FCC ID 2AAEX-SDABGN
SDIO Wireless Module
by Abbott Point of Care
Grantee Code: 2AAEX Product Code: SDABGN
Latest application date: 2016-06-29
Device Images
FCC ID Device Details
| FCC ID | 2AAEX-SDABGN |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AAEX |
| Product Code | SDABGN |
| Applicant Business | Abbott Point of Care 🇺🇸 |
| Related Domains |  abbott.com |
| Equipment Class | SDIO Wireless Module |
| Test Firm | Bureau Veritas Consumer Products Services, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-06-29 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-06-29 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-06-29 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-06-29 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2013-10-30 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-10-30 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2013-07-17 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-07-17 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 08/20/2012 | 2013-07-08 |
| 5180-5320 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 05/16/2013 | 2013-07-08 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 08/20/2012 | 2013-07-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Test Setup Photos | 2013-07-08 | PDF 110.6 KB |
| User Manual | Users Manual | 2013-07-08 | PDF 110.6 KB |
| EUT Photos | Internal Photos | 2016-06-29 | PDF 140.8 KB |
| Internal Photos | Internal Photos | 2016-06-29 | PDF 140.8 KB |
| Internal Photos | Internal Photos | 2013-07-17 | PDF 261.5 KB |
| External Photos | External Photos | 2013-07-17 | PDF 261.5 KB |
| Host Unit Photos | External Photos | 2013-07-17 | PDF 162.2 KB |
| EUT Photos | External Photos | 2013-07-08 | PDF 1.9 MB |
| Label | ID Label/Location Info | 2013-07-08 | PDF 59.7 KB |
| Label Location | ID Label/Location Info | 2013-07-08 | PDF 33.2 KB |
| Test Setup Photos | Test Setup Photos | 2016-06-29 | PDF 238.4 KB |
| Test Setup Photos | Test Setup Photos | 2013-07-17 | PDF 373.7 KB |
| Test Report UNII | Test Report | 2016-06-29 | PDF 3.6 MB |
| SAR Report | Test Report | 2013-10-30 | PDF 5.3 MB |
| RF Exposure | RF Exposure Info | 2013-07-17 | PDF 491 KB |
| Test Report | Test Report | 2013-07-17 | PDF 2 MB |
| Test Report | Test Report | 2013-07-17 | PDF 2 MB |
| Permissive Change Request Letter | Cover Letter(s) | 2016-06-29 | PDF 57.5 KB |
| Permissive Change Request Letter | Cover Letter(s) | 2016-06-29 | PDF 57.3 KB |
| Product Certification Rep Auth Letter | Cover Letter(s) | 2016-06-29 | PDF 71.3 KB |
| Product Certification Rep Auth Letter | Cover Letter(s) | 2016-06-29 | PDF 72.7 KB |
| Authorization Letter | Cover Letter(s) | 2013-10-30 | PDF 1 MB |
| Permissive Change Request Letter | Cover Letter(s) | 2013-10-30 | PDF 282.4 KB |
| Authorization Letter | Cover Letter(s) | 2013-07-17 | PDF 305.1 KB |
| POA | Cover Letter(s) | 2013-07-17 | PDF 116.2 KB |
| Permissive Change Request Letter | Cover Letter(s) | 2013-07-17 | PDF 272.4 KB |
| PoA | Cover Letter(s) | 2013-07-17 | PDF 116.2 KB |
| Supercede Request Letter | Cover Letter(s) | 2013-07-17 | PDF 45.9 KB |
| Authorization Letter | Cover Letter(s) | 2013-07-08 | PDF 222.6 KB |
| Authorization Letter from Original Applicant | Cover Letter(s) | 2013-07-08 | PDF 47.6 KB |
| Change of ID Request Letter | Cover Letter(s) | 2013-07-08 | PDF 281.7 KB |
| MPE Calculation | RF Exposure Info | 2016-06-29 | PDF 66.5 KB |
| Software Security Declaration Metadata only | Operational Description | PDF 282.6 KB |
Application Information
| Application ID | zsLuA5d2DKMX8pML+pgahg== |
|---|---|
| Final Action Date | 2016-06-29 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0022732473 |
| Model | SDABGN |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | SDIO Wireless Module |
| Responsible Party | Ruth Balerno, Associate Director, Regulatory Affairs, ruth.balerno@abbott.com , 609-454-9327 |
| Test Firm | Sarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com  , +1 925 963 4420 |
| TCB Email | tcb@siemic.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to update to UNII new rule. Original Grant Comment: Single Modular Approval for mobile platforms. Output power listed is Conducted. 5150-5250MHz is restricted for indoor use only. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| zsLuA5d2DKMX8pML+pgahg== | 2016-06-29 | Class II permissive change or modification of presently authorized equipment |
| fRDMQxtCKMVwP/PghyFV5A== | 2016-06-29 | Class II permissive change or modification of presently authorized equipment |
| aGRCXPoPPCVsFz7dEq98iw== | 2016-06-29 | Class II permissive change or modification of presently authorized equipment |
| JkXGFoVQ4YxRHAWFKPCAxg== | 2016-06-29 | Class II permissive change or modification of presently authorized equipment |
| jZN8fJU1dn+7jFq66jsdVg== | 2013-10-30 | Class II permissive change or modification of presently authorized equipment |
| C0M7KuD5dSnNCKZGF/XAsA== | 2013-10-30 | Class II permissive change or modification of presently authorized equipment |
| hoJI3Cv8JEX6RQEEHiLX/A== | 2013-07-17 | Class II permissive change or modification of presently authorized equipment |
| 9K6kn7eDDIa+r+YpYAxYOA== | 2013-07-17 | Class II permissive change or modification of presently authorized equipment |
| uAmcACDYh0sMo6KV5LalLQ== | 2013-07-08 | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 08/20/2012 |
| Z+jzMDM/SwwHoQoxebzbJA== | 2013-07-08 | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 05/16/2013 |
| /CWnNrvIUn3cPjNBLlq5yg== | 2013-07-08 | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAN Grant Date: 08/20/2012 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0086 | 15C | CC |
| 2402-2480 MHz | 0.0139000 | 15C | CC |
| 2412-2462 MHz | 0.1723 | 15C | CC |
| 5180-5240 MHz | 0.0247 | 15E | 38, CC |
| 5180-5320 MHz | 0.0247 | 15E | CC, ND |
| 5260-5320 MHz | 0.0247 | 15E | 38, CC, ND |
| 5500-5580 MHz | 0.018 | 15E | CC, ND |
| 5500-5580 MHz | 0.018 | 15E | 38, CC, ND |
| 5660-5700 MHz | 0.02 | 15E | CC, ND |
| 5660-5700 MHz | 0.2 | 15E | CC, ND |
| 5660-5700 MHz | 0.02 | 15E | 38, CC, ND |
| 5745-5825 MHz | 0.198 | 15C | CC |
| 5745-5825 MHz | 0.198 | 15E | 38, CC |
Grants
TCB Grant - Application zsLuA5d2DKMX8pML+pgahg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/29/2016 Application Dated: 06/29/2016 |
| Abbott Point of Care |
| 400 College Road East |
| Princeton, NJ 08540 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0247 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0247 | ||
| 38 CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| 38 CC ND | 15E | 5660.0 - 5700.0 | 0.02 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.198 |
| C2PC to update to UNII new rule. Original Grant Comment: Single Modular Approval for mobile platforms. Output power listed is Conducted. 5150-5250MHz is restricted for indoor use only. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application zsLuA5d2DKMX8pML+pgahg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Abbott Point of Care 400 College Road East Princeton, NJ 08540 United States |
Date of Grant: 06/29/2016 Application Dated: 06/29/2016 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0247 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0247 | ||
| 38 CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| 38 CC ND | 15E | 5660.0 - 5700.0 | 0.02 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.198 |
| C2PC to update to UNII new rule. Original Grant Comment: Single Modular Approval for mobile platforms. Output power listed is Conducted. 5150-5250MHz is restricted for indoor use only. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 07/08/2013 Application Dated: 07/08/2013 |
| Abbott Point of Care |
| 400 College Road East |
| Princeton, NJ 08540 |
| Attention: Jamie Yieh , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5320.0 | 0.0247 | ||
| CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| CC ND | 15E | 5660.0 - 5700.0 | 0.02 |
| Single modular approval for mobile platform. Output power listed is Conducted. 5150-5250MHz is restricted for indoor use only. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Z+jzMDM/SwwHoQoxebzbJA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Abbott Point of Care 400 College Road East Princeton, NJ 08540 United States |
Date of Grant: 07/08/2013 Application Dated: 07/08/2013 |
| Attention: Jamie Yieh , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5320.0 | 0.0247 | ||
| CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| CC ND | 15E | 5660.0 - 5700.0 | 0.02 |
| Single modular approval for mobile platform. Output power listed is Conducted. 5150-5250MHz is restricted for indoor use only. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 07/08/2013 Application Dated: 07/08/2013 |
| Abbott Point of Care |
| 400 College Road East |
| Princeton, NJ 08540 |
| Attention: Jamie Yieh , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.198 |
| Single modular approval for mobile platform. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application uAmcACDYh0sMo6KV5LalLQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Abbott Point of Care 400 College Road East Princeton, NJ 08540 United States |
Date of Grant: 07/08/2013 Application Dated: 07/08/2013 |
| Attention: Jamie Yieh , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.198 |
| Single modular approval for mobile platform. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 10/30/2013 Application Dated: 10/30/2013 |
| Abbott Point of Care |
| 400 College Road East |
| Princeton, NJ 08540 |
| Attention: Jamie Yieh , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5320.0 | 0.0247 | ||
| CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| CC ND | 15E | 5660.0 - 5700.0 | 0.2 |
| C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with Bluetooth disabled. Highest reported 1g SAR is 0.765 W/kg at 0 cm. Original Grant comment: Single Modular Approval for mobile platforms. Output power listed is Conducted. 5150-5250MHz is restricted for indoor use only. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application jZN8fJU1dn+7jFq66jsdVg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Abbott Point of Care 400 College Road East Princeton, NJ 08540 United States |
Date of Grant: 10/30/2013 Application Dated: 10/30/2013 |
| Attention: Jamie Yieh , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5320.0 | 0.0247 | ||
| CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| CC ND | 15E | 5660.0 - 5700.0 | 0.2 |
| C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with Bluetooth disabled. Highest reported 1g SAR is 0.765 W/kg at 0 cm. Original Grant comment: Single Modular Approval for mobile platforms. Output power listed is Conducted. 5150-5250MHz is restricted for indoor use only. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/29/2016 Application Dated: 06/29/2016 |
| Abbott Point of Care |
| 400 College Road East |
| Princeton, NJ 08540 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 |
| C2PC to update to UNII new rule. C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with Bluetooth disabled. Highest reported 1g SAR is 0.287 W/kg at 0 cm. Original Grant comment: Single modular approval for mobile platform. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application JkXGFoVQ4YxRHAWFKPCAxg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Abbott Point of Care 400 College Road East Princeton, NJ 08540 United States |
Date of Grant: 06/29/2016 Application Dated: 06/29/2016 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 |
| C2PC to update to UNII new rule. C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with Bluetooth disabled. Highest reported 1g SAR is 0.287 W/kg at 0 cm. Original Grant comment: Single modular approval for mobile platform. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 07/17/2013 Application Dated: 07/17/2013 |
| Abbott Point of Care |
| 400 College Road East |
| Princeton, NJ 08540 |
| Attention: Jamie Yieh , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5320.0 | 0.0247 | ||
| CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| CC ND | 15E | 5660.0 - 5700.0 | 0.02 |
| C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with Bluetooth disabled Original Grant comment: Single Modular Approval for mobile platforms. Output power listed is Conducted. 5150-5250MHz is restricted for indoor use only. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application hoJI3Cv8JEX6RQEEHiLX/A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Abbott Point of Care 400 College Road East Princeton, NJ 08540 United States |
Date of Grant: 07/17/2013 Application Dated: 07/17/2013 |
| Attention: Jamie Yieh , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC ND | 15E | 5180.0 - 5320.0 | 0.0247 | ||
| CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| CC ND | 15E | 5660.0 - 5700.0 | 0.02 |
| C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with Bluetooth disabled Original Grant comment: Single Modular Approval for mobile platforms. Output power listed is Conducted. 5150-5250MHz is restricted for indoor use only. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/29/2016 Application Dated: 06/29/2016 |
| Abbott Point of Care |
| 400 College Road East |
| Princeton, NJ 08540 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0247 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0247 | ||
| 38 CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| 38 CC ND | 15E | 5660.0 - 5700.0 | 0.02 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.198 |
| C2PC to update to UNII new rule. C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with Bluetooth disabled. Highest reported 1g SAR is 0.765 W/kg at 0 cm. Original Grant comment: Single Modular Approval for mobile platforms. Output power listed is Conducted. 5150-5250MHz is restricted for indoor use only. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application fRDMQxtCKMVwP/PghyFV5A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Abbott Point of Care 400 College Road East Princeton, NJ 08540 United States |
Date of Grant: 06/29/2016 Application Dated: 06/29/2016 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0247 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0247 | ||
| 38 CC ND | 15E | 5500.0 - 5580.0 | 0.018 | ||
| 38 CC ND | 15E | 5660.0 - 5700.0 | 0.02 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.198 |
| C2PC to update to UNII new rule. C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with Bluetooth disabled. Highest reported 1g SAR is 0.765 W/kg at 0 cm. Original Grant comment: Single Modular Approval for mobile platforms. Output power listed is Conducted. 5150-5250MHz is restricted for indoor use only. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 10/30/2013 Application Dated: 10/30/2013 |
| Abbott Point of Care |
| 400 College Road East |
| Princeton, NJ 08540 |
| Attention: Jamie Yieh , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.198 |
| C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with Bluetooth disabled. Highest reported 1g SAR is 0.287 W/kg at 0 cm. Original Grant comment: Single modular approval for mobile platform. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application C0M7KuD5dSnNCKZGF/XAsA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Abbott Point of Care 400 College Road East Princeton, NJ 08540 United States |
Date of Grant: 10/30/2013 Application Dated: 10/30/2013 |
| Attention: Jamie Yieh , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.198 |
| C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with Bluetooth disabled. Highest reported 1g SAR is 0.287 W/kg at 0 cm. Original Grant comment: Single modular approval for mobile platform. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/29/2016 Application Dated: 06/29/2016 |
| Abbott Point of Care |
| 400 College Road East |
| Princeton, NJ 08540 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 |
| C2PC to update to UNII new rule. Original Grant Comment: Single modular approval for mobile platform. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application aGRCXPoPPCVsFz7dEq98iw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Abbott Point of Care 400 College Road East Princeton, NJ 08540 United States |
Date of Grant: 06/29/2016 Application Dated: 06/29/2016 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 |
| C2PC to update to UNII new rule. Original Grant Comment: Single modular approval for mobile platform. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 07/17/2013 Application Dated: 07/17/2013 |
| Abbott Point of Care |
| 400 College Road East |
| Princeton, NJ 08540 |
| Attention: Jamie Yieh , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.198 |
| C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with Bluetooth disabled Original Grant comment: Single modular approval for mobile platform. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 9K6kn7eDDIa+r+YpYAxYOA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Abbott Point of Care 400 College Road East Princeton, NJ 08540 United States |
Date of Grant: 07/17/2013 Application Dated: 07/17/2013 |
| Attention: Jamie Yieh , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0086 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1723 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.198 |
| C2PC to add portable host (Dragonfly Hand-held Blood Analyzer Unit) with Bluetooth disabled Original Grant comment: Single modular approval for mobile platform. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 07/08/2013 Application Dated: 07/08/2013 |
| Abbott Point of Care |
| 400 College Road East |
| Princeton, NJ 08540 |
| Attention: Jamie Yieh , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0139 |
| Single modular approval for mobile platform. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application /CWnNrvIUn3cPjNBLlq5yg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Abbott Point of Care 400 College Road East Princeton, NJ 08540 United States |
Date of Grant: 07/08/2013 Application Dated: 07/08/2013 |
| Attention: Jamie Yieh , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDABGN |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0139 |
| Single modular approval for mobile platform. Output power listed is Conducted. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |