FCC ID 2AATL-6252B-UUB

WIFI/Bluetooth MODULE

by FN-LINK TECHNOLOGY LIMITED

Grantee Code: 2AATL   Product Code: 6252BUUB
Latest application date: 2024-04-15

FCC ID Device Details

FCC ID2AATL-6252B-UUB
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AATL
Product Code6252BUUB
Applicant BusinessFN-LINK TECHNOLOGY LIMITED 🇨🇳
Related Domains fn-link.com
Equipment ClassWIFI/Bluetooth MODULE
Test FirmShenzhen Alpha Product Testing Co., LTD.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2024-04-15
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-04-15
5745-5825 MHzOriginal Equipment2024-02-09
2412-2462 MHzOriginal Equipment2024-02-09
2402-2480 MHzOriginal Equipment2024-02-09

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2024-04-15PDF 2.6 MB
User MaunalUsers Manual2024-04-15PDF 2.6 MB
User manualUsers Manual2024-02-09PDF 2.6 MB
user manualUsers Manual2024-02-09PDF 2.6 MB
Internal PhotosInternal Photos2024-04-15PDF 205.5 KB
Internal photoInternal Photos2024-04-15PDF 205.5 KB
Internal photosInternal Photos2024-02-09PDF 205.5 KB
External photosExternal Photos2024-02-09PDF 825.8 KB
Label and locationID Label/Location Info2024-02-09PDF 279.4 KB
label and locationID Label/Location Info2024-02-09PDF 279.4 KB
test photoTest Setup Photos2024-04-15PDF 192.3 KB
test setup photoTest Setup Photos2024-02-09PDF 189.7 KB
2.4G wifi report 1Test Report2024-04-15PDF 5.5 MB
2.4G wifi report 2Test Report2024-04-15PDF 3.4 MB
FPC antennaTest Report2024-04-15PDF 771.8 KB
Rod antennaTest Report2024-04-15PDF 1.3 MB
test reportTest Report2024-04-15PDF 3.7 MB
ANTENNA SPECTest Report2024-02-09PDF 1.3 MB
Antenna specTest Report2024-02-09PDF 1.3 MB
Antenna specTest Report2024-02-09PDF 1.3 MB
Repor t2.4G WIFI 2Test Report2024-02-09PDF 4.9 MB
Report 2.4G WIFI 1Test Report2024-02-09PDF 5 MB
Report 2.4G WIFI 3Test Report2024-02-09PDF 2.8 MB
Report BLETest Report2024-02-09PDF 4.4 MB
Report EDR 1Test Report2024-02-09PDF 4.9 MB
Report EDR 2Test Report2024-02-09PDF 4.1 MB
Report UNII 5G 1Test Report2024-02-09PDF 4.9 MB
Report UNII 5G 2Test Report2024-02-09PDF 5 MB
Report UNII 5G 3Test Report2024-02-09PDF 4.9 MB
Report UNII 5G 4Test Report2024-02-09PDF 4.9 MB
Report UNII 5G 5Test Report2024-02-09PDF 5 MB
Report UNII 5G 6Test Report2024-02-09PDF 2.8 MB
Report_DFSTest Report2024-02-09PDF 946.6 KB
Report_EDR_1Test Report2024-02-09PDF 4.9 MB
Report_EDR_2Test Report2024-02-09PDF 4 MB
2.911d 5 i Certification Equipment TypeAttestation Statements2024-04-15PDF 325.6 KB
2.911d 5 ii Certificiation ApplicantAttestation Statements2024-04-15PDF 311.6 KB
US Agent for Service ProcessAttestation Statements2024-04-15PDF 169.6 KB
Certification ApplicantAttestation Statements2024-02-09PDF 311.7 KB
Certification Equipment TypeAttestation Statements2024-02-09PDF 325.6 KB
US agentAttestation Statements2024-02-09PDF 169.6 KB
US agent for service of processAttestation Statements2024-02-09PDF 169.6 KB
Agent AuthorizationCover Letter(s)2024-04-15PDF 11.5 KB
FCC Class II PC request letterCover Letter(s)2024-04-15PDF 651 KB
FCC Modular Approval RequestCover Letter(s)2024-04-15PDF 151.7 KB
FCC Software Configuration Control DeclarationCover Letter(s)2024-04-15PDF 114.6 KB
Agent AuthorizationCover Letter(s)2024-02-09PDF 11.4 KB
Confidentiality RequestCover Letter(s)2024-02-09PDF 115 KB
FCC Software Configuration Control DeclarationCover Letter(s)2024-02-09PDF 114.6 KB
Modular Approval RequestCover Letter(s)2024-02-09PDF 152.4 KB
MPE reportRF Exposure Info2024-04-15PDF 322.6 KB
RF exposureRF Exposure Info2024-02-09PDF 322.2 KB
RF exposure reportRF Exposure Info2024-02-09PDF 322.2 KB
Block diagram Metadata onlyBlock DiagramPDF 71.1 KB
Schematic Metadata onlySchematicsPDF 265.5 KB
Operation descriptions Metadata onlyOperational DescriptionPDF 156.8 KB
SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES Metadata onlySDR Software/Security Info.PDF 352 KB
SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES Metadata onlySDR Software/Security Info.PDF 354 KB

Application Information

Application IDLq+xrJHD0AUTbrSZYCe1cA==
Final Action Date2024-04-15
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0022902761
Model6252B-UUB
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWIFI/Bluetooth MODULE
Responsible PartyJim Hu, Manager, jim@fn-link.com , +8613538178944
Technical ContactFN-LINK TECHNOLOGY LIMITED, jim@fn-link.com
Test FirmReal Yak, Shenzhen Alpha Product Testing Co., LTD., e016@a-lab.cn , +86 755 29766001
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II permissive change for this filling. Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
Lq+xrJHD0AUTbrSZYCe1cA==2024-04-15Class II permissive change or modification of presently authorized equipment
648HVE4CqOGRQGH3yOH+4g==2024-04-15Class II permissive change or modification of presently authorized equipment
mPDDWm7ci6/iTbQJts+SBQ==2024-02-09Original Equipment
ameWcmQH5iFTca4M5t0jdw==2024-02-09Original Equipment
ZrL6QkIqUpvUkN6WKlcmTA==2024-02-09Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.006150015CCC
2402-2480 MHz0.0059615CCC
2412-2462 MHz0.1798915CCC, MO
5180-5240 MHz0.1202315ECC, MO
5260-5320 MHz0.1496215ECC, MO, ND
5500-5700 MHz0.1445415ECC, MO, ND
5725-5850 MHz0.1465515ECC, MO
5745-5825 MHz0.1465515ECC, MO

Grants

TCB Grant - Application ZrL6QkIqUpvUkN6WKlcmTA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 02/09/2024

Application Dated: 02/09/2024
FN-LINK TECHNOLOGY LIMITED
No.8, Litong Road, Liuyang Economic &
Technical Development Zone,
Changsha, Hunan,
China
 
Attention: Jim Hu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6252B-UUB
Name of Grantee:  FN-LINK TECHNOLOGY LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WIFI/Bluetooth MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00615  

Single Modular Approval. Output power listed is conducted power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ZrL6QkIqUpvUkN6WKlcmTA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

FN-LINK TECHNOLOGY LIMITED
No.8, Litong Road, Liuyang Economic & Technical Development Zone,
Changsha, Hunan,
China
  Date of Grant: 02/09/2024

Application Dated: 02/09/2024
 
Attention: Jim Hu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6252B-UUB
Name of Grantee:  FN-LINK TECHNOLOGY LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WIFI/Bluetooth MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00615  

Single Modular Approval. Output power listed is conducted power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application mPDDWm7ci6/iTbQJts+SBQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 02/09/2024

Application Dated: 02/09/2024
FN-LINK TECHNOLOGY LIMITED
No.8, Litong Road, Liuyang Economic &
Technical Development Zone,
Changsha, Hunan,
China
 
Attention: Jim Hu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6252B-UUB
Name of Grantee:  FN-LINK TECHNOLOGY LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIFI/Bluetooth MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.12023  
CC MO ND 15E 5260.0  -  5320.0 0.14962  
CC MO ND 15E 5500.0  -  5700.0 0.14454  
CC MO 15E 5745.0  -  5825.0 0.14655  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application mPDDWm7ci6/iTbQJts+SBQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

FN-LINK TECHNOLOGY LIMITED
No.8, Litong Road, Liuyang Economic & Technical Development Zone,
Changsha, Hunan,
China
  Date of Grant: 02/09/2024

Application Dated: 02/09/2024
 
Attention: Jim Hu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6252B-UUB
Name of Grantee:  FN-LINK TECHNOLOGY LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIFI/Bluetooth MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.12023  
CC MO ND 15E 5260.0  -  5320.0 0.14962  
CC MO ND 15E 5500.0  -  5700.0 0.14454  
CC MO 15E 5745.0  -  5825.0 0.14655  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application Lq+xrJHD0AUTbrSZYCe1cA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 04/15/2024

Application Dated: 04/15/2024
FN-LINK TECHNOLOGY LIMITED
No.8, Litong Road, Liuyang Economic &
Technical Development Zone,
Changsha, Hunan,
China
 
Attention: Jim Hu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6252B-UUB
Name of Grantee:  FN-LINK TECHNOLOGY LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIFI/Bluetooth MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.12023  
CC MO ND 15E 5260.0  -  5320.0 0.14962  
CC MO ND 15E 5500.0  -  5700.0 0.14454  
CC MO 15E 5725.0  -  5850.0 0.14655  

Class II permissive change for this filling. Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application Lq+xrJHD0AUTbrSZYCe1cA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

FN-LINK TECHNOLOGY LIMITED
No.8, Litong Road, Liuyang Economic & Technical Development Zone,
Changsha, Hunan,
China
  Date of Grant: 04/15/2024

Application Dated: 04/15/2024
 
Attention: Jim Hu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6252B-UUB
Name of Grantee:  FN-LINK TECHNOLOGY LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIFI/Bluetooth MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.12023  
CC MO ND 15E 5260.0  -  5320.0 0.14962  
CC MO ND 15E 5500.0  -  5700.0 0.14454  
CC MO 15E 5725.0  -  5850.0 0.14655  

Class II permissive change for this filling. Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application ameWcmQH5iFTca4M5t0jdw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 02/09/2024

Application Dated: 02/09/2024
FN-LINK TECHNOLOGY LIMITED
No.8, Litong Road, Liuyang Economic &
Technical Development Zone,
Changsha, Hunan,
China
 
Attention: Jim Hu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6252B-UUB
Name of Grantee:  FN-LINK TECHNOLOGY LIMITED
Equipment Class: Digital Transmission System
Notes: WIFI/Bluetooth MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00596  
CC MO 15C 2412.0  -  2462.0 0.17989  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ameWcmQH5iFTca4M5t0jdw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

FN-LINK TECHNOLOGY LIMITED
No.8, Litong Road, Liuyang Economic & Technical Development Zone,
Changsha, Hunan,
China
  Date of Grant: 02/09/2024

Application Dated: 02/09/2024
 
Attention: Jim Hu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6252B-UUB
Name of Grantee:  FN-LINK TECHNOLOGY LIMITED
Equipment Class: Digital Transmission System
Notes: WIFI/Bluetooth MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00596  
CC MO 15C 2412.0  -  2462.0 0.17989  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 648HVE4CqOGRQGH3yOH+4g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 04/15/2024

Application Dated: 04/15/2024
FN-LINK TECHNOLOGY LIMITED
No.8, Litong Road, Liuyang Economic &
Technical Development Zone,
Changsha, Hunan,
China
 
Attention: Jim Hu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6252B-UUB
Name of Grantee:  FN-LINK TECHNOLOGY LIMITED
Equipment Class: Digital Transmission System
Notes: WIFI/Bluetooth MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00596  
CC MO 15C 2412.0  -  2462.0 0.17989  

Class II permissive change for this filling. Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 648HVE4CqOGRQGH3yOH+4g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

FN-LINK TECHNOLOGY LIMITED
No.8, Litong Road, Liuyang Economic & Technical Development Zone,
Changsha, Hunan,
China
  Date of Grant: 04/15/2024

Application Dated: 04/15/2024
 
Attention: Jim Hu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6252B-UUB
Name of Grantee:  FN-LINK TECHNOLOGY LIMITED
Equipment Class: Digital Transmission System
Notes: WIFI/Bluetooth MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00596  
CC MO 15C 2412.0  -  2462.0 0.17989  

Class II permissive change for this filling. Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: