FCC ID 2AAAS-CM04

Vivint Doorbell Camera Pro

by Vivint, Inc.

Grantee Code: 2AAAS   Product Code: CM04
Latest application date: 2019-11-12

FCC ID Device Details

FCC ID2AAAS-CM04
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AAAS
Product CodeCM04
Applicant BusinessVivint, Inc. 🇺🇸
Related Domains vivint.com
Equipment ClassVivint Doorbell Camera Pro
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2019-11-12
2402-2480 MHzOriginal Equipment2019-11-12

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2020-02-10PDF 831.4 KB
Internal PhotosInternal Photos2020-02-10PDF 5 MB
External PhotosExternal Photos2020-02-10PDF 475.6 KB
LabelID Label/Location Info2019-11-12PDF 974.9 KB
Label LocationID Label/Location Info2019-11-12PDF 79.5 KB
Test Setup Photos 2.4GTest Setup Photos2020-02-10PDF 639.9 KB
Test Setup Photos 5GTest Setup Photos2020-02-10PDF 700 KB
Test Setup Photos BT LETest Setup Photos2020-02-10PDF 639.9 KB
Test Setup Photos DFSTest Setup Photos2020-02-10PDF 157.7 KB
Test Report 2.4GTest Report2019-11-12PDF 2.7 MB
Test Report 5G 1 of 2Test Report2019-11-12PDF 4.6 MB
Test Report 5G 2 of 2Test Report2019-11-12PDF 1.9 MB
Test Report BT LETest Report2019-11-12PDF 1.5 MB
Test Report DFSTest Report2019-11-12PDF 749.9 KB
Confidentiality Request LetterCover Letter(s)2019-11-12PDF 86.3 KB
POACover Letter(s)2019-11-12PDF 84 KB
Professional InstallationCover Letter(s)2019-11-12PDF 80.7 KB
Professional Installation LetterCover Letter(s)2019-11-12PDF 80.7 KB
SDoCCover Letter(s)2019-11-12PDF 81.2 KB
RF ExposureRF Exposure Info2019-11-12PDF 264.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 307.6 KB
Schematics Metadata onlySchematicsPDF 947.6 KB
Operational Description Metadata onlyOperational DescriptionPDF 122.8 KB
Operational Description Software Security Metadata onlySDR Software/Security InfPDF 30.9 KB

Application Information

Application IDrkIGiJUUz9RGsWVuClOHLw==
Final Action Date2019-11-12
Application PurposeOriginal Equipment
Applicant FRN0022442263
ModelCM04
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionVivint Doorbell Camera Pro
Responsible PartyGreg Hansen, Regulatory Compliance Manager, grhansen@vivint.com , 801-229-6008
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 88633273456
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date02/10/2020
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is the maximum combined conducted output power. Professional installation required. This device must be installed and operated so as to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20, 40 and 80 MHz modes.

Applications

Application IDDatePurpose
rkIGiJUUz9RGsWVuClOHLw==2019-11-12Original Equipment
2HW6M8KxFpOePT3ktoMwfQ==2019-11-12Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.0038515CCC
2412-2462 MHz0.2426615CCC, MO
5180-5240 MHz0.1584915ECC, MO
5260-5320 MHz0.1599615ECC, MO
5500-5720 MHz0.1599615ECC, MO
5745-5825 MHz0.1698215ECC, MO

Grants

TCB Grant - Application rkIGiJUUz9RGsWVuClOHLw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/12/2019

Application Dated: 11/11/2019
Vivint, Inc.
4931 N. 300 W.
Provo, UT 84604
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-CM04
Name of Grantee:  Vivint, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Vivint Doorbell Camera Pro
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.15849  
CC MO 15E 5260.0  -  5320.0 0.15996  
CC MO 15E 5500.0  -  5720.0 0.15996  
CC MO 15E 5745.0  -  5825.0 0.16982  

Output Power listed is the maximum combined conducted output power. Professional installation required. This device must be installed and operated so as to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20, 40 and 80 MHz modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application rkIGiJUUz9RGsWVuClOHLw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Vivint, Inc.
4931 N. 300 W.
Provo, UT 84604
United States
  Date of Grant: 11/12/2019

Application Dated: 11/11/2019
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-CM04
Name of Grantee:  Vivint, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Vivint Doorbell Camera Pro
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.15849  
CC MO 15E 5260.0  -  5320.0 0.15996  
CC MO 15E 5500.0  -  5720.0 0.15996  
CC MO 15E 5745.0  -  5825.0 0.16982  

Output Power listed is the maximum combined conducted output power. Professional installation required. This device must be installed and operated so as to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20, 40 and 80 MHz modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2HW6M8KxFpOePT3ktoMwfQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/12/2019

Application Dated: 11/11/2019
Vivint, Inc.
4931 N. 300 W.
Provo, UT 84604
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-CM04
Name of Grantee:  Vivint, Inc.
Equipment Class: Digital Transmission System
Notes: Vivint Doorbell Camera Pro
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.24266  
CC 15C 2402.0  -  2480.0 0.00385  

Output Power listed is the maximum combined conducted output power. Professional installation required. This device must be installed and operated so as to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 2HW6M8KxFpOePT3ktoMwfQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Vivint, Inc.
4931 N. 300 W.
Provo, UT 84604
United States
  Date of Grant: 11/12/2019

Application Dated: 11/11/2019
 
Attention: Greg Hansen , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAAS-CM04
Name of Grantee:  Vivint, Inc.
Equipment Class: Digital Transmission System
Notes: Vivint Doorbell Camera Pro
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.24266  
CC 15C 2402.0  -  2480.0 0.00385  

Output Power listed is the maximum combined conducted output power. Professional installation required. This device must be installed and operated so as to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports 20 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: