FCC ID 2AATL-6233BUUB
WIFI/Bluetooth MODULE
by FN-LINK TECHNOLOGY LIMITED
Grantee Code: 2AATL Product Code: 6233BUUB
Latest application date: 2023-11-20
FCC ID Device Details
| FCC ID | 2AATL-6233BUUB |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AATL |
| Product Code | 6233BUUB |
| Applicant Business | FN-LINK TECHNOLOGY LIMITED 🇨🇳 |
| Related Domains |  fn-link.com |
| Equipment Class | WIFI/Bluetooth MODULE |
| Test Firm | Shenzhen Alpha Product Testing Co., LTD. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2023-11-20 |
| 2402-2480 MHz | Original Equipment | 2023-11-20 |
| 5745-5825 MHz | Original Equipment | 2023-11-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2023-11-20 | PDF 2.1 MB |
| User manual | Users Manual | 2023-11-20 | PDF 2.1 MB |
| Internal Photos | Internal Photos | 2023-11-20 | PDF 463.3 KB |
| External Photo | External Photos | 2023-11-20 | PDF 1.1 MB |
| External photos | External Photos | 2023-11-20 | PDF 1.1 MB |
| Label Location | ID Label/Location Info | 2023-11-20 | PDF 539.7 KB |
| Label and Location | ID Label/Location Info | 2023-11-20 | PDF 539.7 KB |
| label&label location | ID Label/Location Info | 2023-11-20 | PDF 539.7 KB |
| T Setup photo | Test Setup Photos | 2023-11-20 | PDF 239.5 KB |
| Test Setup Photos | Test Setup Photos | 2023-11-20 | PDF 239.5 KB |
| Antenna Specification | Test Report | 2023-11-20 | PDF 913.3 KB |
| Antenna Specifications | Test Report | 2023-11-20 | PDF 913.3 KB |
| FCC PART 15.247_EDR_1 | Test Report | 2023-11-20 | PDF 5.4 MB |
| FCC PART 15.247_EDR_2 | Test Report | 2023-11-20 | PDF 3.8 MB |
| FCC Report DFS | Test Report | 2023-11-20 | PDF 1,003 KB |
| FCCPART15.247 2.4GWIFI 1 | Test Report | 2023-11-20 | PDF 5 MB |
| FCCPART15.247 2.4GWIFI 2 | Test Report | 2023-11-20 | PDF 2.7 MB |
| FCCPART15.247 BLE | Test Report | 2023-11-20 | PDF 3.9 MB |
| FCCReportUNII5G 1 | Test Report | 2023-11-20 | PDF 4.9 MB |
| FCCReportUNII5G 2 | Test Report | 2023-11-20 | PDF 3.9 MB |
| 2.911 (d)(7)USAgentforServiceofProcessv1.2 | Attestation Statements | 2023-11-20 | PDF 133.1 KB |
| 2.911_(d)(5)(i) Certification Equipment Type v1.2 | Attestation Statements | 2023-11-20 | PDF 325.6 KB |
| 2.911_(d)(5)(i)CertificationEquipmentTypev1.2 | Attestation Statements | 2023-11-20 | PDF 325.6 KB |
| 2.911_(d)(5)(ii) Certificiation Applicant v1.3 | Attestation Statements | 2023-11-20 | PDF 311.4 KB |
| 2.911_(d)(5)(ii)CertificiationApplicantv1.2 | Attestation Statements | 2023-11-20 | PDF 311.4 KB |
| 2.911_(d)(7) US Agent for Service of Process v1.2 | Attestation Statements | 2023-11-20 | PDF 133.1 KB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2023-11-20 | PDF 11.4 KB |
| AgentAuthorizationRev1.0 | Cover Letter(s) | 2023-11-20 | PDF 11.4 KB |
| FCC Short_Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2023-11-20 | PDF 115.2 KB |
| FCCSoftwareConfigurationControlDeclarationRev1.1 | Cover Letter(s) | 2023-11-20 | PDF 114.6 KB |
| Letter of Authorization Rev 1.0 | Cover Letter(s) | 2023-11-20 | PDF 11.5 KB |
| Letter of Authorization Rev1.0 | Cover Letter(s) | 2023-11-20 | PDF 11.5 KB |
| LetterofAuthorizationRev1.0 | Cover Letter(s) | 2023-11-20 | PDF 11.5 KB |
| LongTermConfidentialityRequest | Cover Letter(s) | 2023-11-20 | PDF 115.2 KB |
| Long_Term_Confidentiality | Cover Letter(s) | 2023-11-20 | PDF 115.2 KB |
| Modular Approval Request | Cover Letter(s) | 2023-11-20 | PDF 152.5 KB |
| MPE | RF Exposure Info | 2023-11-20 | PDF 319.6 KB |
| Block Diagram Metadata only | Block Diagram | PDF 86.7 KB | |
| SCH Metadata only | Schematics | PDF 29.4 KB | |
| OP Metadata only | Operational Description | PDF 154.8 KB | |
| FCCSoftwareSecurityRequirementsforUNIIdevicesRev2.1 Metadata only | SDR Software/Security Inf | PDF 354 KB |
Application Information
| Application ID | pkOoo1Zp0QqZNg4zfhsU9A== |
|---|---|
| Final Action Date | 2023-11-20 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0022902761 |
| Model | 6233BUUB |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | WIFI/Bluetooth MODULE |
| Responsible Party | Jim Hu, Manager, jim@fn-link.com , +8613538178944 |
| Technical Contact | FN-LINK TECHNOLOGY LIMITED, jim@fn-link.com |
| Test Firm | Simple Guan, Shenzhen Alpha Product Testing Co., LTD., simple@a-lab.cn  , +86 755 29766001-810 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| pkOoo1Zp0QqZNg4zfhsU9A== | 2023-11-20 | Original Equipment |
| ifqInH5ceCi6vDCWmi5kwQ== | 2023-11-20 | Original Equipment |
| VAbj93twD6qLwEdcOliCKQ== | 2023-11-20 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application VAbj93twD6qLwEdcOliCKQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 11/20/2023 Application Dated: 11/20/2023 |
| FN-LINK TECHNOLOGY LIMITED |
| No.8, Litong Road, Liuyang Economic & |
| Technical Development Zone, |
| Changsha, Hunan, China |
| Attention: Jim Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AATL-6233BUUB |
| Name of Grantee: | FN-LINK TECHNOLOGY LIMITED |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WIFI/Bluetooth MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.04779 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.04606 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.048 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.04858 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application VAbj93twD6qLwEdcOliCKQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FN-LINK TECHNOLOGY LIMITED No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, China |
Date of Grant: 11/20/2023 Application Dated: 11/20/2023 |
| Attention: Jim Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AATL-6233BUUB |
| Name of Grantee: | FN-LINK TECHNOLOGY LIMITED |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WIFI/Bluetooth MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.04779 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.04606 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.048 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.04858 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 11/20/2023 Application Dated: 11/20/2023 |
| FN-LINK TECHNOLOGY LIMITED |
| No.8, Litong Road, Liuyang Economic & |
| Technical Development Zone, |
| Changsha, Hunan, China |
| Attention: Jim Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AATL-6233BUUB |
| Name of Grantee: | FN-LINK TECHNOLOGY LIMITED |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WIFI/Bluetooth MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application pkOoo1Zp0QqZNg4zfhsU9A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FN-LINK TECHNOLOGY LIMITED No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, China |
Date of Grant: 11/20/2023 Application Dated: 11/20/2023 |
| Attention: Jim Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AATL-6233BUUB |
| Name of Grantee: | FN-LINK TECHNOLOGY LIMITED |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WIFI/Bluetooth MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 11/20/2023 Application Dated: 11/20/2023 |
| FN-LINK TECHNOLOGY LIMITED |
| No.8, Litong Road, Liuyang Economic & |
| Technical Development Zone, |
| Changsha, Hunan, China |
| Attention: Jim Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AATL-6233BUUB |
| Name of Grantee: | FN-LINK TECHNOLOGY LIMITED |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI/Bluetooth MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00174 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.05834 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ifqInH5ceCi6vDCWmi5kwQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FN-LINK TECHNOLOGY LIMITED No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, China |
Date of Grant: 11/20/2023 Application Dated: 11/20/2023 |
| Attention: Jim Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AATL-6233BUUB |
| Name of Grantee: | FN-LINK TECHNOLOGY LIMITED |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI/Bluetooth MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00174 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.05834 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |