FCC ID 2AB6X5269A

Bluetooth Audio Receiver

by Electronica Integral de Sonido, S.A.

Grantee Code: 2AB6X   Product Code: 5269A
Latest application date: 2016-02-03

Device Images

FCC ID Device Details

FCC ID2AB6X5269A
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AB6X
Product Code5269A
Applicant BusinessElectronica Integral de Sonido, S.A. 🇪🇸
Related Domains eissound.com
Equipment ClassBluetooth Audio Receiver
Test FirmShenzhen BALUN Technology Co.,Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2016-02-03
2402-2480 MHzOriginal Equipment2016-02-03

Exhibits

DocumentTypeAvailableFile
Users Manual 1Users Manual2016-02-03PDF 3.5 MB
Users Manual 2Users Manual2016-02-03PDF 4 MB
Users Manual 3Users Manual2016-02-03PDF 3.9 MB
Users Manual 4Users Manual2016-02-03PDF 4.9 MB
Users Manual 5Users Manual2016-02-03PDF 3.9 MB
Users Manual 6Users Manual2016-02-03PDF 3.9 MB
Users Manual 7Users Manual2016-02-03PDF 4.6 MB
Users Manual 8Users Manual2016-02-03PDF 1.6 MB
Internal PhotosInternal Photos2016-02-03PDF 4 MB
External PhotosExternal Photos2016-02-03PDF 394.6 KB
Label LocationID Label/Location Info2016-02-03PDF 84.6 KB
Test Setup Photos DSS & DTSTest Setup Photos2016-02-03PDF 506.1 KB
Test Report DSS DTSTest Report2016-02-03PDF 3.8 MB
Authorization LetterCover Letter(s)2016-02-03PDF 35.1 KB
Confidentiality Request LetterCover Letter(s)2016-02-03PDF 14.5 KB
RF Exposure Evaluation MobileRF Exposure Info2016-02-03PDF 122.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 91.5 KB
Circuit Diagram Metadata onlySchematicsPDF 332 KB
Operational Description Metadata onlyOperational DescriptionPDF 230.6 KB

Application Information

Application IDtuhGqMZEyrr6UvMyR8UYFQ==
Final Action Date2016-02-03
Application PurposeOriginal Equipment
Applicant FRN0023508062
Model5269A
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionBluetooth Audio Receiver
Responsible PartyLuis Abos, R&D; Manager, labosl@eissound.com , +34976465550
Test FirmXuewen Wu, Shenzhen BALUN Technology Co.,Ltd., xuewen.wu@baluntek.com , 86-755-66833404
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
tuhGqMZEyrr6UvMyR8UYFQ==2016-02-03Original Equipment
jRCjNsm3f1RculOpIKz83Q==2016-02-03Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.002820015C
2402-2480 MHz0.003210015C

Grants

TCB Grant - Application tuhGqMZEyrr6UvMyR8UYFQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 02/03/2016

Application Dated: 02/03/2016
Electronica Integral de Sonido, S.A.
Pol. Malpica c/F Oeste Grupo Quejido, 87-88
Zaragoza, 50016
Spain
 
Attention: Luis Abos , R&D Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AB6X5269A
Name of Grantee:  Electronica Integral de Sonido, S.A.
Equipment Class: Digital Transmission System
Notes: Bluetooth Audio Receiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.00321  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application tuhGqMZEyrr6UvMyR8UYFQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Electronica Integral de Sonido, S.A.
Pol. Malpica c/F Oeste Grupo Quejido, 87-88
Zaragoza, 50016
Spain
  Date of Grant: 02/03/2016

Application Dated: 02/03/2016
 
Attention: Luis Abos , R&D Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AB6X5269A
Name of Grantee:  Electronica Integral de Sonido, S.A.
Equipment Class: Digital Transmission System
Notes: Bluetooth Audio Receiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.00321  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application jRCjNsm3f1RculOpIKz83Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 02/03/2016

Application Dated: 02/03/2016
Electronica Integral de Sonido, S.A.
Pol. Malpica c/F Oeste Grupo Quejido, 87-88
Zaragoza, 50016
Spain
 
Attention: Luis Abos , R&D Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AB6X5269A
Name of Grantee:  Electronica Integral de Sonido, S.A.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth Audio Receiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.00282  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application jRCjNsm3f1RculOpIKz83Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Electronica Integral de Sonido, S.A.
Pol. Malpica c/F Oeste Grupo Quejido, 87-88
Zaragoza, 50016
Spain
  Date of Grant: 02/03/2016

Application Dated: 02/03/2016
 
Attention: Luis Abos , R&D Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AB6X5269A
Name of Grantee:  Electronica Integral de Sonido, S.A.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth Audio Receiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.00282  

Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: