FCC ID 2AAEX-SDMAC
SDIO Wireless Module
by Abbott Point of Care
Grantee Code: 2AAEX Product Code: SDMAC
Latest application date: 2019-11-22
FCC ID Device Details
| FCC ID | 2AAEX-SDMAC |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AAEX |
| Product Code | SDMAC |
| Applicant Business | Abbott Point of Care 🇺🇸 |
| Related Domains |  abbott.com |
| Equipment Class | SDIO Wireless Module |
| Test Firm | Bureau Veritas Consumer Products Services, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2019-11-22 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-11-22 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAC Grant Date: 11/08/2016 | 2019-10-31 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAC Grant Date: 11/08/2016 | 2019-10-31 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAC Grant Date: 11/08/2016 | 2019-10-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2020-05-20 | PDF 237.8 KB |
| Internal Photos | Internal Photos | 2019-10-31 | PDF 364.4 KB |
| External Photos | External Photos | 2020-05-20 | PDF 270.3 KB |
| External Photos | External Photos | 2019-10-31 | PDF 274.3 KB |
| External Photos Rev01 | External Photos | 2019-10-31 | PDF 146 KB |
| Product Label | ID Label/Location Info | 2019-10-31 | PDF 53.2 KB |
| Product Label Rev01 | ID Label/Location Info | 2019-10-31 | PDF 54 KB |
| Test Setup Photos | Test Setup Photos | 2020-05-20 | PDF 464.8 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2019-11-22 | PDF 111.3 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2019-11-22 | PDF 151.5 KB |
| Product Certification Representative Auth Letter | Cover Letter(s) | 2019-11-22 | PDF 562.4 KB |
| Change of ID Auth Letter | Cover Letter(s) | 2019-10-31 | PDF 681.4 KB |
| Change of ID Request Letter | Cover Letter(s) | 2019-10-31 | PDF 43.6 KB |
| PoA | Cover Letter(s) | 2019-10-31 | PDF 30.4 KB |
| Product Certification Representative Auth Letter | Cover Letter(s) | 2019-10-31 | PDF 35.4 KB |
| SAR Calibratrion | RF Exposure Info | 2019-11-22 | PDF 1.6 MB |
| SAR Report | RF Exposure Info | 2019-11-22 | PDF 4.3 MB |
Application Information
| Application ID | PydFsZutoSk2HmNC8SZWFw== |
|---|---|
| Final Action Date | 2019-11-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0022732473 |
| Model | SDMAC |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | SDIO Wireless Module |
| Responsible Party | Ruth Balerno, Associate Director, Regulatory Affairs, ruth.balerno@abbott.com , 609-454-9327 |
| Test Firm | Sarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com  , +1 925 963 4420 |
| TCB Email | tcb@siemic.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 05/20/2020 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add portable host model 300W. Bluetooth is disabled via software. The highest reported body SAR value is 0.54 W/kg. Single Modular Approval. Output power listed is Conducted (Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and endusers must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be collocated or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| PydFsZutoSk2HmNC8SZWFw== | 2019-11-22 | Class II permissive change or modification of presently authorized equipment |
| KwzO/sBZn/9Obx2CH76EFA== | 2019-11-22 | Class II permissive change or modification of presently authorized equipment |
| xZzD7X0fRil7RtxwRLFm9Q== | 2019-10-31 | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAC Grant Date: 11/08/2016 |
| q/Zi6/VWAvNTr1sFtfH24A== | 2019-10-31 | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAC Grant Date: 11/08/2016 |
| SAidO9g+AuQKm6GcHKV46w== | 2019-10-31 | Change in identification of presently authorized equipment. Original FCC ID: N6C-SDMAC Grant Date: 11/08/2016 |
Equipment Authorization
Grants
TCB Grant - Application xZzD7X0fRil7RtxwRLFm9Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 10/31/2019 Application Dated: 10/31/2019 |
| Abbott Point of Care |
| 400 College Road East |
| Princeton, NJ 08540 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDMAC |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0251 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.009 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.009 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.079 |
| Change of ID from FCC ID: N6C-SDMAC Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application xZzD7X0fRil7RtxwRLFm9Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Abbott Point of Care 400 College Road East Princeton, NJ 08540 United States |
Date of Grant: 10/31/2019 Application Dated: 10/31/2019 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDMAC |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0251 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.009 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.009 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.079 |
| Change of ID from FCC ID: N6C-SDMAC Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 10/31/2019 Application Dated: 10/31/2019 |
| Abbott Point of Care |
| 400 College Road East |
| Princeton, NJ 08540 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDMAC |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0014 |
| Change of ID from FCC ID: N6C-SDMAC Single Modular Approval. Output power listed is Conducted (Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multitransmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application SAidO9g+AuQKm6GcHKV46w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Abbott Point of Care 400 College Road East Princeton, NJ 08540 United States |
Date of Grant: 10/31/2019 Application Dated: 10/31/2019 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDMAC |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0014 |
| Change of ID from FCC ID: N6C-SDMAC Single Modular Approval. Output power listed is Conducted (Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multitransmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 10/31/2019 Application Dated: 10/31/2019 |
| Abbott Point of Care |
| 400 College Road East |
| Princeton, NJ 08540 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDMAC |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0016 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.2999 |
| Change of ID from FCC ID: N6C-SDMAC Single Modular Approval. Output power listed is Conducted (Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and endusers must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be collocated or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application q/Zi6/VWAvNTr1sFtfH24A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Abbott Point of Care 400 College Road East Princeton, NJ 08540 United States |
Date of Grant: 10/31/2019 Application Dated: 10/31/2019 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDMAC |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0016 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.2999 |
| Change of ID from FCC ID: N6C-SDMAC Single Modular Approval. Output power listed is Conducted (Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and endusers must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be collocated or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 11/22/2019 Application Dated: 11/22/2019 |
| Abbott Point of Care |
| 400 College Road East |
| Princeton, NJ 08540 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDMAC |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2999 |
| Class II Permissive Change to add portable host model 300W. Bluetooth is disabled via software. The highest reported body SAR value is 0.54 W/kg. Single Modular Approval. Output power listed is Conducted (Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and endusers must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be collocated or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application PydFsZutoSk2HmNC8SZWFw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Abbott Point of Care 400 College Road East Princeton, NJ 08540 United States |
Date of Grant: 11/22/2019 Application Dated: 11/22/2019 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDMAC |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Digital Transmission System |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.2999 |
| Class II Permissive Change to add portable host model 300W. Bluetooth is disabled via software. The highest reported body SAR value is 0.54 W/kg. Single Modular Approval. Output power listed is Conducted (Peak). For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and endusers must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be collocated or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 11/22/2019 Application Dated: 11/22/2019 |
| Abbott Point of Care |
| 400 College Road East |
| Princeton, NJ 08540 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDMAC |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0251 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.009 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.009 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.079 |
| Class II Permissive Change to add portable host model 300W. The highest reported body SAR value is 0.99 W/kg. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application KwzO/sBZn/9Obx2CH76EFA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Abbott Point of Care 400 College Road East Princeton, NJ 08540 United States |
Date of Grant: 11/22/2019 Application Dated: 11/22/2019 |
| Attention: Ruth Balerno , Associate Director, Regulatory Affairs |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AAEX-SDMAC |
| Name of Grantee: | Abbott Point of Care |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SDIO Wireless Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0251 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.009 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.009 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.079 |
| Class II Permissive Change to add portable host model 300W. The highest reported body SAR value is 0.99 W/kg. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |