FCC ID 2AAD5-PRINTWIFI1500
SDIO Wireless Module
by ImageTech Corporation
Grantee Code: 2AAD5 Product Code: PRINTWIFI1500
Latest application date: 2015-03-17
FCC ID Device Details
| FCC ID | 2AAD5-PRINTWIFI1500 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AAD5 |
| Product Code | PRINTWIFI1500 |
| Applicant Business | ImageTech Corporation 🇺🇸 |
| Related Domains |  imagetechcorp.com |
| Equipment Class | SDIO Wireless Module |
| Test Firm | SIEMIC Labs |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2015-03-17 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMGN Grant Date: 07/10/2012 | 2014-11-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Host User Manual | Users Manual | 2015-03-17 | PDF 2.9 MB |
| User Manual Metadata only | Users Manual | 2015-03-17 | PDF 2.9 MB |
| Internal Photos | Internal Photos | 2015-03-17 | PDF 431.8 KB |
| External Photos | External Photos | 2015-03-17 | PDF 298 KB |
| External Photos | External Photos | 2014-11-22 | PDF 170 KB |
| Label & Location | ID Label/Location Info | 2014-11-22 | PDF 316 KB |
| Test Setup Photos | Test Setup Photos | 2015-03-17 | PDF 290.6 KB |
| Test Report | Test Report | 2015-03-17 | PDF 2.3 MB |
| Authorization Letter | Cover Letter(s) | 2015-03-17 | PDF 207.3 KB |
| Permissive Change Request Letter | Cover Letter(s) | 2015-03-17 | PDF 215.5 KB |
| Authorization Letter | Cover Letter(s) | 2014-11-22 | PDF 206.7 KB |
| Authorization Letter from Original Applicant | Cover Letter(s) | 2014-11-22 | PDF 437.4 KB |
| Change of ID Request Letter | Cover Letter(s) | 2014-11-22 | PDF 233.7 KB |
| MPE Calculation | RF Exposure Info | 2015-03-17 | PDF 101.5 KB |
Application Information
| Application ID | e39+BJoJBbIl6yqipggSzw== |
|---|---|
| Final Action Date | 2015-03-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027127315 |
| Model | PRINTWIFI1500 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | SDIO Wireless Module |
| Responsible Party | Rusty Wright, EVP, rwright@imagetechcorp.com , 7708803888 |
| Test Firm | Leslie BAI, SIEMIC Labs, leslie.bai@siemic.com  , 4085261188 |
| TCB Email | tcb@siemic.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to add host (PrintWiFi-1500 , PTS01-WRL) with new antenna (Taoglas). Single Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be collocated or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| e39+BJoJBbIl6yqipggSzw== | 2015-03-17 | Class II permissive change or modification of presently authorized equipment |
| /OhMJwKMrSQts1/VyyAtWQ== | 2014-11-22 | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMGN Grant Date: 07/10/2012 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.1947000 | 15C |
Grants
TCB Grant - Application e39+BJoJBbIl6yqipggSzw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/17/2015 Application Dated: 03/17/2015 |
| ImageTech Corporation |
| 3320 Caminito Cabo Viejo |
| Del Mar, CA 92104 |
| Attention: Rusty Wright , EVP |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAD5-PRINTWIFI1500 |
| Name of Grantee: | ImageTech Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1947 |
| C2PC to add host (PrintWiFi-1500 , PTS01-WRL) with new antenna (Taoglas). Single Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be collocated or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application e39+BJoJBbIl6yqipggSzw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ImageTech Corporation 3320 Caminito Cabo Viejo Del Mar, CA 92104 United States |
Date of Grant: 03/17/2015 Application Dated: 03/17/2015 |
| Attention: Rusty Wright , EVP |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAD5-PRINTWIFI1500 |
| Name of Grantee: | ImageTech Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1947 |
| C2PC to add host (PrintWiFi-1500 , PTS01-WRL) with new antenna (Taoglas). Single Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be collocated or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 11/22/2014 Application Dated: 11/22/2014 |
| ImageTech Corporation |
| 3320 Caminito Cabo Viejo |
| Del Mar, CA 92104 |
| Attention: Rusty Wright , EVP |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAD5-PRINTWIFI1500 |
| Name of Grantee: | ImageTech Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1947 |
| Single Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be collocated or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application /OhMJwKMrSQts1/VyyAtWQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ImageTech Corporation 3320 Caminito Cabo Viejo Del Mar, CA 92104 United States |
Date of Grant: 11/22/2014 Application Dated: 11/22/2014 |
| Attention: Rusty Wright , EVP |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAD5-PRINTWIFI1500 |
| Name of Grantee: | ImageTech Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1947 |
| Single Modular Approval. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be collocated or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| Mail To: |