NB01Q0 NB01Q RF Exposure Info MPE Report Sequans Communications

Sequans Communications NB01Q

Page 1 of NB01Q0 NB01Q RF Exposure Info MPE Report Sequans Communications
Page 2 of NB01Q0 NB01Q RF Exposure Info MPE Report Sequans Communications
Page 3 of NB01Q0 NB01Q RF Exposure Info MPE Report Sequans Communications
Page 4 of NB01Q0 NB01Q RF Exposure Info MPE Report Sequans Communications
Page 5 of NB01Q0 NB01Q RF Exposure Info MPE Report Sequans Communications
Page 6 of NB01Q0 NB01Q RF Exposure Info MPE Report Sequans Communications

RF Exposure Report
Report No.: SA180704C07A
FCC ID: 2AAGMNB01Q0
Test Model: NB01Q0
Received Date: Jul. 04, 2018
Date of Evaluation: Aug. 14, 2018
Issued Date: Aug. 15, 2018
Applicant: SEQUANS Communications
Address: Les portes de la Défense – Hall A, 15/55 boulevard Charles de Gaulle,
92700 Colombes, France
Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch
Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan,
R.O.C.
Test Location: No. 19, Hwa Ya 2nd Rd, Wen Hwa Vil, Kwei Shan Dist., Taoyuan City
33383, Taiwan (R.O.C)
FCC Registration /
Designation Number:
788550 / TW0003
This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted
only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this
report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless
specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to
us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such
notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your
unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the
uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be
used by the client to claim product certification, approval, or endorsement by TAF or any government agencies.
Report No.: SA180704C07A
Reference No.: 180719C15
Page No. 1 / 6
Report Format Version: 6.1.1
Table of Contents
Release Control Record .................................................................................................................................. 3
Certificate of Conformity ...................................................................................................................... 4
RF Exposure .......................................................................................................................................... 5
2.1
2.2
2.3
2.4
Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5
MPE Calculation Formula ................................................................................................................... 5
Classification ....................................................................................................................................... 5
Calculation Result of Maximum Conducted Power ............................................................................. 6
Report No.: SA180704C07A
Reference No.: 180719C15
Page No. 2 / 6
Report Format Version: 6.1.1
Release Control Record
Issue No.
Description
Date Issued
SA180704C07A
Original Release
Aug. 15, 2018
Report No.: SA180704C07A
Reference No.: 180719C15
Page No. 3 / 6
Report Format Version: 6.1.1
1
Certificate of Conformity
Product: NB01Q
Brand: SEQUANS
Test Model: NB01Q0
Sample Status: Identical Prototype
Applicant: SEQUANS Communications
Date of Evaluation: Aug. 14, 2018
Standards: FCC Part 2 (Section 2.1091)
KDB 447498 D01 General RF Exposure Guidance v06
IEEE C95.1-1992
The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd.,
Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data
evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts
of the measurements of the sample’s RF characteristics under the conditions specified in this report.
Prepared by :
Date:
Aug. 15, 2018
Date:
Aug. 15, 2018
Gina Liu / Specialist
Approved by :
Dylan Chiou / Project Engineer
Report No.: SA180704C07A
Reference No.: 180719C15
Page No. 4 / 6
Report Format Version: 6.1.1
2
RF Exposure
2.1
Limits for Maximum Permissible Exposure (MPE)
Frequency Range
(MHz)
Electric Field
Strength (V/m)
Magnetic Field
Strength (A/m)
Power Density
(mW/cm )
Average Time
(minutes)
Limits For General Population / Uncontrolled Exposure
0.3-1.34
614
1.63
(100)*
1.34-30
824/f
2.19/f
(180/f )*
30
30-300
27.5
0.073
0.2
30
300-1500
…
…
f/1500
30
1500-100,000
…
…
1.0
30
30
f = Frequency in MHz ; *Plane-wave equivalent power density
2.2
MPE Calculation Formula
Pd = (Pout*G) / (4*pi*r )
where
Pd = power density in mW/cm
Pout = output power to antenna in mW
G = gain of antenna in linear scale
Pi = 3.1416
R = distance between observation point and center of the radiator in cm
2.3
Classification
The antenna of this product, under normal use condition, is at least 20cm away from the body of the user.
So, this device is classified as Mobile Device.
Report No.: SA180704C07A
Reference No.: 180719C15
Page No. 5 / 6
Report Format Version: 6.1.1
2.4
Calculation Result of Maximum Conducted Power
Band
Frequency Band
(MHz)
Max Power
(dBm)
Antenna Gain
(dBi)
Distance
(cm)
Power Density
(mW/cm )
Limit
(mW/cm )
LTE PCS-H
block
1915-1920
23.26
2.79
20
0.080
1.00
Conclusion:
The formula of calculated the MPE is:
CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1
CPD = Calculation power density
LPD = Limit of power density
LTE PCS-H block = 0.080 / 1.00 = 0.080
Therefore the maximum calculations of above situations are less than the “1” limit.
--- END ---
Report No.: SA180704C07A
Reference No.: 180719C15
Page No. 6 / 6
Report Format Version: 6.1.1
Download: NB01Q0 NB01Q RF Exposure Info MPE Report Sequans Communications
Mirror Download [FCC.gov]NB01Q0 NB01Q RF Exposure Info MPE Report Sequans Communications
Document ID3990708
Application IDWN3DkeZlnstgsS7cb8QTIA==
Document DescriptionMPE Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize19.62kB (245224 bits)
Date Submitted2018-09-04 00:00:00
Date Available2018-09-05 00:00:00
Creation Date2018-08-30 14:19:00
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2018-08-30 14:19:21
Document TitleMPE Report
Document CreatorMicrosoft® Office Word 2007

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2018:08:30 14:19:00+08:00
Creator                         : Microsoft® Office Word 2007
Modify Date                     : 2018:08:30 14:19:21+08:00
Language                        : zh-TW
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : Microsoft® Office Word 2007
Metadata Date                   : 2018:08:30 14:19:21+08:00
Producer                        : Microsoft® Office Word 2007
Format                          : application/pdf
Document ID                     : uuid:37119ca2-c4e5-48ba-95b6-e315709dca9d
Instance ID                     : uuid:e60ddfd4-cf19-42e6-b158-c304e20eedd5
Page Count                      : 6