FCC ID 2AABGQ3034-3M

BT Dual mode Module

by EnzyTek Technoloy Inc.

Grantee Code: 2AABG   Product Code: Q30343M
Latest application date: 2020-09-22

FCC ID Device Details

FCC ID2AABGQ3034-3M
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AABG
Product CodeQ30343M
Applicant BusinessEnzyTek Technoloy Inc. 🇹🇼
Related Domains enzytek.com wendell.com.tw
Equipment ClassBT Dual mode Module
Test FirmWendell Industrial Co., Ltd

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2020-09-22
2402-2480 MHzOriginal Equipment2020-09-22

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2020-09-22PDF 754.2 KB
Internal PhotosInternal Photos2020-09-22PDF 986.8 KB
External PhotosExternal Photos2020-09-22PDF 1.1 MB
ID LabelID Label/Location Info2020-09-22PDF 402 KB
Label Location InfoID Label/Location Info2020-09-22PDF 482.1 KB
Test Setup PhotosTest Setup Photos2020-09-22PDF 618.3 KB
Test Report_DSS_Part 1Test Report2020-09-22PDF 4.3 MB
Test Report_DSS_Part 2Test Report2020-09-22PDF 4.5 MB
Test Report_DTSTest Report2020-09-22PDF 4.4 MB
ConfidentialityCover Letter(s)2020-09-22PDF 79.7 KB
Declaration of authorizationCover Letter(s)2020-09-22PDF 81.6 KB
FCC Modular Approval RequestCover Letter(s)2020-09-22PDF 196.8 KB
MPERF Exposure Info2020-09-22PDF 846.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 43 KB
Schematics Metadata onlySchematicsPDF 77.7 KB
Operational Description Metadata onlyOperational DescriptionPDF 490 KB

Application Information

Application IDGxSz5kpVNSxsrE5R2g7Dgg==
Final Action Date2020-09-22
Application PurposeOriginal Equipment
Applicant FRN0022682793
ModelQ3034-3M
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionBT Dual mode Module
Responsible PartyPeter Hsieh, Manager, peter_hsieh@enzytek.com , 886-3-5736708
Technical ContactGary Wu, Wendell Industrial Co., Ltd., Gary_Wu@wendell.com.tw , 886-2-2299-6030
Non-Technical ContactKevin Liu, Wendell Industrial Co., Ltd., Kevin_Liu@wendell.com.tw , 886-2-2299-6030
Test FirmKevin Ko, Wendell Industrial Co., Ltd, Services-LAB@wendell.com.tw , +886-2-2917-5770
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
GxSz5kpVNSxsrE5R2g7Dgg==2020-09-22Original Equipment
6PkSxKNHkeDG2d6jXWNe/w==2020-09-22Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.007000015C
2402-2480 MHz0.017000015C

Grants

TCB Grant - Application GxSz5kpVNSxsrE5R2g7Dgg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 09/22/2020

Application Dated: 09/11/2020
EnzyTek Technoloy Inc.
7F, No. 35,Hsueh Fu Rd.
Hsinchu, 300
Taiwan
 
Attention: Peter Hsieh , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AABGQ3034-3M
Name of Grantee:  EnzyTek Technoloy Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BT Dual mode Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.017  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application GxSz5kpVNSxsrE5R2g7Dgg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EnzyTek Technoloy Inc.
7F, No. 35,Hsueh Fu Rd.
Hsinchu, 300
Taiwan
  Date of Grant: 09/22/2020

Application Dated: 09/11/2020
 
Attention: Peter Hsieh , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AABGQ3034-3M
Name of Grantee:  EnzyTek Technoloy Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BT Dual mode Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.017  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 6PkSxKNHkeDG2d6jXWNe/w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 09/22/2020

Application Dated: 09/11/2020
EnzyTek Technoloy Inc.
7F, No. 35,Hsueh Fu Rd.
Hsinchu, 300
Taiwan
 
Attention: Peter Hsieh , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AABGQ3034-3M
Name of Grantee:  EnzyTek Technoloy Inc.
Equipment Class: Digital Transmission System
Notes: BT Dual mode Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.007  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 6PkSxKNHkeDG2d6jXWNe/w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EnzyTek Technoloy Inc.
7F, No. 35,Hsueh Fu Rd.
Hsinchu, 300
Taiwan
  Date of Grant: 09/22/2020

Application Dated: 09/11/2020
 
Attention: Peter Hsieh , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AABGQ3034-3M
Name of Grantee:  EnzyTek Technoloy Inc.
Equipment Class: Digital Transmission System
Notes: BT Dual mode Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.007  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: