FCC ID 2AAH78723BSV13

WiFi and Bluetooth Module

by Shenzhen Bopengfa Elec&Technology; Co., Ltd.

Grantee Code: 2AAH7   Product Code: 8723BSV13
Latest application date: 2014-11-06

FCC ID Device Details

FCC ID2AAH78723BSV13
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AAH7
Product Code8723BSV13
Applicant BusinessShenzhen Bopengfa Elec&Technology; Co., Ltd. 🇨🇳
Equipment ClassWiFi and Bluetooth Module
Test FirmShenzhen POCE Technology Co.,Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2014-11-06
2402-2480 MHzOriginal Equipment2014-11-06

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2014-11-06PDF 1.8 MB
IntInternal Photos2014-11-06PDF 108.6 KB
ExtExternal Photos2014-11-06PDF 108.6 KB
ArtworkID Label/Location Info2014-11-06PDF 17.6 KB
LabelID Label/Location Info2014-11-06PDF 17.6 KB
SetupTest Setup Photos2014-11-06PDF 171.5 KB
DTS BT 4 0Test Report2014-11-06PDF 446.7 KB
DTS WiFiTest Report2014-11-06PDF 2 MB
Test ReportTest Report2014-11-06PDF 1.6 MB
AuthorizartionCover Letter(s)2014-11-06PDF 30.9 KB
AuthorizationCover Letter(s)2014-11-06PDF 30.9 KB
ConfidCover Letter(s)2014-11-06PDF 29.5 KB
LTCCover Letter(s)2014-11-06PDF 29.5 KB
Modular RequestCover Letter(s)2014-11-06PDF 7.6 KB
RFxRF Exposure Info2014-11-06PDF 53.4 KB
Block Metadata onlyBlock DiagramPDF 114.9 KB
Schema Metadata onlySchematicsPDF 21 KB
Ops Metadata onlyOperational DescriptionPDF 114.9 KB

Application Information

Application IDna5ofPPahCbNt+gfX4Y4TQ==
Final Action Date2014-11-06
Application PurposeOriginal Equipment
Applicant FRN0022778823
Model8723BSV13
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionWiFi and Bluetooth Module
Responsible PartyDragon Fang, General Manager, fcctcb@foxmail.com , 0755-61156511
Technical ContactJack Kang, Shenzhen POCE Technology Co., Ltd, (86)755-29113252
Test FirmBill Yuan, Shenzhen POCE Technology Co.,Ltd., bovey@poce-cert.com , 86-755-29113252
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Modular Approval (LMA). Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter approval procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
na5ofPPahCbNt+gfX4Y4TQ==2014-11-06Original Equipment
lNTXStjlWAB++cFJEvLZ2A==2014-11-06Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.000215CCC
2402-2480 MHz0.000900015CCC
2412-2462 MHz0.040815CCC
2422-2452 MHz0.024615CCC

Grants

TCB Grant - Application na5ofPPahCbNt+gfX4Y4TQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 11/06/2014

Application Dated: 11/06/2014
Shenzhen Bopengfa Elec&Technology Co., Ltd.
Bldg 56A, 3/F, Baotian RD3, Xixiang Town,
Baoan District
Shenzhen,
China
 
Attention: Dragon Fang , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAH78723BSV13
Name of Grantee:  Shenzhen Bopengfa Elec&Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WiFi and Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0009  

Limited Modular Approval (LMA). Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter approval procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application na5ofPPahCbNt+gfX4Y4TQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Bopengfa Elec&Technology Co., Ltd.
Bldg 56A, 3/F, Baotian RD3, Xixiang Town, Baoan District
Shenzhen,
China
  Date of Grant: 11/06/2014

Application Dated: 11/06/2014
 
Attention: Dragon Fang , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAH78723BSV13
Name of Grantee:  Shenzhen Bopengfa Elec&Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WiFi and Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0009  

Limited Modular Approval (LMA). Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter approval procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application lNTXStjlWAB++cFJEvLZ2A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 11/06/2014

Application Dated: 11/06/2014
Shenzhen Bopengfa Elec&Technology Co., Ltd.
Bldg 56A, 3/F, Baotian RD3, Xixiang Town,
Baoan District
Shenzhen,
China
 
Attention: Dragon Fang , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAH78723BSV13
Name of Grantee:  Shenzhen Bopengfa Elec&Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: WiFi and Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0002  
CC 15C 2412.0  -  2462.0 0.0408  
CC 15C 2422.0  -  2452.0 0.0246  

Limited Modular Approval (LMA). Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter approval procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application lNTXStjlWAB++cFJEvLZ2A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Bopengfa Elec&Technology Co., Ltd.
Bldg 56A, 3/F, Baotian RD3, Xixiang Town, Baoan District
Shenzhen,
China
  Date of Grant: 11/06/2014

Application Dated: 11/06/2014
 
Attention: Dragon Fang , General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AAH78723BSV13
Name of Grantee:  Shenzhen Bopengfa Elec&Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: WiFi and Bluetooth Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0002  
CC 15C 2412.0  -  2462.0 0.0408  
CC 15C 2422.0  -  2452.0 0.0246  

Limited Modular Approval (LMA). Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter approval procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: