FCC ID 2ABC5-AP6611S
Wi-Fi/Bluetooth Module
by SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.
Grantee Code: 2ABC5 Product Code: AP6611S
Latest application date: 2024-11-14
FCC ID Device Details
| FCC ID | 2ABC5-AP6611S |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ABC5 |
| Product Code | AP6611S |
| Applicant Business | SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. 🇨🇳 |
| Related Domains |  elclcd.com |
| Equipment Class | Wi-Fi/Bluetooth Module |
| Test Firm | Shenzhen EU Testing Laboratory Limited |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-11-14 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-11-14 |
| 5955-7115 MHz | Class II permissive change or modification of presently authorized equipment | 2024-11-14 |
| 5160-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2024-11-14 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: ZQ6-AP6611S Grant Date: 05/22/2024 | 2024-10-30 |
| 5955-7115 MHz | Change in identification of presently authorized equipment. Original FCC ID: ZQ6-AP6611S Grant Date: 05/22/2024 | 2024-10-30 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: ZQ6-AP6611S Grant Date: 05/22/2024 | 2024-10-30 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: ZQ6-AP6611S Grant Date: 05/22/2024 | 2024-10-30 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2024-10-30 | PDF 3.1 MB |
| External photos | External Photos | 2024-11-14 | PDF 2.2 MB |
| External photos | External Photos | 2024-10-30 | PDF 2.2 MB |
| Label and label location | ID Label/Location Info | 2024-10-30 | PDF 95.7 KB |
| Test setup photos | Test Setup Photos | 2024-11-14 | PDF 311.7 KB |
| Antenna information SLK-YLD-3028A-L-3201-B | Test Report | 2024-11-14 | PDF 2.2 MB |
| Antenna information SLK-YLD-3028A-L-400I-B | Test Report | 2024-11-14 | PDF 980.1 KB |
| Antenna information SLK-YLD-3028A1-L-2201-B | Test Report | 2024-11-14 | PDF 2.3 MB |
| Antenna information SLK-YLD-3028B-R-350I-B | Test Report | 2024-11-14 | PDF 3.1 MB |
| Test Report 5GWLAN | Test Report | 2024-11-14 | PDF 1.3 MB |
| Test Report 6GWLAN | Test Report | 2024-11-14 | PDF 1.3 MB |
| Test Report BT | Test Report | 2024-11-14 | PDF 1.1 MB |
| Test Report BT LE + 2G4WLAN | Test Report | 2024-11-14 | PDF 1.3 MB |
| Agent attestation letter | Attestation Statements | 2024-11-14 | PDF 512 KB |
| Covered equipment letter | Attestation Statements | 2024-11-14 | PDF 187.1 KB |
| Agent attestation letter | Attestation Statements | 2024-10-30 | PDF 511.9 KB |
| Covered equipment letter | Attestation Statements | 2024-10-30 | PDF 187.1 KB |
| Class II permissive change letter | Cover Letter(s) | 2024-11-14 | PDF 139.2 KB |
| Judgement letter | Cover Letter(s) | 2024-11-14 | PDF 171.3 KB |
| Authorization letter for FCC ID | Cover Letter(s) | 2024-10-30 | PDF 139.7 KB |
| Letter of change FCC ID | Cover Letter(s) | 2024-10-30 | PDF 309.1 KB |
| Product equality declaration letter | Cover Letter(s) | 2024-10-30 | PDF 131 KB |
| RF exposure evaluation | RF Exposure Info | 2024-11-14 | PDF 1.8 MB |
Application Information
| Application ID | ifMefhAvYRI7RvqfnZ7Z2w== |
|---|---|
| Final Action Date | 2024-11-14 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0023141955 |
| Model | AP6611S |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Wi-Fi/Bluetooth Module |
| Responsible Party | Lianqi Wang, wanglq@elclcd.com , 0755-29161269 |
| Test Firm | Sally Zhang, Shenzhen EU Testing Laboratory Limited, sally.zhang@eu-test.com  , (86)-18824580176 |
| TCB Email | o.kneip@kl-certification.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC as add new addtional antenna (Antenna 1: SLK-YLD-3028A1-L-2201-B, Antenna 2: SLK-YLD-3028A-L-3201-B, Antenna 3: SLK-YLD-3028A-L-400I-B, Antenna 4: SLK-YLD-3028B-R-3501-B). Power listed is maximum peak conducted output power. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This device supports 20MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ifMefhAvYRI7RvqfnZ7Z2w== | 2024-11-14 | Class II permissive change or modification of presently authorized equipment |
| Uy0bxdusFgnXDagBq18K9A== | 2024-11-14 | Class II permissive change or modification of presently authorized equipment |
| ReWV3B63VjOlcFMSpucN2w== | 2024-11-14 | Class II permissive change or modification of presently authorized equipment |
| ErKpAmyD+JUkCG1ncn0l8w== | 2024-11-14 | Class II permissive change or modification of presently authorized equipment |
| sHeulU4hQMk7RigXOvhm/w== | 2024-10-30 | Change in identification of presently authorized equipment. Original FCC ID: ZQ6-AP6611S Grant Date: 05/22/2024 |
| n50ETrKn9PTACn38mNLx8Q== | 2024-10-30 | Change in identification of presently authorized equipment. Original FCC ID: ZQ6-AP6611S Grant Date: 05/22/2024 |
| LxZXjfpOD/95TLJaqW8Cqg== | 2024-10-30 | Change in identification of presently authorized equipment. Original FCC ID: ZQ6-AP6611S Grant Date: 05/22/2024 |
| I3P/2K2cwG89hvyx8HJV3g== | 2024-10-30 | Change in identification of presently authorized equipment. Original FCC ID: ZQ6-AP6611S Grant Date: 05/22/2024 |
Equipment Authorization
Grants
TCB Grant - Application Uy0bxdusFgnXDagBq18K9A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 11/14/2024 Application Dated: 11/14/2024 |
| SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Bld.2,Yingfeng Industrial Zone,Tantou Community, |
| Songgang Street,Baoan |
| Shenzhen, China |
| Attention: Lianqi Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABC5-AP6611S |
| Name of Grantee: | SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi/Bluetooth Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.191 |
| C2PC as add new addtional antenna (Antenna 1: SLK-YLD-3028A1-L-2201-B, Antenna 2: SLK-YLD-3028A-L-3201-B, Antenna 3: SLK-YLD-3028A-L-400I-B, Antenna 4: SLK-YLD-3028B-R-3501-B). Power listed is maximum peak conducted output power. Modular Approval. This device supports 20 MHz bandwidth modes as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Device is a client device only configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Uy0bxdusFgnXDagBq18K9A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Bld.2,Yingfeng Industrial Zone,Tantou Community, Songgang Street,Baoan Shenzhen, China |
Date of Grant: 11/14/2024 Application Dated: 11/14/2024 |
| Attention: Lianqi Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABC5-AP6611S |
| Name of Grantee: | SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi/Bluetooth Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.191 |
| C2PC as add new addtional antenna (Antenna 1: SLK-YLD-3028A1-L-2201-B, Antenna 2: SLK-YLD-3028A-L-3201-B, Antenna 3: SLK-YLD-3028A-L-400I-B, Antenna 4: SLK-YLD-3028B-R-3501-B). Power listed is maximum peak conducted output power. Modular Approval. This device supports 20 MHz bandwidth modes as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Device is a client device only configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 10/30/2024 Application Dated: 10/30/2024 |
| SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Bld.2,Yingfeng Industrial Zone,Tantou Community, |
| Songgang Street,Baoan |
| Shenzhen, China |
| Attention: Lianqi Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABC5-AP6611S |
| Name of Grantee: | SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi/Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Power listed is maximum peak conducted output power. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This device supports 20MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application sHeulU4hQMk7RigXOvhm/w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Bld.2,Yingfeng Industrial Zone,Tantou Community, Songgang Street,Baoan Shenzhen, China |
Date of Grant: 10/30/2024 Application Dated: 10/30/2024 |
| Attention: Lianqi Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABC5-AP6611S |
| Name of Grantee: | SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi/Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| Power listed is maximum peak conducted output power. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This device supports 20MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 11/14/2024 Application Dated: 11/14/2024 |
| SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Bld.2,Yingfeng Industrial Zone,Tantou Community, |
| Songgang Street,Baoan |
| Shenzhen, China |
| Attention: Lianqi Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABC5-AP6611S |
| Name of Grantee: | SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | Wi-Fi/Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP | 15E | 5955.0 - 7115.0 | 0.074 |
| C2PC as add new addtional antenna (Antenna 1: SLK-YLD-3028A1-L-2201-B, Antenna 2: SLK-YLD-3028A-L-3201-B, Antenna 3: SLK-YLD-3028A-L-400I-B, Antenna 4: SLK-YLD-3028B-R-3501-B). Output power listed is EIRP. Single Modular Approval. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Device 6 GHz operation is limited to indoor use. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
EAS Grant - Application ReWV3B63VjOlcFMSpucN2w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Bld.2,Yingfeng Industrial Zone,Tantou Community, Songgang Street,Baoan Shenzhen, China |
Date of Grant: 11/14/2024 Application Dated: 11/14/2024 |
| Attention: Lianqi Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABC5-AP6611S |
| Name of Grantee: | SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | Wi-Fi/Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP | 15E | 5955.0 - 7115.0 | 0.074 |
| C2PC as add new addtional antenna (Antenna 1: SLK-YLD-3028A1-L-2201-B, Antenna 2: SLK-YLD-3028A-L-3201-B, Antenna 3: SLK-YLD-3028A-L-400I-B, Antenna 4: SLK-YLD-3028B-R-3501-B). Output power listed is EIRP. Single Modular Approval. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Device 6 GHz operation is limited to indoor use. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 10/30/2024 Application Dated: 10/30/2024 |
| SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Bld.2,Yingfeng Industrial Zone,Tantou Community, |
| Songgang Street,Baoan |
| Shenzhen, China |
| Attention: Lianqi Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABC5-AP6611S |
| Name of Grantee: | SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | Wi-Fi/Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP | 15E | 5955.0 - 7115.0 | 0.074 |
| Output power listed is EIRP. Single Modular Approval. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Device 6 GHz operation is limited to indoor use. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
EAS Grant - Application n50ETrKn9PTACn38mNLx8Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Bld.2,Yingfeng Industrial Zone,Tantou Community, Songgang Street,Baoan Shenzhen, China |
Date of Grant: 10/30/2024 Application Dated: 10/30/2024 |
| Attention: Lianqi Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABC5-AP6611S |
| Name of Grantee: | SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | Wi-Fi/Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP | 15E | 5955.0 - 7115.0 | 0.074 |
| Output power listed is EIRP. Single Modular Approval. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Device 6 GHz operation is limited to indoor use. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 10/30/2024 Application Dated: 10/30/2024 |
| SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Bld.2,Yingfeng Industrial Zone,Tantou Community, |
| Songgang Street,Baoan |
| Shenzhen, China |
| Attention: Lianqi Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABC5-AP6611S |
| Name of Grantee: | SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi/Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.085 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.102 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.069 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.066 |
| Power listed is maximum average conducted output power. Single Modular Approval. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Device is a client device only configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application LxZXjfpOD/95TLJaqW8Cqg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Bld.2,Yingfeng Industrial Zone,Tantou Community, Songgang Street,Baoan Shenzhen, China |
Date of Grant: 10/30/2024 Application Dated: 10/30/2024 |
| Attention: Lianqi Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABC5-AP6611S |
| Name of Grantee: | SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi/Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.085 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.102 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.069 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.066 |
| Power listed is maximum average conducted output power. Single Modular Approval. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Device is a client device only configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 11/14/2024 Application Dated: 11/14/2024 |
| SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Bld.2,Yingfeng Industrial Zone,Tantou Community, |
| Songgang Street,Baoan |
| Shenzhen, China |
| Attention: Lianqi Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABC5-AP6611S |
| Name of Grantee: | SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi/Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| C2PC as add new addtional antenna (Antenna 1: SLK-YLD-3028A1-L-2201-B, Antenna 2: SLK-YLD-3028A-L-3201-B, Antenna 3: SLK-YLD-3028A-L-400I-B, Antenna 4: SLK-YLD-3028B-R-3501-B). Power listed is maximum peak conducted output power. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This device supports 20MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ifMefhAvYRI7RvqfnZ7Z2w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Bld.2,Yingfeng Industrial Zone,Tantou Community, Songgang Street,Baoan Shenzhen, China |
Date of Grant: 11/14/2024 Application Dated: 11/14/2024 |
| Attention: Lianqi Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABC5-AP6611S |
| Name of Grantee: | SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi/Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.009 |
| C2PC as add new addtional antenna (Antenna 1: SLK-YLD-3028A1-L-2201-B, Antenna 2: SLK-YLD-3028A-L-3201-B, Antenna 3: SLK-YLD-3028A-L-400I-B, Antenna 4: SLK-YLD-3028B-R-3501-B). Power listed is maximum peak conducted output power. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This device supports 20MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 10/30/2024 Application Dated: 10/30/2024 |
| SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Bld.2,Yingfeng Industrial Zone,Tantou Community, |
| Songgang Street,Baoan |
| Shenzhen, China |
| Attention: Lianqi Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABC5-AP6611S |
| Name of Grantee: | SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi/Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.191 |
| Power listed is maximum peak conducted output power. Modular Approval. This device supports 20 MHz bandwidth modes as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Device is a client device only configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application I3P/2K2cwG89hvyx8HJV3g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Bld.2,Yingfeng Industrial Zone,Tantou Community, Songgang Street,Baoan Shenzhen, China |
Date of Grant: 10/30/2024 Application Dated: 10/30/2024 |
| Attention: Lianqi Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABC5-AP6611S |
| Name of Grantee: | SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi/Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.191 |
| Power listed is maximum peak conducted output power. Modular Approval. This device supports 20 MHz bandwidth modes as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. Device is a client device only configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 11/14/2024 Application Dated: 11/14/2024 |
| SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Bld.2,Yingfeng Industrial Zone,Tantou Community, |
| Songgang Street,Baoan |
| Shenzhen, China |
| Attention: Lianqi Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABC5-AP6611S |
| Name of Grantee: | SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi/Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.085 | ||
| CC ND | 15E | 5160.0 - 5320.0 | 0.102 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.069 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.066 |
| C2PC as add new addtional antenna (Antenna 1: SLK-YLD-3028A1-L-2201-B, Antenna 2: SLK-YLD-3028A-L-3201-B, Antenna 3: SLK-YLD-3028A-L-400I-B, Antenna 4: SLK-YLD-3028B-R-3501-B). Power listed is maximum average conducted output power. Single Modular Approval. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Device is a client device only configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application ErKpAmyD+JUkCG1ncn0l8w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. Bld.2,Yingfeng Industrial Zone,Tantou Community, Songgang Street,Baoan Shenzhen, China |
Date of Grant: 11/14/2024 Application Dated: 11/14/2024 |
| Attention: Lianqi Wang |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABC5-AP6611S |
| Name of Grantee: | SHENZHEN ELECTRON TECHNOLOGY CO.,LTD. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi/Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.085 | ||
| CC ND | 15E | 5160.0 - 5320.0 | 0.102 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.069 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.066 |
| C2PC as add new addtional antenna (Antenna 1: SLK-YLD-3028A1-L-2201-B, Antenna 2: SLK-YLD-3028A-L-3201-B, Antenna 3: SLK-YLD-3028A-L-400I-B, Antenna 4: SLK-YLD-3028B-R-3501-B). Power listed is maximum average conducted output power. Single Modular Approval. This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes as described in this filing. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. Device is a client device only configuration as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |