FCC ID 2AATL-6221B-UCC

6221B-UCC

by HUNAN FN-LINK TECHNOLOGY LIMITED

Grantee Code: 2AATL   Product Code: 6221BUCC
Latest application date: 2021-02-04

FCC ID Device Details

FCC ID2AATL-6221B-UCC
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AATL
Product Code6221BUCC
Applicant BusinessHUNAN FN-LINK TECHNOLOGY LIMITED 🇨🇳
Related Domains fn-link.com
Equipment Class6221B-UCC
Test FirmBlueAsia of Technical Services (Shenzhen)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzOriginal Equipment2021-02-04
2402-2480 MHzOriginal Equipment2021-02-04
2412-2462 MHzOriginal Equipment2021-02-04

Exhibits

DocumentTypeAvailableFile
LabelID Label/Location Info2021-02-04PDF 29.4 KB
Test reportTest Report2021-02-04PDF 4.2 MB
Test reportTest Report2021-02-04PDF 5.3 MB
Test report DFSTest Report2021-02-04PDF 1.1 MB
Test report part 1Test Report2021-02-04PDF 5.6 MB
Cover letterCover Letter(s)2021-02-04PDF 328.9 KB
RF ExposureRF Exposure Info2021-02-04PDF 104.6 KB

Application Information

Application IDmtcFDxbBhf9zvl7O745a4Q==
Final Action Date2021-02-04
Application PurposeOriginal Equipment
Applicant FRN0022902761
Model6221B-UCC
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device Description6221B-UCC
Responsible PartyWayne Zou, Manager, wayne@fn-link.com , +8613907493195
Test FirmEmen Li, BlueAsia of Technical Services (Shenzhen), emen.li@cblueasia.com , +86 18681508051
TCB EmailDariaL@compliancetesting.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power output listed is conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode, and to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
mtcFDxbBhf9zvl7O745a4Q==2021-02-04Original Equipment
kiSwI9TpcUlfDxN9SeWmeA==2021-02-04Original Equipment
gdlJUN/dGjDuTPNWWvYSEg==2021-02-04Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.015890015CCC
2402-2480 MHz0.008315CCC
2412-2462 MHz0.0252315CCC
5180-5240 MHz0.0253515ECC
5260-5320 MHz0.0315515ECC
5500-5700 MHz0.0269815ECC
5745-5825 MHz0.0154515ECC

Grants

TCB Grant - Application mtcFDxbBhf9zvl7O745a4Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
Date of Grant: 02/04/2021

Application Dated: 02/04/2021
HUNAN FN-LINK TECHNOLOGY LIMITED
No. 8, Litong Road,
Liuyang Economic Development Zone,
Liuyang,
China
 
Attention: Wayne Zou , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6221B-UCC
Name of Grantee:  HUNAN FN-LINK TECHNOLOGY LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 6221B-UCC
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.02535  
CC 15E 5260.0  -  5320.0 0.03155  
CC 15E 5500.0  -  5700.0 0.02698  
CC 15E 5745.0  -  5825.0 0.01545  

Single Modular Approval. Power output listed is conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode, and to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application mtcFDxbBhf9zvl7O745a4Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HUNAN FN-LINK TECHNOLOGY LIMITED
No. 8, Litong Road, Liuyang Economic Development Zone,
Liuyang,
China
  Date of Grant: 02/04/2021

Application Dated: 02/04/2021
 
Attention: Wayne Zou , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6221B-UCC
Name of Grantee:  HUNAN FN-LINK TECHNOLOGY LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 6221B-UCC
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.02535  
CC 15E 5260.0  -  5320.0 0.03155  
CC 15E 5500.0  -  5700.0 0.02698  
CC 15E 5745.0  -  5825.0 0.01545  

Single Modular Approval. Power output listed is conducted. This device has 20 MHz, 40 MHz and 80 MHz bandwidth mode, and to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application kiSwI9TpcUlfDxN9SeWmeA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
Date of Grant: 02/04/2021

Application Dated: 02/04/2021
HUNAN FN-LINK TECHNOLOGY LIMITED
No. 8, Litong Road,
Liuyang Economic Development Zone,
Liuyang,
China
 
Attention: Wayne Zou , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6221B-UCC
Name of Grantee:  HUNAN FN-LINK TECHNOLOGY LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 6221B-UCC
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01589  

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application kiSwI9TpcUlfDxN9SeWmeA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HUNAN FN-LINK TECHNOLOGY LIMITED
No. 8, Litong Road, Liuyang Economic Development Zone,
Liuyang,
China
  Date of Grant: 02/04/2021

Application Dated: 02/04/2021
 
Attention: Wayne Zou , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6221B-UCC
Name of Grantee:  HUNAN FN-LINK TECHNOLOGY LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 6221B-UCC
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01589  

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application gdlJUN/dGjDuTPNWWvYSEg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
Date of Grant: 02/04/2021

Application Dated: 02/04/2021
HUNAN FN-LINK TECHNOLOGY LIMITED
No. 8, Litong Road,
Liuyang Economic Development Zone,
Liuyang,
China
 
Attention: Wayne Zou , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6221B-UCC
Name of Grantee:  HUNAN FN-LINK TECHNOLOGY LIMITED
Equipment Class: Digital Transmission System
Notes: 6221B-UCC
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.02523  
CC 15C 2402.0  -  2480.0 0.0083  

Single Modular Approval. Power output listed is conducted. This device has 20 MHz and 40 MHz bandwidth mode, and to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application gdlJUN/dGjDuTPNWWvYSEg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

HUNAN FN-LINK TECHNOLOGY LIMITED
No. 8, Litong Road, Liuyang Economic Development Zone,
Liuyang,
China
  Date of Grant: 02/04/2021

Application Dated: 02/04/2021
 
Attention: Wayne Zou , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AATL-6221B-UCC
Name of Grantee:  HUNAN FN-LINK TECHNOLOGY LIMITED
Equipment Class: Digital Transmission System
Notes: 6221B-UCC
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.02523  
CC 15C 2402.0  -  2480.0 0.0083  

Single Modular Approval. Power output listed is conducted. This device has 20 MHz and 40 MHz bandwidth mode, and to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: