1. FCC ID
  2. 2AATL
  3. 2AATL-6220T-IF

FCC ID 2AATL-6220T-IF

WiFi+BT module

by FN-LINK TECHNOLOGY LIMITED

Grantee Code: 2AATL   Product Code: 6220TIF
Latest application date: 2024-07-12

FCC ID Device Details

FCC ID2AATL-6220T-IF
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AATL
Product Code6220TIF
Applicant BusinessFN-LINK TECHNOLOGY LIMITED 🇨🇳
Related Domains fn-link.com
Equipment ClassWiFi+BT module
Test FirmShenzhen Alpha Product Testing Co., LTD.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2024-07-12
5180-5240 MHzOriginal Equipment2024-07-12

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2024-07-12PDF 1.8 MB
Internal PhotosInternal Photos2024-07-12PDF 1.2 MB
External PhotosExternal Photos2024-07-12PDF 1.7 MB
Label and Label LocationID Label/Location Info2024-07-12PDF 415 KB
Test Setup PhotosTest Setup Photos2024-07-12PDF 492 KB
Antenna DetailsTest Report2024-07-12PDF 1.1 MB
Test ReportTest Report2024-07-12PDF 2.3 MB
Test ReportTest Report2024-07-12PDF 5.4 MB
Test ReportTest Report2024-07-12PDF 5.5 MB
Attestation StatementAttestation Statements2024-07-12PDF 107.6 KB
Attestation StatementAttestation Statements2024-07-12PDF 133.8 KB
Attestation statementAttestation Statements2024-07-12PDF 133.8 KB
Cover LettersCover Letter(s)2024-07-12PDF 140.8 KB
RF Exposure infoRF Exposure Info2024-07-12PDF 297.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 63.1 KB
Schematics Metadata onlySchematicsPDF 20.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 4.6 KB

Application Information

Application IDZyx/aJcsZY+DrQGB1dVfEA==
Final Action Date2024-07-12
Application PurposeOriginal Equipment
Applicant FRN0022902761
Model6220T-IF
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWiFi+BT module
Responsible PartyJim Hu, Manager, jim@fn-link.com , +8613538178944
Test FirmReal Yak, Shenzhen Alpha Product Testing Co., LTD., e016@a-lab.cn , +86 755 29766001
TCB Emailjin.xu@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. This device has a 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance

Applications

Application IDDatePurpose
Zyx/aJcsZY+DrQGB1dVfEA==2024-07-12Original Equipment
NRY8xFuKRiSNnEN7SuapXg==2024-07-12Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.0027415CCC
2412-2462 MHz0.0533215CCC
5180-5240 MHz0.0322815ECC
5260-5320 MHz0.0375815ECC, ND
5500-5700 MHz0.03715ECC, ND
5745-5825 MHz0.0489915ECC

Grants

TCB Grant - Application Zyx/aJcsZY+DrQGB1dVfEA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 07/12/2024

Application Dated: 07/12/2024
FN-LINK TECHNOLOGY LIMITED
No.8, Litong Road, Liuyang Economic &
Technical Development Zone,
Changsha, Hunan,
China
 
Attention: Jim Hu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6220T-IF
Name of Grantee:  FN-LINK TECHNOLOGY LIMITED
Equipment Class: Digital Transmission System
Notes: WiFi+BT module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00274  
CC 15C 2412.0  -  2462.0 0.05332  

Power listed is conducted. This device has a 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Zyx/aJcsZY+DrQGB1dVfEA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

FN-LINK TECHNOLOGY LIMITED
No.8, Litong Road, Liuyang Economic & Technical Development Zone,
Changsha, Hunan,
China 		  Date of Grant: 07/12/2024

Application Dated: 07/12/2024
 
Attention: Jim Hu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6220T-IF
Name of Grantee:  FN-LINK TECHNOLOGY LIMITED
Equipment Class: Digital Transmission System
Notes: WiFi+BT module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.00274  
CC 15C 2412.0  -  2462.0 0.05332  

Power listed is conducted. This device has a 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application NRY8xFuKRiSNnEN7SuapXg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 07/12/2024

Application Dated: 07/12/2024
FN-LINK TECHNOLOGY LIMITED
No.8, Litong Road, Liuyang Economic &
Technical Development Zone,
Changsha, Hunan,
China
 
Attention: Jim Hu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6220T-IF
Name of Grantee:  FN-LINK TECHNOLOGY LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi+BT module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.03228  
CC ND 15E 5260.0  -  5320.0 0.03758  
CC ND 15E 5500.0  -  5700.0 0.037  
CC 15E 5745.0  -  5825.0 0.04899  

Power listed is conducted. This device has a 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application NRY8xFuKRiSNnEN7SuapXg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

FN-LINK TECHNOLOGY LIMITED
No.8, Litong Road, Liuyang Economic & Technical Development Zone,
Changsha, Hunan,
China 		  Date of Grant: 07/12/2024

Application Dated: 07/12/2024
 
Attention: Jim Hu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6220T-IF
Name of Grantee:  FN-LINK TECHNOLOGY LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi+BT module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.03228  
CC ND 15E 5260.0  -  5320.0 0.03758  
CC ND 15E 5500.0  -  5700.0 0.037  
CC 15E 5745.0  -  5825.0 0.04899  

Power listed is conducted. This device has a 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: