FCC ID 2AAAS-NM01

2AAASNM01, 2AAAS NM01, 2AAAS-NM01, 2AAAS-NMO1, 2AAAS-NM0I, 2AAA5-NM01

Vivint. Inc. Vivint 2.4GHz/5GHz WiFi Module -NM01


An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: 2AAAS-NM01 is 2AAAS. The remaining characters of the FCC ID, -NM01, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Vivint 2.4GHz/5GHz WiFi Module

App # Purpose Date Unique ID
1 Original Equipment 2017-09-06 TRwHh1X92E4lriOYM4jAGg==
2 Original Equipment 2017-09-06 g/tgYkh5dww4AlvjgvFhUw==
3 Class II Permissive Change 2017-09-13 LIrbIaCep9raZMZ3+JbzRQ==
4 Class II Permissive Change 2017-09-13 aVP5wK1IhxeIcArf8rgjuA==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: LTE 255,Unlicensed NII-3 DOWN | LTE 46,TD Unlicensed DOWN |
Frequency RangePower OutputRule PartsGrant Notes App #
2.412-2.462 GHz 2.4 GHz WiFi553 mW15CCC, MO 1.1
2.412-2.462 GHz 2.4 GHz WiFi500 mW15CCC, MO 4.1
5.18-5.24 GHz 5 GHz WiFi99 mW15E38, CC, MO 2.1
5.18-5.24 GHz 5 GHz WiFi89 mW15E38, CC, MO 3.1
5.26-5.32 GHz 5 GHz WiFi103 mW15E38, CC, MO, ND 2.2
5.26-5.32 GHz 5 GHz WiFi92 mW15E38, CC, MO, ND 3.2
5.5-5.7 GHz 5 GHz WiFi76 mW15E38, CC, MO, ND 2.3
5.5-5.7 GHz 5 GHz WiFi69 mW15E38, CC, MO, ND 3.3
5.745-5.825 GHz 5 GHz WiFi74 mW15E38, CC, MO 2.4
5.745-5.825 GHz 5 GHz WiFi72 mW15E38, CC, MO 3.4

Exhibits

Available Exhibits

App # Document Type Submitted
Available
3 Test Report (NII).pdfTest Report
Adobe Acrobat PDF (1145 kB)
2017-09-13
2017-09-13
3 Test Report (DTS-WLAN).pdfTest Report
Adobe Acrobat PDF (653 kB)
2017-09-13
2017-09-13
3 RF Exposure Info (MPE).pdfRF Exposure Info
Adobe Acrobat PDF (265 kB)
2017-09-13
2017-09-13
3 Cover Letter (Description of Change).pdfCover Letter(s)
Adobe Acrobat PDF (331 kB)
2017-09-13
2017-09-13
3 Cover Letter (Agent Authorization).pdfCover Letter(s)
Adobe Acrobat PDF (100 kB)
2017-09-13
2017-09-13
3 Confidentiality Request (Short term).pdfCover Letter(s)
Adobe Acrobat PDF (66 kB)
2017-09-13
2017-09-13
3 Confidentiality Request (Long term).pdfCover Letter(s)
Adobe Acrobat PDF (74 kB)
2017-09-13
2017-09-13
4 RF Exposure Info (MPE).pdfRF Exposure Info
Adobe Acrobat PDF (265 kB)
2017-09-13
2017-09-13
4 Test Report (NII).pdfTest Report
Adobe Acrobat PDF (1145 kB)
2017-09-13
2017-09-13
4 Test Report (DTS-WLAN).pdfTest Report
Adobe Acrobat PDF (653 kB)
2017-09-13
2017-09-13
4 Confidentiality Request (Short term).pdfCover Letter(s)
Adobe Acrobat PDF (66 kB)
2017-09-13
2017-09-13
4 Confidentiality Request (Long term).pdfCover Letter(s)
Adobe Acrobat PDF (74 kB)
2017-09-13
2017-09-13
4 Cover Letter (Description of Change).pdfCover Letter(s)
Adobe Acrobat PDF (331 kB)
2017-09-13
2017-09-13
4 Cover Letter (Agent Authorization).pdfCover Letter(s)
Adobe Acrobat PDF (100 kB)
2017-09-13
2017-09-13
2 RF Exposure Information (MPE).pdfRF Exposure Info
Adobe Acrobat PDF (251 kB)
2017-09-06
2017-09-06
2 Test Report (NII).pdfTest Report
Adobe Acrobat PDF (2030 kB)
2017-09-06
2017-09-06
2 Test Report (DTS).pdfTest Report
Adobe Acrobat PDF (1437 kB)
2017-09-06
2017-09-06
2 Test Report (DFS).pdfTest Report
Adobe Acrobat PDF (945 kB)
2017-09-06
2017-09-06
2 Test Report (Co-Location).pdfTest Report
Adobe Acrobat PDF (541 kB)
2017-09-06
2017-09-06
2 Label Sample & Label Location_rev.pdfID Label/Location Info
Adobe Acrobat PDF (81 kB)
2017-09-06
2017-09-06
2 Cover Letter - Confidentiality Request - Short Term.pdfCover Letter(s)
Adobe Acrobat PDF (98 kB)
2017-09-06
2017-09-06
2 Cover Letter - Confidentiality Request - Long Term.pdfCover Letter(s)
Adobe Acrobat PDF (99 kB)
2017-09-06
2017-09-06
2 Modular Approval Request.pdfCover Letter(s)
Adobe Acrobat PDF (107 kB)
2017-09-06
2017-09-06
2 Cover Letter - Agent Authorization.pdfCover Letter(s)
Adobe Acrobat PDF (99 kB)
2017-09-06
2017-09-06
2 Attestation (DFS Client Declaration)_rev2.pdfAttestation Statements
Adobe Acrobat PDF (153 kB)
2017-09-06
2017-09-06
2 Attestation - Channel and Mode Declaration.pdfAttestation Statements
Adobe Acrobat PDF (96 kB)
2017-09-06
2017-09-06
1 RF Exposure Information (MPE).pdfRF Exposure Info
Adobe Acrobat PDF (251 kB)
2017-09-06
2017-09-06
1 Test Report (NII).pdfTest Report
Adobe Acrobat PDF (2030 kB)
2017-09-06
2017-09-06
1 Test Report (DTS).pdfTest Report
Adobe Acrobat PDF (1437 kB)
2017-09-06
2017-09-06
1 Test Report (DFS).pdfTest Report
Adobe Acrobat PDF (945 kB)
2017-09-06
2017-09-06
1 Test Report (Co-Location).pdfTest Report
Adobe Acrobat PDF (541 kB)
2017-09-06
2017-09-06
1 Label Sample & Label Location_rev.pdfID Label/Location Info
Adobe Acrobat PDF (81 kB)
2017-09-06
2017-09-06
1 Cover Letter - Confidentiality Request - Short Term.pdfCover Letter(s)
Adobe Acrobat PDF (98 kB)
2017-09-06
2017-09-06
1 Cover Letter - Confidentiality Request - Long Term.pdfCover Letter(s)
Adobe Acrobat PDF (99 kB)
2017-09-06
2017-09-06
1 Modular Approval Request.pdfCover Letter(s)
Adobe Acrobat PDF (107 kB)
2017-09-06
2017-09-06
1 Cover Letter - Agent Authorization.pdfCover Letter(s)
Adobe Acrobat PDF (99 kB)
2017-09-06
2017-09-06
1 Attestation (DFS Client Declaration)_rev2.pdfAttestation Statements
Adobe Acrobat PDF (153 kB)
2017-09-06
2017-09-06
1 Attestation - Channel and Mode Declaration.pdfAttestation Statements
Adobe Acrobat PDF (96 kB)
2017-09-06
2017-09-06

APP # 3 (2017-09-13)

App # Document Type Submitted
Available
3 Test Report (NII).pdf Test Report
Adobe Acrobat PDF (1145 kB)
2017-09-13 00:00:00
2017-09-13 00:00:00
3 Test Report (DTS-WLAN).pdf Test Report
Adobe Acrobat PDF (653 kB)
2017-09-13 00:00:00
2017-09-13 00:00:00
3 RF Exposure Info (MPE).pdf RF Exposure Info
Adobe Acrobat PDF (265 kB)
2017-09-13 00:00:00
2017-09-13 00:00:00
3 Cover Letter (Description of Change).pdf Cover Letter(s)
Adobe Acrobat PDF (331 kB)
2017-09-13 00:00:00
2017-09-13 00:00:00
3 Cover Letter (Agent Authorization).pdf Cover Letter(s)
Adobe Acrobat PDF (100 kB)
2017-09-13 00:00:00
2017-09-13 00:00:00
3 Confidentiality Request (Short term).pdf Cover Letter(s)
Adobe Acrobat PDF (66 kB)
2017-09-13 00:00:00
2017-09-13 00:00:00
3 Confidentiality Request (Long term).pdf Cover Letter(s)
Adobe Acrobat PDF (74 kB)
2017-09-13 00:00:00
2017-09-13 00:00:00

APP # 4 (2017-09-13)

App # Document Type Submitted
Available
4 RF Exposure Info (MPE).pdf RF Exposure Info
Adobe Acrobat PDF (265 kB)
2017-09-13 00:00:00
2017-09-13 00:00:00
4 Test Report (NII).pdf Test Report
Adobe Acrobat PDF (1145 kB)
2017-09-13 00:00:00
2017-09-13 00:00:00
4 Test Report (DTS-WLAN).pdf Test Report
Adobe Acrobat PDF (653 kB)
2017-09-13 00:00:00
2017-09-13 00:00:00
4 Confidentiality Request (Short term).pdf Cover Letter(s)
Adobe Acrobat PDF (66 kB)
2017-09-13 00:00:00
2017-09-13 00:00:00
4 Confidentiality Request (Long term).pdf Cover Letter(s)
Adobe Acrobat PDF (74 kB)
2017-09-13 00:00:00
2017-09-13 00:00:00
4 Cover Letter (Description of Change).pdf Cover Letter(s)
Adobe Acrobat PDF (331 kB)
2017-09-13 00:00:00
2017-09-13 00:00:00
4 Cover Letter (Agent Authorization).pdf Cover Letter(s)
Adobe Acrobat PDF (100 kB)
2017-09-13 00:00:00
2017-09-13 00:00:00

APP # 2 (2017-09-06)

App # Document Type Submitted
Available
2 RF Exposure Information (MPE).pdf RF Exposure Info
Adobe Acrobat PDF (251 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
2 Test Report (NII).pdf Test Report
Adobe Acrobat PDF (2030 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
2 Test Report (DTS).pdf Test Report
Adobe Acrobat PDF (1437 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
2 Test Report (DFS).pdf Test Report
Adobe Acrobat PDF (945 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
2 Test Report (Co-Location).pdf Test Report
Adobe Acrobat PDF (541 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
2 Label Sample & Label Location_rev.pdf ID Label/Location Info
Adobe Acrobat PDF (81 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
2 Cover Letter - Confidentiality Request - Short Term.pdf Cover Letter(s)
Adobe Acrobat PDF (98 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
2 Cover Letter - Confidentiality Request - Long Term.pdf Cover Letter(s)
Adobe Acrobat PDF (99 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
2 Modular Approval Request.pdf Cover Letter(s)
Adobe Acrobat PDF (107 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
2 Cover Letter - Agent Authorization.pdf Cover Letter(s)
Adobe Acrobat PDF (99 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
2 Attestation (DFS Client Declaration)_rev2.pdf Attestation Statements
Adobe Acrobat PDF (153 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
2 Attestation - Channel and Mode Declaration.pdf Attestation Statements
Adobe Acrobat PDF (96 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00

APP # 1 (2017-09-06)

App # Document Type Submitted
Available
1 RF Exposure Information (MPE).pdf RF Exposure Info
Adobe Acrobat PDF (251 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
1 Test Report (NII).pdf Test Report
Adobe Acrobat PDF (2030 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
1 Test Report (DTS).pdf Test Report
Adobe Acrobat PDF (1437 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
1 Test Report (DFS).pdf Test Report
Adobe Acrobat PDF (945 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
1 Test Report (Co-Location).pdf Test Report
Adobe Acrobat PDF (541 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
1 Label Sample & Label Location_rev.pdf ID Label/Location Info
Adobe Acrobat PDF (81 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
1 Cover Letter - Confidentiality Request - Short Term.pdf Cover Letter(s)
Adobe Acrobat PDF (98 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
1 Cover Letter - Confidentiality Request - Long Term.pdf Cover Letter(s)
Adobe Acrobat PDF (99 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
1 Modular Approval Request.pdf Cover Letter(s)
Adobe Acrobat PDF (107 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
1 Cover Letter - Agent Authorization.pdf Cover Letter(s)
Adobe Acrobat PDF (99 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
1 Attestation (DFS Client Declaration)_rev2.pdf Attestation Statements
Adobe Acrobat PDF (153 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
1 Attestation - Channel and Mode Declaration.pdf Attestation Statements
Adobe Acrobat PDF (96 kB)
2017-09-06 00:00:00
2017-09-06 00:00:00
1 Operational Description.pdf Operational Description
Adobe Acrobat PDF (103 kB)
2017-09-06 00:00:00
N/A

APP # 4 (2017-09-13)

App # Document Type Submitted
Available
4 Operational Description.pdf Operational Description
Adobe Acrobat PDF (94 kB)
2017-09-13 00:00:00
N/A

APP # 1 (2017-09-06)

App # Document Type Submitted
Available
1 Block Diagram_rev2.pdf Block Diagram
Adobe Acrobat PDF (55 kB)
2017-09-06 00:00:00
N/A
1 Test Setup Photo (DFS).pdf Test Setup Photos
Adobe Acrobat PDF (102 kB)
2017-09-06 00:00:00
2018-03-05 00:00:00

APP # 2 (2017-09-06)

App # Document Type Submitted
Available
2 External Photos_rev.pdf External Photos
Adobe Acrobat PDF (1288 kB)
2017-09-06 00:00:00
2018-03-05 00:00:00

APP # 3 (2017-09-13)

App # Document Type Submitted
Available
3 Internal Photos_rev.pdf Internal Photos
Adobe Acrobat PDF (2228 kB)
2017-09-13 00:00:00
2018-03-12 00:00:00

APP # 1 (2017-09-06)

App # Document Type Submitted
Available
1 Internal Photos.pdf Internal Photos
Adobe Acrobat PDF (2440 kB)
2017-09-06 00:00:00
2018-03-05 00:00:00

APP # 3 (2017-09-13)

App # Document Type Submitted
Available
3 Test Set Up Photos.pdf Test Setup Photos
Adobe Acrobat PDF (365 kB)
2017-09-13 00:00:00
2018-03-12 00:00:00

APP # 1 (2017-09-06)

App # Document Type Submitted
Available
1 Schematics_rev2.pdf Schematics
Adobe Acrobat PDF (1071 kB)
2017-09-06 00:00:00
N/A

APP # 2 (2017-09-06)

App # Document Type Submitted
Available
2 Test Setup Photo (WLAN).pdf Test Setup Photos
Adobe Acrobat PDF (462 kB)
2017-09-06 00:00:00
2018-03-05 00:00:00

APP # 1 (2017-09-06)

App # Document Type Submitted
Available
1 Users Manual_rev2.pdf Users Manual
Adobe Acrobat PDF (181 kB)
2017-09-06 00:00:00
2018-03-05 00:00:00

APP # 4 (2017-09-13)

App # Document Type Submitted
Available
4 Internal Photos_rev.pdf Internal Photos
Adobe Acrobat PDF (2228 kB)
2017-09-13 00:00:00
2018-03-12 00:00:00
4 Test Set Up Photos.pdf Test Setup Photos
Adobe Acrobat PDF (365 kB)
2017-09-13 00:00:00
2018-03-12 00:00:00

APP # 3 (2017-09-13)

App # Document Type Submitted
Available
3 External Photos.pdf External Photos
Adobe Acrobat PDF (1288 kB)
2017-09-13 00:00:00
2018-03-12 00:00:00

APP # 1 (2017-09-06)

App # Document Type Submitted
Available
1 External Photos_rev.pdf External Photos
Adobe Acrobat PDF (1288 kB)
2017-09-06 00:00:00
2018-03-05 00:00:00

APP # 2 (2017-09-06)

App # Document Type Submitted
Available
2 Software Operational Description_rev3.pdf Operational Description
Adobe Acrobat PDF (173 kB)
2017-09-06 00:00:00
N/A
2 Block Diagram_rev2.pdf Block Diagram
Adobe Acrobat PDF (55 kB)
2017-09-06 00:00:00
N/A
2 Test Setup Photo (DFS).pdf Test Setup Photos
Adobe Acrobat PDF (102 kB)
2017-09-06 00:00:00
2018-03-05 00:00:00
2 Operational Description.pdf Operational Description
Adobe Acrobat PDF (103 kB)
2017-09-06 00:00:00
N/A

APP # 1 (2017-09-06)

App # Document Type Submitted
Available
1 Test Setup Photo (WLAN).pdf Test Setup Photos
Adobe Acrobat PDF (462 kB)
2017-09-06 00:00:00
2018-03-05 00:00:00

APP # 4 (2017-09-13)

App # Document Type Submitted
Available
4 External Photos.pdf External Photos
Adobe Acrobat PDF (1288 kB)
2017-09-13 00:00:00
2018-03-12 00:00:00

APP # 2 (2017-09-06)

App # Document Type Submitted
Available
2 Internal Photos.pdf Internal Photos
Adobe Acrobat PDF (2440 kB)
2017-09-06 00:00:00
2018-03-05 00:00:00

APP # 3 (2017-09-13)

App # Document Type Submitted
Available
3 Operational Description.pdf Operational Description
Adobe Acrobat PDF (94 kB)
2017-09-13 00:00:00
N/A

APP # 1 (2017-09-06)

App # Document Type Submitted
Available
1 Software Operational Description_rev3.pdf Operational Description
Adobe Acrobat PDF (173 kB)
2017-09-06 00:00:00
N/A

APP # 2 (2017-09-06)

App # Document Type Submitted
Available
2 Users Manual_rev2.pdf Users Manual
Adobe Acrobat PDF (181 kB)
2017-09-06 00:00:00
2018-03-05 00:00:00
2 Schematics_rev2.pdf Schematics
Adobe Acrobat PDF (1071 kB)
2017-09-06 00:00:00
N/A

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Vivint. Inc.
FCC Registration Number (FRN): 0022442263
Alphanumeric FCC ID: 2AAASNM01
Unique Application Identifier: TRwHh1X92E4lriOYM4jAGg==
Line one: 4931 N. 300 W.
City: Provo
State: Utah
Country: United States
Zip Code: 84604

TCB Information
TCB Application Email Address: [email protected]
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: 2AAAS
Product Code: -NM01

Person at the applicant's address to receive grant or for contact
Name: Greg Hansen
Title: Regulatory Compliance Manager
Telephone Number: 801-229-6008 Extension:
Fax Number: 801-765-5701
Email: [email protected]
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   03/05/2018
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Vivint 2.4 GHz/5GHz WiFi Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
First Name:   Richard
Last Name:   Chen
Telephone Number: +886-3-3183232 Extension: 1884
Fax Number:  +886-3-2115834
E-mail:  [email protected]

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output power listed is maximum combined conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz and 40MHz bandwidth mode.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Amanda Wu
Title of authorized signature:  Senior Specialist

Complete items below if agent signs the application:

Firm Name:  Bureau Veriats Consumer Products Services (H.K. )
Name:  Amanda Amanda Amanda
Line 1:  Amanda
Line 2:  Amanda
P.O. Box:  Amanda
City:  Amanda
State:  Amanda
Country:  Amanda
Zip Code:  Amanda
Telephone Number:  88633183232 Extension:  1929
E-mail:  [email protected]

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Vivint. Inc.
FCC Registration Number (FRN): 0022442263
Alphanumeric FCC ID: 2AAASNM01
Unique Application Identifier: g/tgYkh5dww4AlvjgvFhUw==
Line one: 4931 N. 300 W.
City: Provo
State: Utah
Country: United States
Zip Code: 84604

TCB Information
TCB Application Email Address: [email protected]
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: 2AAAS
Product Code: -NM01

Person at the applicant's address to receive grant or for contact
Name: Greg Hansen
Title: Regulatory Compliance Manager
Telephone Number: 801-229-6008 Extension:
Fax Number: 801-765-5701
Email: [email protected]
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   03/05/2018
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Vivint 2.4 GHz/5GHz WiFi Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
First Name:   Richard
Last Name:   Chen
Telephone Number: +886-3-3183232 Extension: 1884
Fax Number:  +886-3-2115834
E-mail:  [email protected]

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output power listed is maximum combined conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz, 40MHz and 80MHz bandwidth mode.Operation in the band 5.15-5.25GHz is restricted for indoor usage only.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Amanda Wu
Title of authorized signature:  Senior Specialist

Complete items below if agent signs the application:

Firm Name:  Bureau Veritas Consumer Products Services (H.K.) L
Name:  Amanda Amanda Amanda
Line 1:  Amanda
Line 2:  Amanda
P.O. Box:  Amanda
City:  Amanda
State:  Amanda
Country:  Amanda
Zip Code:  Amanda
Telephone Number:  88633183232 Extension:  1929
E-mail:  [email protected]

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Vivint. Inc.
FCC Registration Number (FRN): 0022442263
Alphanumeric FCC ID: 2AAASNM01
Unique Application Identifier: LIrbIaCep9raZMZ3+JbzRQ==
Line one: 4931 N. 300 W.
City: Provo
State: Utah
Country: United States
Zip Code: 84604

TCB Information
TCB Application Email Address: [email protected]
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: 2AAAS
Product Code: -NM01

Person at the applicant's address to receive grant or for contact
Name: Greg Hansen
Title: Regulatory Compliance Manager
Telephone Number: 801-229-6008 Extension:
Fax Number: 801-765-5701
Email: [email protected]
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   03/12/2018
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   NII - Unlicensed National Information Infrastructure TX
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Vivint 2.4GHz/5GHz WiFi Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
First Name:   Richard
Last Name:   Chen
Telephone Number: +886-3-3183232 Extension: 1884
Fax Number:  +886-3-2115834
E-mail:  [email protected]

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive change for adding second source of Diplexer as described in this filing Output power listed is maximum combined conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz, 40MHz and 80MHz bandwidth mode.Operation in the band 5.15-5.25GHz is restricted for indoor usage only.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Amanda Wu
Title of authorized signature:  Senior Specialist

Complete items below if agent signs the application:

Firm Name:  Bureau Veritas Consumer Products Services (H.K.) l
Name:  Amanda Amanda Amanda
Line 1:  Amanda
Line 2:  Amanda
P.O. Box:  Amanda
City:  Amanda
State:  Amanda
Country:  Amanda
Zip Code:  Amanda
Telephone Number:  88633183232 Extension:  1929
E-mail:  [email protected]

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Vivint. Inc.
FCC Registration Number (FRN): 0022442263
Alphanumeric FCC ID: 2AAASNM01
Unique Application Identifier: aVP5wK1IhxeIcArf8rgjuA==
Line one: 4931 N. 300 W.
City: Provo
State: Utah
Country: United States
Zip Code: 84604

TCB Information
TCB Application Email Address: [email protected]
TCB Scope: A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID
Grantee Code: 2AAAS
Product Code: -NM01

Person at the applicant's address to receive grant or for contact
Name: Greg Hansen
Title: Regulatory Compliance Manager
Telephone Number: 801-229-6008 Extension:
Fax Number: 801-765-5701
Email: [email protected]
Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   03/12/2018
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   DTS - Digital Transmission System
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Vivint 2.4GHz/5GHz WiFi Module

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   Yes
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch
First Name:   Richard
Last Name:   Chen
Telephone Number: +886-3-3183232 Extension: 1884
Fax Number:  +886-3-2115834
E-mail:  [email protected]

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive change for adding second source of Diplexer as described in this filing Output power listed is maximum combined conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz and 40MHz bandwidth mode.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Amanda Wu
Title of authorized signature:  Senior Specialist

Complete items below if agent signs the application:

Firm Name:  Bureau Veritas Consumer Product Services (H.K.) l
Name:  Amanda Amanda Amanda
Line 1:  Amanda
Line 2:  Amanda
P.O. Box:  Amanda
City:  Amanda
State:  Amanda
Country:  Amanda
Zip Code:  Amanda
Telephone Number:  88633183232 Extension:  1929
E-mail:  [email protected]

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 09/13/2017

Application Dated: 09/13/2017
Vivint. Inc.
4931 N. 300 W.
Provo, UT 84604
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-NM01
Name of Grantee:  Vivint. Inc.
Equipment Class: Digital Transmission System
Notes: Vivint 2.4GHz/5GHz WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5  

Class II Permissive change for adding second source of Diplexer as described in this filing

Output power listed is maximum combined conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz and 40MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Vivint. Inc.
4931 N. 300 W.
Provo, UT 84604
United States
  Date of Grant: 09/13/2017

Application Dated: 09/13/2017
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-NM01
Name of Grantee:  Vivint. Inc.
Equipment Class: Digital Transmission System
Notes: Vivint 2.4GHz/5GHz WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5  

Class II Permissive change for adding second source of Diplexer as described in this filing

Output power listed is maximum combined conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz and 40MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA785291
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 09/06/2017

Application Dated: 09/06/2017
Vivint. Inc.
4931 N. 300 W.
Provo, UT 84604
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-NM01
Name of Grantee:  Vivint. Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Vivint 2.4 GHz/5GHz WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.099  
38 CC MO ND 15E 5260.0  -  5320.0 0.103  
38 CC MO ND 15E 5500.0  -  5700.0 0.076  
38 CC MO 15E 5745.0  -  5825.0 0.074  

Output power listed is maximum combined conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz, 40MHz and 80MHz bandwidth mode.Operation in the band 5.15-5.25GHz is restricted for indoor usage only.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Vivint. Inc.
4931 N. 300 W.
Provo, UT 84604
United States
  Date of Grant: 09/06/2017

Application Dated: 09/06/2017
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-NM01
Name of Grantee:  Vivint. Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Vivint 2.4 GHz/5GHz WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.099  
38 CC MO ND 15E 5260.0  -  5320.0 0.103  
38 CC MO ND 15E 5500.0  -  5700.0 0.076  
38 CC MO 15E 5745.0  -  5825.0 0.074  

Output power listed is maximum combined conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz, 40MHz and 80MHz bandwidth mode.Operation in the band 5.15-5.25GHz is restricted for indoor usage only.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:


EA723881
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 09/13/2017

Application Dated: 09/13/2017
Vivint. Inc.
4931 N. 300 W.
Provo, UT 84604
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-NM01
Name of Grantee:  Vivint. Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Vivint 2.4GHz/5GHz WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.089  
38 CC MO ND 15E 5260.0  -  5320.0 0.092  
38 CC MO ND 15E 5500.0  -  5700.0 0.069  
38 CC MO 15E 5745.0  -  5825.0 0.072  

Class II Permissive change for adding second source of Diplexer as described in this filing

Output power listed is maximum combined conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz, 40MHz and 80MHz bandwidth mode.Operation in the band 5.15-5.25GHz is restricted for indoor usage only.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Vivint. Inc.
4931 N. 300 W.
Provo, UT 84604
United States
  Date of Grant: 09/13/2017

Application Dated: 09/13/2017
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-NM01
Name of Grantee:  Vivint. Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Vivint 2.4GHz/5GHz WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.089  
38 CC MO ND 15E 5260.0  -  5320.0 0.092  
38 CC MO ND 15E 5500.0  -  5700.0 0.069  
38 CC MO 15E 5745.0  -  5825.0 0.072  

Class II Permissive change for adding second source of Diplexer as described in this filing

Output power listed is maximum combined conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz, 40MHz and 80MHz bandwidth mode.Operation in the band 5.15-5.25GHz is restricted for indoor usage only.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To:


EA687959
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 09/06/2017

Application Dated: 09/06/2017
Vivint. Inc.
4931 N. 300 W.
Provo, UT 84604
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-NM01
Name of Grantee:  Vivint. Inc.
Equipment Class: Digital Transmission System
Notes: Vivint 2.4 GHz/5GHz WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.553  

Output power listed is maximum combined conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz and 40MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Vivint. Inc.
4931 N. 300 W.
Provo, UT 84604
United States
  Date of Grant: 09/06/2017

Application Dated: 09/06/2017
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-NM01
Name of Grantee:  Vivint. Inc.
Equipment Class: Digital Transmission System
Notes: Vivint 2.4 GHz/5GHz WiFi Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.553  

Output power listed is maximum combined conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz and 40MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:


EA363766

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details


Facebook Twitter Google+ RSS © FCCID.io 2017