAvailableFile
Users Manual_revUsers Manual2022-10-19PDF 492.1 KB
Internal Photos revInternal Photos2025-07-30PDF 3.7 MB
Internal photos revInternal Photos2022-10-19PDF 4.7 MB
External PhotosExternal Photos2025-07-30PDF 2.8 MB
External photosExternal Photos2022-10-19PDF 1,016.9 KB
Label LocationID Label/Location Info2022-07-21PDF 49.6 KB
Label SampleID Label/Location Info2022-07-21PDF 1 MB
Test Set Up PhotosTest Setup Photos2025-07-30PDF 2.7 MB
Test setup photosTest Setup Photos2022-10-19PDF 555.8 KB
Test setup photos (DFS-Client)Test Setup Photos2022-10-19PDF 196.1 KB
Test setup photos (DFS-Master)Test Setup Photos2022-10-19PDF 202.1 KB
Antenna Test ReportTest Report2025-07-30PDF 1.1 MB
Test Report (DTS-WLAN)Test Report2025-07-30PDF 1.5 MB
Test Report (NII)Test Report2025-07-30PDF 2.1 MB
Test Report (DFS-Client)-1 revTest Report2022-07-21PDF 2.3 MB
Test Report (DFS-Master)-1 revTest Report2022-07-21PDF 2.4 MB
Test Report (DFS-Master)-2 revTest Report2022-07-21PDF 1.4 MB
Test Report (DFS-Master)-3 revTest Report2022-07-21PDF 1.3 MB
Test Report (DFS-Master)-4 revTest Report2022-07-21PDF 1.3 MB
Test Report (DFS-Master)-5 revTest Report2022-07-21PDF 952.1 KB
Test Report (DTS-BTLE)Test Report2022-07-21PDF 1.5 MB
Test Report (DTS-WLAN) rev2Test Report2022-07-21PDF 2.6 MB
Test Report (NII) rev2Test Report2022-07-21PDF 4.8 MB
Test report (DFS-Client)-2Test Report2022-07-21PDF 1.4 MB
Test report (DFS-Client)-3Test Report2022-07-21PDF 1.2 MB
Test report (DFS-Client)-4Test Report2022-07-21PDF 1.2 MB
Test report (DFS-Client)-5Test Report2022-07-21PDF 813.7 KB
Test report (DSS-BTEDR)Test Report2022-07-21PDF 1.7 MB
Test report (DTS-WLAN) rev Metadata onlyTest Report2022-07-21PDF 2.6 MB
Test report (NII) rev Metadata onlyTest Report2022-07-21PDF 4.8 MB
Test report (co-located)Test Report2022-07-21PDF 1.1 MB
Attestation (Statements of part 2.911(d)(5))Attestation Statements2025-07-30PDF 89.3 KB
Attestation (U.S. local Agent Letter)Attestation Statements2025-07-30PDF 86 KB
Attestation (Channel and Mode Declaration)Attestation Statements2022-07-21PDF 85.8 KB
Attestation (DFS Client + Master Declaration) revAttestation Statements2022-07-21PDF 214 KB
Confidentiality Request (Long term)Cover Letter(s)2025-07-30PDF 99.2 KB
Cover Letter (Agent Authorization)Cover Letter(s)2025-07-30PDF 126.4 KB
Cover Letter (Description of Change)Cover Letter(s)2025-07-30PDF 141.7 KB
Confidentiality Request (Long term)Cover Letter(s)2022-07-21PDF 105.6 KB
Confidentiality request (Long term)Cover Letter(s)2022-07-21PDF 105.6 KB
Confidentiality request (Short term)Cover Letter(s)2022-07-21PDF 105.1 KB
Cover Letter (Agent Authorization)Cover Letter(s)2022-07-21PDF 108.2 KB
RF Exposure Info (MPE)RF Exposure Info2025-07-30PDF 549.6 KB
RF Exposure Info (MPE) Metadata onlyRF Exposure Info2022-07-21PDF 506.7 KB
RF Exposure Info (MPE) revRF Exposure Info2022-07-21PDF 506.2 KB
RF exposure info (MPE) Metadata onlyRF Exposure Info2022-07-21PDF 506.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 83.2 KB
Block diagram rev Metadata onlyBlock DiagramPDF 52.7 KB
Schematics Metadata onlySchematicsPDF 1.3 MB
Schematics Metadata onlySchematicsPDF 876.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 459.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 262.4 KB
Software Operational Description rev Metadata onlyOperational DescriptionPDF 192 KB

Application Information

Application IDkh4QYRg1k2WmJv2Q7mj/sA==
Final Action Date2025-07-30
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0022442263
ModelBB02
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionVivint Air Tower
Responsible PartyNorman Hansen, Regulatory Compliance Engineer, norman.hansen@vivint.com , 307-679-3588
AgentTilly Tilly Tilly, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, tilly.pan@bureauveritas.com , 88633183232
Test FirmLiu Ken, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, ken.liu@bureauveritas.com , +886-3-2600609
TCB Emailcertification@nacsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC for the modification / substitution of passive components as described in this filing. Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. The product must be installed such that its antenna(s) can provide a separation distance of at least 27 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
kh4QYRg1k2WmJv2Q7mj/sA==2025-07-30Class II permissive change or modification of presently authorized equipment
ayJl0x/ThPQOSNOfCzPaqQ==2025-07-30Class II permissive change or modification of presently authorized equipment
q44ExsIbmrW1qcJ9DfniZQ==2022-07-21Original Equipment
kzw2KWw2dEYRXpggiUFAIw==2022-07-21Original Equipment
8JFuuMGfWv3pttImDCvZkw==2022-07-21Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00815CCC
2402-2480 MHz0.014000015CCC
2402-2480 MHz0.008CC
2412-2462 MHz0.9415CCC, MO
2412-2462 MHz0.94CC, MO
5180-5240 MHz0.69115ECC, MO
5180-5240 MHz0.691CC, MO
5260-5320 MHz0.24915ECC, MO, ND
5260-5320 MHz0.249CC, MO, ND
5500-5720 MHz0.23615ECC, MO, ND
5500-5720 MHz0.236CC, MO, ND
5745-5825 MHz0.77915ECC, MO
5745-5825 MHz0.779CC, MO

Grants

TCB Grant - Application q44ExsIbmrW1qcJ9DfniZQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  North American EMC Certification Services Inc
24889 Ferguson Ave
Maple Ridge, BC,
Canada
Date of Grant: 07/21/2022

Application Dated: 07/19/2022
Vivint, Inc.
4931 N. 300 W.
Provo, UT 84604
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-BB02
Name of Grantee:  Vivint, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Vivint Air Tower
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

Power listed is maximum conducted output power. The product must be installed such that its antenna(s) can provide a separation distance of at least 27 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application q44ExsIbmrW1qcJ9DfniZQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Vivint, Inc.
4931 N. 300 W.
Provo, UT 84604
United States
  Date of Grant: 07/21/2022

Application Dated: 07/19/2022
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-BB02
Name of Grantee:  Vivint, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Vivint Air Tower
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

Power listed is maximum conducted output power. The product must be installed such that its antenna(s) can provide a separation distance of at least 27 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application kzw2KWw2dEYRXpggiUFAIw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  North American EMC Certification Services Inc
24889 Ferguson Ave
Maple Ridge, BC,
Canada
Date of Grant: 07/21/2022

Application Dated: 07/19/2022
Vivint, Inc.
4931 N. 300 W.
Provo, UT 84604
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-BB02
Name of Grantee:  Vivint, Inc.
Equipment Class: Digital Transmission System
Notes: Vivint Air Tower
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  
CC MO 15C 2412.0  -  2462.0 0.94  

Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. The product must be installed such that its antenna(s) can provide a separation distance of at least 27 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application kzw2KWw2dEYRXpggiUFAIw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Vivint, Inc.
4931 N. 300 W.
Provo, UT 84604
United States
  Date of Grant: 07/21/2022

Application Dated: 07/19/2022
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-BB02
Name of Grantee:  Vivint, Inc.
Equipment Class: Digital Transmission System
Notes: Vivint Air Tower
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  
CC MO 15C 2412.0  -  2462.0 0.94  

Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. The product must be installed such that its antenna(s) can provide a separation distance of at least 27 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application kh4QYRg1k2WmJv2Q7mj/sA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  North American EMC Certification Services Inc
24889 Ferguson Ave
Maple Ridge, BC,
Canada
Date of Grant: 07/30/2025

Application Dated: 07/30/2025
Vivint LLC
3401 N. Ashton Blvd.
Lehi, UT 84043
 
Attention: Norman Hansen , Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-BB02
Name of Grantee:  Vivint LLC
Equipment Class: Digital Transmission System
Notes: Vivint Air Tower
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  
CC MO 15C 2412.0  -  2462.0 0.94  

C2PC for the modification / substitution of passive components as described in this filing.

Power listed is maximum conducted output power. This device supports 20 and 40 MHz bandwidth modes for WLAN. The product must be installed such that its antenna(s) can provide a separation distance of at least 27 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ayJl0x/ThPQOSNOfCzPaqQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  North American EMC Certification Services Inc
24889 Ferguson Ave
Maple Ridge, BC,
Canada
Date of Grant: 07/30/2025

Application Dated: 07/30/2025
Vivint LLC
3401 N. Ashton Blvd.
Lehi, UT 84043
 
Attention: Norman Hansen , Regulatory Compliance Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-BB02
Name of Grantee:  Vivint LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Vivint Air Tower
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.691  
CC MO ND 15E 5260.0  -  5320.0 0.249  
CC MO ND 15E 5500.0  -  5720.0 0.236  
CC MO 15E 5745.0  -  5825.0 0.779  

C2PC for the modification / substitution of passive components as described in this filing.

Power listed is maximum conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 27 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 8JFuuMGfWv3pttImDCvZkw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  North American EMC Certification Services Inc
24889 Ferguson Ave
Maple Ridge, BC,
Canada
Date of Grant: 07/21/2022

Application Dated: 07/19/2022
Vivint, Inc.
4931 N. 300 W.
Provo, UT 84604
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-BB02
Name of Grantee:  Vivint, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Vivint Air Tower
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.691  
CC MO ND 15E 5260.0  -  5320.0 0.249  
CC MO ND 15E 5500.0  -  5720.0 0.236  
CC MO 15E 5745.0  -  5825.0 0.779  

Power listed is maximum conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 27 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application 8JFuuMGfWv3pttImDCvZkw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Vivint, Inc.
4931 N. 300 W.
Provo, UT 84604
United States
  Date of Grant: 07/21/2022

Application Dated: 07/19/2022
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-BB02
Name of Grantee:  Vivint, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Vivint Air Tower
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.691  
CC MO ND 15E 5260.0  -  5320.0 0.249  
CC MO ND 15E 5500.0  -  5720.0 0.236  
CC MO 15E 5745.0  -  5825.0 0.779  

Power listed is maximum conducted output power. This device supports 20, 40 and 80 MHz bandwidth modes. The product must be installed such that its antenna(s) can provide a separation distance of at least 27 cm from all persons and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Operation of this device is restricted to indoor use only.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: