FCC ID 2ABC5-E0023

Android Tablet

by SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.

Grantee Code: 2ABC5   Product Code: E0023
Latest application date: 2022-08-29

FCC ID Device Details

FCC ID2ABC5-E0023
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ABC5
Product CodeE0023
Applicant BusinessSHENZHEN ELECTRON TECHNOLOGY CO.,LTD. 🇨🇳
Related Domains elclcd.com
Equipment ClassAndroid Tablet
Test FirmShenzhen Anbotek Compliance Laboratory Limited

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2022-08-29
5180-5240 MHzOriginal Equipment2022-08-29

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2022-08-29PDF 2.7 MB
Internal PhotosInternal Photos2022-08-29PDF 5.1 MB
External PhotosExternal Photos2022-08-29PDF 5.8 MB
LabelID Label/Location Info2022-08-29PDF 481.4 KB
Test Setup PhotosTest Setup Photos2022-08-29PDF 4.7 MB
Test ReportTest Report2022-08-29PDF 4.6 MB
Test ReportTest Report2022-08-29PDF 3.9 MB
Declaration Letter of Model DifferenceCover Letter(s)2022-08-29PDF 83.3 KB
FCC Short_Long Term Confidentiality Request Rev4.1Cover Letter(s)2022-08-29PDF 60.2 KB
FCCSoftwareConfigurationControlDeclarationRev1.1Cover Letter(s)2022-08-29PDF 91 KB
Letter of Authorization Rev 1.0Cover Letter(s)2022-08-29PDF 61.5 KB
LetterofAuthorizationRev1.0Cover Letter(s)2022-08-29PDF 61.5 KB
LongCover Letter(s)2022-08-29PDF 60.2 KB
MPERF Exposure Info2022-08-29PDF 145.6 KB
Block Metadata onlyBlock DiagramPDF 459.1 KB
BlockDiagram Metadata onlyBlock DiagramPDF 459.1 KB
SCH Metadata onlySchematicsPDF 3.4 MB
OP Metadata onlyOperational DescriptionPDF 110.7 KB
FCCSWSECURITYDESCRIPTION Metadata onlySDR Software/Security InfPDF 139.9 KB

Application Information

Application IDpW+LqgMOaukTnR1OxoPjzg==
Final Action Date2022-08-29
Application PurposeOriginal Equipment
Applicant FRN0023141955
ModelE0023
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionAndroid Tablet
Responsible PartyYonghong Li, yhli@elclcd.com , 0755-29161269
Technical ContactSHENZHEN ELECTRON TECHNOLOGY CO.,LTD., yhli@elclcd.com
Test FirmJeff Zhu, Shenzhen Anbotek Compliance Laboratory Limited, jeff.zhu@anbotek.com , 86-755-26064492
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
pW+LqgMOaukTnR1OxoPjzg==2022-08-29Original Equipment
JI8jJa0UervEYvuE31O1FA==2022-08-29Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.008415CCC
2412-2462 MHz0.065215CCC, MO
5180-5240 MHz0.158615ECC, MO
5745-5825 MHz0.125615ECC, MO

Grants

TCB Grant - Application pW+LqgMOaukTnR1OxoPjzg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 08/29/2022

Application Dated: 08/29/2022
SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.
Bld.2,Yingfeng Industrial Zone,Tantou Community,
Songgang Street,Baoan
Shenzhen,
China
 
Attention: Yonghong Li

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABC5-E0023
Name of Grantee:  SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.
Equipment Class: Digital Transmission System
Notes: Android Tablet
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0084  
CC MO 15C 2412.0  -  2462.0 0.0652  

Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application pW+LqgMOaukTnR1OxoPjzg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.
Bld.2,Yingfeng Industrial Zone,Tantou Community, Songgang Street,Baoan
Shenzhen,
China
  Date of Grant: 08/29/2022

Application Dated: 08/29/2022
 
Attention: Yonghong Li

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABC5-E0023
Name of Grantee:  SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.
Equipment Class: Digital Transmission System
Notes: Android Tablet
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0084  
CC MO 15C 2412.0  -  2462.0 0.0652  

Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application JI8jJa0UervEYvuE31O1FA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 08/29/2022

Application Dated: 08/29/2022
SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.
Bld.2,Yingfeng Industrial Zone,Tantou Community,
Songgang Street,Baoan
Shenzhen,
China
 
Attention: Yonghong Li

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABC5-E0023
Name of Grantee:  SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Android Tablet
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.1586  
CC MO 15E 5745.0  -  5825.0 0.1256  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application JI8jJa0UervEYvuE31O1FA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.
Bld.2,Yingfeng Industrial Zone,Tantou Community, Songgang Street,Baoan
Shenzhen,
China
  Date of Grant: 08/29/2022

Application Dated: 08/29/2022
 
Attention: Yonghong Li

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABC5-E0023
Name of Grantee:  SHENZHEN ELECTRON TECHNOLOGY CO.,LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Android Tablet
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.1586  
CC MO 15E 5745.0  -  5825.0 0.1256  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: