FCC ID 2AAAS-WR01

Wireless Router

by Vivint, Inc.

Grantee Code: 2AAAS   Product Code: WR01
Latest application date: 2014-12-03

FCC ID Device Details

FCC ID2AAAS-WR01
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AAAS
Product CodeWR01
Applicant BusinessVivint, Inc. 🇺🇸
Related Domains vivint.com
Equipment ClassWireless Router
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2014-12-03
5180-5240 MHzOriginal Equipment2014-12-03

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2015-05-31PDF 277.4 KB
Internal PhotosInternal Photos2015-05-31PDF 358.1 KB
External PhotosExternal Photos2015-05-31PDF 361.2 KB
Label LocationID Label/Location Info2014-12-03PDF 60 KB
Test Setup PhotosTest Setup Photos2015-05-31PDF 324.8 KB
Test Report Co-locationTest Report2014-12-03PDF 111.3 KB
Test Report RFTest Report2014-12-03PDF 1.4 MB
Test Report RFTest Report2014-12-03PDF 1.3 MB
Confidential LetterCover Letter(s)2014-12-03PDF 77.2 KB
DOC LetterCover Letter(s)2014-12-03PDF 25.7 KB
POACover Letter(s)2014-12-03PDF 57.1 KB
Human ExposureRF Exposure Info2014-12-03PDF 122.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 468.1 KB
Schematics Metadata onlySchematicsPDF 362 KB
Operational Description Metadata onlyOperational DescriptionPDF 97.9 KB
Operational Description Software Security Metadata onlyOperational DescriptionPDF 30.4 KB
Operational Description user interface Metadata onlyOperational DescriptionPDF 77.3 KB

Application Information

Application IDj2GQeBBjhfdwDCOY5Hd+8Q==
Final Action Date2014-12-03
Application PurposeOriginal Equipment
Applicant FRN0022442263
ModelWR01
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless Router
Responsible PartyGreg Hansen, Regulatory Compliance Manager, grhansen@vivint.com , 801-229-6008
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date05/31/2015
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40MHz bandwidth modes.

Applications

Application IDDatePurpose
j2GQeBBjhfdwDCOY5Hd+8Q==2014-12-03Original Equipment
X4Zi+v/Tj0WERvz8ZI6Ygw==2014-12-03Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.410000015CCC, MO
5180-5240 MHz0.50115E38, CC, MO
5745-5825 MHz0.815E38, CC, MO

Grants

TCB Grant - Application X4Zi+v/Tj0WERvz8ZI6Ygw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/03/2014

Application Dated: 12/02/2014
Vivint, Inc.
4931 N. 300 W.
Provo, UT 84604
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-WR01
Name of Grantee:  Vivint, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.501  
38 CC MO 15E 5745.0  -  5825.0 0.8  

Power listed is maximum combined output power conducted. This device is an indoor access point restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application X4Zi+v/Tj0WERvz8ZI6Ygw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Vivint, Inc.
4931 N. 300 W.
Provo, UT 84604
United States
  Date of Grant: 12/03/2014

Application Dated: 12/02/2014
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-WR01
Name of Grantee:  Vivint, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.501  
38 CC MO 15E 5745.0  -  5825.0 0.8  

Power listed is maximum combined output power conducted. This device is an indoor access point restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application j2GQeBBjhfdwDCOY5Hd+8Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/03/2014

Application Dated: 12/02/2014
Vivint, Inc.
4931 N. 300 W.
Provo, UT 84604
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-WR01
Name of Grantee:  Vivint, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.41  

Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application j2GQeBBjhfdwDCOY5Hd+8Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Vivint, Inc.
4931 N. 300 W.
Provo, UT 84604
United States
  Date of Grant: 12/03/2014

Application Dated: 12/02/2014
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-WR01
Name of Grantee:  Vivint, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.41  

Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: