FCC ID 2AB76NC2400C1

NEOCORTEC Wireless Module

by NEOCORTEC A/S

Grantee Code: 2AB76   Product Code: NC2400C1
Latest application date: 2021-04-26

Device Images

FCC ID Device Details

FCC ID2AB76NC2400C1
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AB76
Product CodeNC2400C1
Applicant BusinessNEOCORTEC A/S 🇩🇰
Related Domains neocortec.com
Equipment ClassNEOCORTEC Wireless Module
Test FirmTUEV NORD Hochfrequenztechnik GmbH & Co. KG

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2401-2482 MHzClass II permissive change or modification of presently authorized equipment2021-04-26
2401-2482 MHzOriginal Equipment2016-05-20

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2021-10-23PDF 1.2 MB
user manual addendumUsers Manual2021-10-23PDF 142.9 KB
Integration ManualUsers Manual2016-11-16PDF 529.2 KB
ManualUsers Manual2016-11-16PDF 2.5 MB
Users ManualUsers Manual2016-11-16PDF 4.6 MB
int photosInternal Photos2021-10-23PDF 103.5 KB
Internal PhotosInternal Photos2016-11-16PDF 1.6 MB
ext photosExternal Photos2021-10-23PDF 206.8 KB
External PhotosExternal Photos2016-11-16PDF 2.1 MB
label and locationID Label/Location Info2021-04-26PDF 70.5 KB
LabelID Label/Location Info2016-05-20PDF 803.8 KB
test setup photosTest Setup Photos2021-10-23PDF 586.9 KB
Test Setup PhotosTest Setup Photos2016-11-16PDF 745.5 KB
Annex to Test reportTest Report2021-04-26PDF 2.5 MB
Test ReportTest Report2021-04-26PDF 2 MB
Test ReportTest Report2016-05-20PDF 1.3 MB
C2 LetterCover Letter(s)2021-04-26PDF 781.1 KB
LTC RequestCover Letter(s)2021-04-26PDF 206.1 KB
PoACover Letter(s)2021-04-26PDF 175.8 KB
STC requestCover Letter(s)2021-04-26PDF 777.8 KB
Antenna RequirementCover Letter(s)2016-05-20PDF 549.7 KB
Authorization LetterCover Letter(s)2016-05-20PDF 137.2 KB
FCC Modular approvalCover Letter(s)2016-05-20PDF 665.8 KB
Long term confidentiality requestCover Letter(s)2016-05-20PDF 404.1 KB
Short term confidentiality requestCover Letter(s)2016-05-20PDF 430.3 KB
RF exposureRF Exposure Info2021-04-26PDF 87.5 KB
RF Exposure ReportRF Exposure Info2016-05-20PDF 58.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 29.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 30.8 KB
Schematics Metadata onlySchematicsPDF 176.4 KB
Schematics Metadata onlySchematicsPDF 35.8 KB
Operational Description Metadata onlyOperational DescriptionPDF 62.7 KB
operational description Metadata onlyOperational DescriptionPDF 109.9 KB
BOM parts Metadata onlyParts List/Tune Up InfoPDF 25.1 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 36.9 KB

Application Information

Application IDMKasOPqKt63LWTw8wlTwSA==
Final Action Date2021-04-26
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0023528383
ModelNC2400C1
Frequency Range2401-2482 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionNEOCORTEC Wireless Module
Responsible PartyThomas S Halkier, CEO, tsh@neocortec.com , +45 20755038
AgentMarc Marc Marc, Teleconformity, mark.koop@teleconformity.com , +31534785267
Test FirmAnup Shrestha, TUEV NORD Hochfrequenztechnik GmbH & Co. KG, hf@tuev-nord.de , +49 221 / 88889515
TCB EmailKnoerig.Klaus@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date10/23/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Antenna trace design added. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module.

Applications

Application IDDatePurpose
MKasOPqKt63LWTw8wlTwSA==2021-04-26Class II permissive change or modification of presently authorized equipment
ob4BsrG1Vx0SnbFc6ekNGA==2016-05-20Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2401-2482 MHz0.001600015C20

Grants

TCB Grant - Application ob4BsrG1Vx0SnbFc6ekNGA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/20/2016

Application Dated: 05/20/2016
NEOCORTEC A/S
Nannasgade 28, 2. sal
Copenhagen N, 2200
Denmark
 
Attention: Thomas Halkier , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AB76NC2400C1
Name of Grantee:  NEOCORTEC A/S
Equipment Class: Digital Transmission System
Notes: NEOCORTEC Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 15C 2401.0  -  2482.0 0.0016  

Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

EAS Grant - Application ob4BsrG1Vx0SnbFc6ekNGA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

NEOCORTEC A/S
Nannasgade 28, 2. sal
Copenhagen N, 2200
Denmark
  Date of Grant: 05/20/2016

Application Dated: 05/20/2016
 
Attention: Thomas Halkier , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AB76NC2400C1
Name of Grantee:  NEOCORTEC A/S
Equipment Class: Digital Transmission System
Notes: NEOCORTEC Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 15C 2401.0  -  2482.0 0.0016  

Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

TCB Grant - Application MKasOPqKt63LWTw8wlTwSA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 04/26/2021

Application Dated: 04/26/2021
NEOCORTEC A/S
Nannasgade 28, 2. sal
Copenhagen N, 2200
Denmark
 
Attention: Thomas Halkier , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AB76NC2400C1
Name of Grantee:  NEOCORTEC A/S
Equipment Class: Digital Transmission System
Notes: NEOCORTEC Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 15C 2401.0  -  2482.0 0.0016  

Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Antenna trace design added. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

EAS Grant - Application MKasOPqKt63LWTw8wlTwSA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

NEOCORTEC A/S
Nannasgade 28, 2. sal
Copenhagen N, 2200
Denmark
  Date of Grant: 04/26/2021

Application Dated: 04/26/2021
 
Attention: Thomas Halkier , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AB76NC2400C1
Name of Grantee:  NEOCORTEC A/S
Equipment Class: Digital Transmission System
Notes: NEOCORTEC Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 15C 2401.0  -  2482.0 0.0016  

Power Output listed is Conducted. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Antenna trace design added. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

Mail To: