FCC ID 2AATLF89ESSM23
wifi module
by FN-LINK TECHNOLOGY LIMITED
Grantee Code: 2AATL Product Code: F89ESSM23
Latest application date: 2022-05-24
FCC ID Device Details
| FCC ID | 2AATLF89ESSM23 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AATL |
| Product Code | F89ESSM23 |
| Applicant Business | FN-LINK TECHNOLOGY LIMITED 🇨🇳 |
| Related Domains |  fn-link.com |
| Equipment Class | wifi module |
| Test Firm | Attestation of Global Compliance (Shenzhen) Co., L |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2022-05-24 |
| 2412-2462 MHz | Original Equipment | 2014-03-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2022-05-24 | PDF 2.3 MB |
| User Manual | Users Manual | 2014-03-26 | PDF 613 KB |
| Internal photos | Internal Photos | 2022-05-24 | PDF 134.8 KB |
| Internal Photos | Internal Photos | 2014-03-26 | PDF 496.8 KB |
| External Photo | External Photos | 2022-05-24 | PDF 1.3 MB |
| External Photos | External Photos | 2014-03-26 | PDF 834 KB |
| Label Location | ID Label/Location Info | 2022-05-24 | PDF 503.8 KB |
| FCC ID Label | ID Label/Location Info | 2014-03-26 | PDF 7 KB |
| FCC ID Label Location | ID Label/Location Info | 2014-03-26 | PDF 151.7 KB |
| Test Setup Photos | Test Setup Photos | 2022-05-24 | PDF 470.7 KB |
| Test setup photo | Test Setup Photos | 2022-05-24 | PDF 818.2 KB |
| Test Setup Photos | Test Setup Photos | 2014-03-26 | PDF 601.2 KB |
| Test Report | Test Report | 2022-05-24 | PDF 4.3 MB |
| Test Report for DTS | Test Report | 2014-03-26 | PDF 4.2 MB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2022-05-24 | PDF 9.1 KB |
| Declaration Channel Limitation | Cover Letter(s) | 2022-05-24 | PDF 32.5 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2022-05-24 | PDF 2.4 MB |
| Modular Approval Justification | Cover Letter(s) | 2022-05-24 | PDF 785.5 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2014-03-26 | PDF 58.8 KB |
| Declaration Letter for Ad HoC | Cover Letter(s) | 2014-03-26 | PDF 11 KB |
| Modular Approval Request Letter | Cover Letter(s) | 2014-03-26 | PDF 35.2 KB |
| POA | Cover Letter(s) | 2014-03-26 | PDF 23.7 KB |
| RF Exposure Info | RF Exposure Info | 2014-03-26 | PDF 191.5 KB |
| Block Metadata only | Block Diagram | PDF 113 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 219.2 KB | |
| SCH Metadata only | Schematics | PDF 55.5 KB | |
| Schematics Metadata only | Schematics | PDF 28.6 KB | |
| OP Metadata only | Operational Description | PDF 17 KB | |
| Operational Description Metadata only | Operational Description | PDF 235.7 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 87.3 KB |
Application Information
| Application ID | xQQn63oRDiT8UVf1wrfYjg== |
|---|---|
| Final Action Date | 2022-05-24 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0022902761 |
| Model | F89ESSM23 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | wifi module |
| Responsible Party | Jim Hu, Manager, jim@fn-link.com , +8613538178944 |
| Technical Contact | FN-LINK TECHNOLOGY LIMITED, jim@fn-link.com |
| Test Firm | Doris Li, Attestation of Global Compliance (Shenzhen) Co., L, dorisli@agc-cert.com  , +86-755-25234088 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Single Modular Approval. Output power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| xQQn63oRDiT8UVf1wrfYjg== | 2022-05-24 | Original Equipment |
| g6RtqU5CeQGsAw/wKRYjsA== | 2014-03-26 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application xQQn63oRDiT8UVf1wrfYjg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 05/24/2022 Application Dated: 05/24/2022 |
| FN-LINK TECHNOLOGY LIMITED |
| No.8, Litong Road, Liuyang Economic & |
| Technical Development Zone, |
| Changsha, Hunan, China |
| Attention: Jim Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AATLF89ESSM23 |
| Name of Grantee: | FN-LINK TECHNOLOGY LIMITED |
| Equipment Class: | Digital Transmission System |
| Notes: | wifi module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1361 |
| Limited Single Modular Approval. Output power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application xQQn63oRDiT8UVf1wrfYjg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
FN-LINK TECHNOLOGY LIMITED No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, China |
Date of Grant: 05/24/2022 Application Dated: 05/24/2022 |
| Attention: Jim Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AATLF89ESSM23 |
| Name of Grantee: | FN-LINK TECHNOLOGY LIMITED |
| Equipment Class: | Digital Transmission System |
| Notes: | wifi module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1361 |
| Limited Single Modular Approval. Output power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 03/26/2014 Application Dated: 03/26/2014 |
| HUNAN FN-LINK TECHNOLOGY LIMITED |
| No.8, Litong Road, Liuyang Economic & |
| Technical Development Zone, |
| Changsha, Hunan, China |
| Attention: Jim Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AATL-F89ESSM23 |
| Name of Grantee: | HUNAN FN-LINK TECHNOLOGY LIMITED |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0089 | |||
| 15C | 2422.0 - 2452.0 | 0.0057 |
| This modular approval is limited to installation in Host products that will provide final RF shielding. Output power listed is conducted. This OEM module is approved for use in products operating as portable transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz. |
EAS Grant - Application g6RtqU5CeQGsAw/wKRYjsA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
HUNAN FN-LINK TECHNOLOGY LIMITED No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, China |
Date of Grant: 03/26/2014 Application Dated: 03/26/2014 |
| Attention: Jim Hu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AATL-F89ESSM23 |
| Name of Grantee: | HUNAN FN-LINK TECHNOLOGY LIMITED |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0089 | |||
| 15C | 2422.0 - 2452.0 | 0.0057 |
| This modular approval is limited to installation in Host products that will provide final RF shielding. Output power listed is conducted. This OEM module is approved for use in products operating as portable transmitting device. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. Grantee shall provide installation and operating instructions for satisfying RF exposure requirements to OEM integrators and installers. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 802.11n, 20MHz and 40MHz. |
| Mail To: |