FCC ID 2AB2Q-A800SG-G1T

Smart LED Lamp

by LEEDARSON LIGHTING CO., LTD.

Grantee Code: 2AB2Q   Product Code: A800SGG1T
Latest application date: 2026-05-27

FCC ID Device Details

FCC ID2AB2Q-A800SG-G1T
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AB2Q
Product CodeA800SGG1T
Applicant BusinessLEEDARSON LIGHTING CO., LTD. 🇨🇳
Related Domains leedarson.com
Equipment ClassSmart LED Lamp
Test FirmShenzhen Most Technology Service Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2026-05-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-08-24
2402-2480 MHzOriginal Equipment2023-07-05

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2023-10-08PDF 1.7 MB
INT PHOTOInternal Photos2026-05-27PDF 1.9 MB
Internal PhotosInternal Photos2023-10-08PDF 250 KB
Internal PhotosInternal Photos2023-08-19PDF 363 KB
External PhotosExternal Photos2026-05-27PDF 2.4 MB
External PhotosExternal Photos2023-10-08PDF 427 KB
External PhotoExternal Photos2023-08-19PDF 639.9 KB
LabelID Label/Location Info2023-08-24PDF 480.5 KB
Label locationID Label/Location Info2023-08-24PDF 40.6 KB
Label and LocationID Label/Location Info2023-07-05PDF 40.6 KB
TestSetupPhotos-DTSTest Setup Photos2026-05-27PDF 393.2 KB
Test Setup photosTest Setup Photos2023-10-08PDF 204.2 KB
Test Setup PhotosTest Setup Photos2023-08-19PDF 89.8 KB
AntennaTest Report2026-05-27PDF 1,022.8 KB
FCC ID_R_BLE_ed2Test Report2026-05-27PDF 1.1 MB
FCCIDTestreport (BLE) 12CFA1960WRGB01Test Report2023-08-24PDF 1 MB
FCCIDTestreport-2.4WLAN 12CFA1960WRGB01Test Report2023-08-24PDF 1.1 MB
ANT REPORTTest Report2023-07-05PDF 1,022.8 KB
FCC ID Test report_(BLE)Test Report2023-07-05PDF 3.3 MB
FCCIDTestreport-2.4WLAN1Test Report2023-07-05PDF 2 MB
FCCIDTestreport-2.4WLAN2Test Report2023-07-05PDF 3 MB
2.911_(d)(5)(i) Certificiation Applicant v1.3Attestation Statements2026-05-27PDF 108.6 KB
2.911_(d)(5)(ii) Certificiation Applicant v1.3Attestation Statements2026-05-27PDF 138.7 KB
2.911_(d)(7) US AGENTAttestation Statements2026-05-27PDF 168.8 KB
2.911 (d)(5)(i)CertificationEquipmentTypev1.2Attestation Statements2023-08-24PDF 108.6 KB
2.911 (d)(5)(ii)CertificiationApplicantv1.2Attestation Statements2023-08-24PDF 138.7 KB
2.911_(d)(7) US Agent for Service of Process v1.2Attestation Statements2023-08-24PDF 134.7 KB
FCC Agent for service Attestation from Agent-New Metadata onlyCover Letter(s)2023-08-24PDF 134.7 KB
2.911 (d)(5)(ii)CertificiationApplicantv1.2Attestation Statements2023-07-05PDF 104.5 KB
FCC Agent for service Attestation from Agent-New Metadata onlyCover Letter(s)2023-07-05PDF 100.6 KB
US agent for service processAttestation Statements2023-07-05PDF 100.6 KB
AgentAuthorizationRev1.0Cover Letter(s)2026-05-27PDF 155.7 KB
FCC-Class-II-PC-request-letter-Rev1-1Cover Letter(s)2026-05-27PDF 216.1 KB
Model DifferenceCover Letter(s)2026-05-27PDF 109.6 KB
AgentAuthorizationRev1.0Cover Letter(s)2023-08-24PDF 121 KB
FCC Class II PC request letter Rev1.1Cover Letter(s)2023-08-24PDF 216.4 KB
FCC Short_Long Term Confidentiality Request Rev4.1Cover Letter(s)2023-08-24PDF 114.8 KB
Agent Authorization Rev 1.0Cover Letter(s)2023-07-05PDF 86.9 KB
FCC Short_Long Term Confidentiality Request Rev4.1Cover Letter(s)2023-07-05PDF 81.1 KB
Model DifferenceCover Letter(s)2023-07-05PDF 109.6 KB
MPERF Exposure Info2026-05-27PDF 284.2 KB
RF exposureRF Exposure Info2023-08-24PDF 283.9 KB
RF ExposureRF Exposure Info2023-07-05PDF 283.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 138.7 KB
SCH Metadata onlySchematicsPDF 143.4 KB
SCH Metadata onlySchematicsPDF 140.8 KB
OP Metadata onlyOperational DescriptionPDF 93.8 KB

Application Information

Application IDiLv/QOPlxZxr/MDo7c9q9A==
Final Action Date2026-05-27
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0023443971
ModelA800SG-G1T
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionSmart LED Lamp
Responsible PartyVick Zhang, cert@leedarson.com , (86) 592-3699897
Technical ContactLEEDARSON LIGHTING CO., LTD., cert@leedarson.com
Non-Technical ContactJoe Chen, LEEDARSON AMERICA INC., THD-BIZ@leedarson.com
Test FirmSunny Deng, Shenzhen Most Technology Service Co., Ltd., sunny.deng@szmost.com , 0755-26980487
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Modular EquipmentDoes not apply
Composite DeviceNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
iLv/QOPlxZxr/MDo7c9q9A==2026-05-27Class II permissive change or modification of presently authorized equipment
/DN0exwetQwy2zLfkqnE3w==2023-08-24Class II permissive change or modification of presently authorized equipment
L8pWlBtjODNtaYCzE89Fxw==2023-07-05Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.008515C
2412-2462 MHz0.11415C

Grants

TCB Grant - Application L8pWlBtjODNtaYCzE89Fxw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 07/05/2023

Application Dated: 07/05/2023
LEEDARSON LIGHTING CO., LTD.
Xingda Road, Xingtai Industrial Zone,
Changtai County,
Zhangzhou, Fujian,
China
 
Attention: Vick Zhang , safety engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AB2Q-A800SG-G1T
Name of Grantee:  LEEDARSON LIGHTING CO., LTD.
Equipment Class: Digital Transmission System
Notes: Smart LED Lamp
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0085  
15C 2412.0  -  2462.0 0.114  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

EAS Grant - Application L8pWlBtjODNtaYCzE89Fxw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LEEDARSON LIGHTING CO., LTD.
Xingda Road, Xingtai Industrial Zone, Changtai County,
Zhangzhou, Fujian,
China
  Date of Grant: 07/05/2023

Application Dated: 07/05/2023
 
Attention: Vick Zhang , safety engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AB2Q-A800SG-G1T
Name of Grantee:  LEEDARSON LIGHTING CO., LTD.
Equipment Class: Digital Transmission System
Notes: Smart LED Lamp
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0085  
15C 2412.0  -  2462.0 0.114  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.



TCB Grant - Application iLv/QOPlxZxr/MDo7c9q9A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/27/2026

Application Dated: 05/27/2026
LEEDARSON LIGHTING CO., LTD.
Xingda Road, Xingtai Industrial Zone,
Changtai County,
Zhangzhou, Fujian,
China
 
Attention: Vick Zhang , safety engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AB2Q-A800SG-G1T
Name of Grantee:  LEEDARSON LIGHTING CO., LTD.
Equipment Class: Digital Transmission System
Notes: Smart LED Lamp
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0085  
15C 2412.0  -  2462.0 0.114  

Class II permissive change for this filling. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

TCB Grant - Application /DN0exwetQwy2zLfkqnE3w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 08/24/2023

Application Dated: 08/24/2023
LEEDARSON LIGHTING CO., LTD.
Xingda Road, Xingtai Industrial Zone,
Changtai County,
Zhangzhou, Fujian,
China
 
Attention: Vick Zhang , safety engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AB2Q-A800SG-G1T
Name of Grantee:  LEEDARSON LIGHTING CO., LTD.
Equipment Class: Digital Transmission System
Notes: Smart LED Lamp
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0085  
15C 2412.0  -  2462.0 0.114  

Class II permissive change for this filling. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

EAS Grant - Application /DN0exwetQwy2zLfkqnE3w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LEEDARSON LIGHTING CO., LTD.
Xingda Road, Xingtai Industrial Zone, Changtai County,
Zhangzhou, Fujian,
China
  Date of Grant: 08/24/2023

Application Dated: 08/24/2023
 
Attention: Vick Zhang , safety engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AB2Q-A800SG-G1T
Name of Grantee:  LEEDARSON LIGHTING CO., LTD.
Equipment Class: Digital Transmission System
Notes: Smart LED Lamp
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0085  
15C 2412.0  -  2462.0 0.114  

Class II permissive change for this filling. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.



Mail To: