FCC ID 2AB76NC1000C1
Mesh Network Module
by NEOCORTEC A/S
Grantee Code: 2AB76 Product Code: NC1000C1
Latest application date: 2021-04-26
FCC ID Device Details
| FCC ID | 2AB76NC1000C1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AB76 |
| Product Code | NC1000C1 |
| Applicant Business | NEOCORTEC A/S 🇩🇰 |
| Related Domains |  neocortec.com |
| Equipment Class | Mesh Network Module |
| Test Firm | TUEV NORD Hochfrequenztechnik GmbH & Co. KG |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.6-927.4 MHz | Class II permissive change or modification of presently authorized equipment | 2021-04-26 |
| 902.6-927.4 MHz | Original Equipment | 2020-01-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2021-10-23 | PDF 2.8 MB |
| user Manual | Users Manual | 2020-07-13 | PDF 1.8 MB |
| int photos | Internal Photos | 2021-10-23 | PDF 98.7 KB |
| int photos | Internal Photos | 2020-07-13 | PDF 287.2 KB |
| ext photos | External Photos | 2021-10-23 | PDF 143.7 KB |
| Ext photos | External Photos | 2020-07-13 | PDF 738.1 KB |
| label and location | ID Label/Location Info | 2021-04-26 | PDF 243.7 KB |
| label and location | ID Label/Location Info | 2020-01-16 | PDF 73.2 KB |
| test setup photos | Test Setup Photos | 2021-10-23 | PDF 549.2 KB |
| Test Setup Photos | Test Setup Photos | 2020-07-13 | PDF 748.4 KB |
| Test report | Test Report | 2021-04-26 | PDF 1.7 MB |
| Test results | Test Report | 2021-04-26 | PDF 2.3 MB |
| Test Report | Test Report | 2020-01-16 | PDF 2 MB |
| C2 Letter | Cover Letter(s) | 2021-04-26 | PDF 800.6 KB |
| LTC Request | Cover Letter(s) | 2021-04-26 | PDF 206.4 KB |
| PoA | Cover Letter(s) | 2021-04-26 | PDF 178.9 KB |
| STC request | Cover Letter(s) | 2021-04-26 | PDF 206.8 KB |
| LTC request | Cover Letter(s) | 2020-01-16 | PDF 681.1 KB |
| Limited Channel Declaration | Cover Letter(s) | 2020-01-16 | PDF 522.6 KB |
| Request MOdular approval | Cover Letter(s) | 2020-01-16 | PDF 1.1 MB |
| STC Request | Cover Letter(s) | 2020-01-16 | PDF 704 KB |
| RF Expsoure | RF Exposure Info | 2020-01-16 | PDF 120.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 29.8 KB | |
| block Diagram_description Metadata only | Block Diagram | PDF 67.5 KB | |
| block diagram Metadata only | Block Diagram | PDF 30.5 KB | |
| Schematics Metadata only | Schematics | PDF 176.4 KB | |
| schematics Metadata only | Schematics | PDF 36.7 KB | |
| Chip data sheet Metadata only | Operational Description | PDF 3.5 MB | |
| operational description Metadata only | Operational Description | PDF 109.9 KB | |
| operational description_antenna datat sheet Metadata only | Operational Description | PDF 191 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 36.9 KB | |
| Parts list Metadata only | Parts List/Tune Up Info | PDF 25.2 KB |
Application Information
| Application ID | 4W2X5jFvDYL6VxbTakLKLQ== |
|---|---|
| Final Action Date | 2021-04-26 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0023528383 |
| Model | NC1000C1 |
| Frequency Range | 902.6-927.4 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Mesh Network Module |
| Responsible Party | Thomas S Halkier, CEO, tsh@neocortec.com , +45 20755038 |
| Agent | Marc Marc Marc, Teleconformity, mark.koop@teleconformity.com  , 0031-534785267 |
| Test Firm | Anup Shrestha, TUEV NORD Hochfrequenztechnik GmbH & Co. KG, hf@tuev-nord.de  , +49 221 / 88889515 |
| TCB Email | Knoerig.Klaus@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 10/23/2021 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power is maximum peak conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Class II Permissive Change: Antenna trace design added. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the ocumentation to the system integrator on restrictions of use, for continuing compliance of the module. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 4W2X5jFvDYL6VxbTakLKLQ== | 2021-04-26 | Class II permissive change or modification of presently authorized equipment |
| 8Ta4fVG0eGJQ1m2XJkhY9A== | 2020-01-16 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.6-927.4 MHz | 0.0120000 | 15C |
Grants
TCB Grant - Application 8Ta4fVG0eGJQ1m2XJkhY9A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 01/16/2020 Application Dated: 01/15/2020 |
| NEOCORTEC A/S |
| Nannasgade 28, 2. sal |
| Copenhagen N, 2200 Denmark |
| Attention: Thomas Halkier , CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AB76NC1000C1 |
| Name of Grantee: | NEOCORTEC A/S |
| Equipment Class: | Digital Transmission System |
| Notes: | Mesh Network Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.6 - 927.4 | 0.012 |
| Output power is maximum peak conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
EAS Grant - Application 8Ta4fVG0eGJQ1m2XJkhY9A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
NEOCORTEC A/S Nannasgade 28, 2. sal Copenhagen N, 2200 Denmark |
Date of Grant: 01/16/2020 Application Dated: 01/15/2020 |
| Attention: Thomas Halkier , CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AB76NC1000C1 |
| Name of Grantee: | NEOCORTEC A/S |
| Equipment Class: | Digital Transmission System |
| Notes: | Mesh Network Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.6 - 927.4 | 0.012 |
| Output power is maximum peak conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 04/26/2021 Application Dated: 04/26/2021 |
| NEOCORTEC A/S |
| Nannasgade 28, 2. sal |
| Copenhagen N, 2200 Denmark |
| Attention: Thomas Halkier , CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AB76NC1000C1 |
| Name of Grantee: | NEOCORTEC A/S |
| Equipment Class: | Digital Transmission System |
| Notes: | Mesh Network Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.6 - 927.4 | 0.012 |
| Output power is maximum peak conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Class II Permissive Change: Antenna trace design added. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the ocumentation to the system integrator on restrictions of use, for continuing compliance of the module. |
EAS Grant - Application 4W2X5jFvDYL6VxbTakLKLQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
NEOCORTEC A/S Nannasgade 28, 2. sal Copenhagen N, 2200 Denmark |
Date of Grant: 04/26/2021 Application Dated: 04/26/2021 |
| Attention: Thomas Halkier , CEO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AB76NC1000C1 |
| Name of Grantee: | NEOCORTEC A/S |
| Equipment Class: | Digital Transmission System |
| Notes: | Mesh Network Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.6 - 927.4 | 0.012 |
| Output power is maximum peak conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Class II Permissive Change: Antenna trace design added. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the ocumentation to the system integrator on restrictions of use, for continuing compliance of the module. |
| Mail To: |