FCC ID 2ABA2SFM20R4
Sigfox module
by WISOL CO., LTD
Grantee Code: 2ABA2 Product Code: SFM20R4
Latest application date: 2017-07-24
FCC ID Device Details
| FCC ID | 2ABA2SFM20R4 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ABA2 |
| Product Code | SFM20R4 |
| Applicant Business | WISOL CO., LTD 🇰🇷 |
| Related Domains |  wisol.co.kr |
| Equipment Class | Sigfox module |
| Test Firm | HCT Co., LTD |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2017-07-24 |
| 920.138-922.663 MHz | Original Equipment | 2017-07-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2018-01-15 | PDF 145.6 KB |
| Internal Photos | Internal Photos | 2018-01-15 | PDF 172.8 KB |
| External Photos | External Photos | 2018-01-15 | PDF 1.6 MB |
| ID Label and Location Info | ID Label/Location Info | 2017-07-24 | PDF 249.5 KB |
| Test Setup Photos | Test Setup Photos | 2018-01-15 | PDF 3.2 MB |
| RF Test Report | Test Report | 2017-07-24 | PDF 4.6 MB |
| RF Test Report - BLE | Test Report | 2017-07-24 | PDF 5 MB |
| RF Test Report - WiFi | Test Report | 2017-07-24 | PDF 5.4 MB |
| Confidential Request Letter | Cover Letter(s) | 2017-07-24 | PDF 54.5 KB |
| Declaration letter for no non-US channel operation | Cover Letter(s) | 2017-07-24 | PDF 119.1 KB |
| Modular Declaration Letter | Cover Letter(s) | 2017-07-24 | PDF 57 KB |
| RF Exposure Info | RF Exposure Info | 2017-07-24 | PDF 473.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 162 KB | |
| Schematics Metadata only | Schematics | PDF 156.5 KB | |
| OP - Antenna Metadata only | Operational Description | PDF 1.5 MB | |
| OP - Antenna Spec Metadata only | Operational Description | PDF 689.2 KB | |
| Operational Description Metadata only | Operational Description | PDF 1.1 MB |
Application Information
| Application ID | mxSgtklKlQ5xIHTGyQpERg== |
|---|---|
| Final Action Date | 2017-07-24 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0023101637 |
| Model | SFM20R4 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Sigfox module |
| Responsible Party | JONGJIN KIM, Deputy General Manager, jjkim@wisol.co.kr , +82-70-7873-2903 |
| Test Firm | Sang Lee, HCT Co., LTD, sjlee@HCT.co.kr  , 82-31-645-6420 |
| TCB Email | tcb@hctamerica.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 01/15/2018 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output is conducted. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no access to the antennas/connectors and has no manual instructions to remove or install this module. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| mxSgtklKlQ5xIHTGyQpERg== | 2017-07-24 | Original Equipment |
| TnU61KH8BeElAaRzyw0qQw== | 2017-07-24 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application TnU61KH8BeElAaRzyw0qQw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131 |
Date of Grant: 07/24/2017 Application Dated: 07/24/2017 |
| WISOL CO., LTD |
| 531-7, Gajang-ro |
| Gyeonggi-do |
| Osan-si, 18103 South Korea |
| Attention: JONGJIN KIM , Deputy General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABA2SFM20R4 |
| Name of Grantee: | WISOL CO., LTD |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Sigfox module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 920.1375 - 922.6625 | 0.166 |
| Power output is conducted. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no access to the antennas/connectors and has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application TnU61KH8BeElAaRzyw0qQw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
WISOL CO., LTD 531-7, Gajang-ro Gyeonggi-do Osan-si, 18103 South Korea |
Date of Grant: 07/24/2017 Application Dated: 07/24/2017 |
| Attention: JONGJIN KIM , Deputy General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABA2SFM20R4 |
| Name of Grantee: | WISOL CO., LTD |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Sigfox module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 920.1375 - 922.6625 | 0.166 |
| Power output is conducted. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no access to the antennas/connectors and has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
HCT America LLC 1726 Ringwood Avenue San Jose, CA 95131 |
Date of Grant: 07/24/2017 Application Dated: 07/24/2017 |
| WISOL CO., LTD |
| 531-7, Gajang-ro |
| Gyeonggi-do |
| Osan-si, 18103 South Korea |
| Attention: JONGJIN KIM , Deputy General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABA2SFM20R4 |
| Name of Grantee: | WISOL CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Sigfox module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0024 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.137 |
| Power output is conducted. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no access to the antennas/connectors and has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application mxSgtklKlQ5xIHTGyQpERg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
WISOL CO., LTD 531-7, Gajang-ro Gyeonggi-do Osan-si, 18103 South Korea |
Date of Grant: 07/24/2017 Application Dated: 07/24/2017 |
| Attention: JONGJIN KIM , Deputy General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABA2SFM20R4 |
| Name of Grantee: | WISOL CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Sigfox module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0024 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.137 |
| Power output is conducted. This device is to be used only for mobile and fixed application. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. The use of a different trace layout other than approved requires a Class II Permissive Change or a New Grant as appropriate. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no access to the antennas/connectors and has no manual instructions to remove or install this module. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |