FCC ID 2ABRU-2564C
BDE Bluetooth 5.1 Dual Mode Transceiver Module Based on CC2564C
by Guangzhou BDE Technology Inc.
Grantee Code: 2ABRU Product Code: 2564C
Latest application date: 2025-05-30
FCC ID Device Details
| FCC ID | 2ABRU-2564C |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ABRU |
| Product Code | 2564C |
| Applicant Business | Guangzhou BDE Technology Inc. 🇨🇳 |
| Related Domains |  bdecomm.com |
| Equipment Class | BDE Bluetooth 5.1 Dual Mode Transceiver Module Based on CC2564C |
| Test Firm | SGS-CSTC Standards Technical Services Co., Ltd. Sh |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-05-30 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-05-30 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-24 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-24 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-11-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-11-12 |
| 2402-2480 MHz | Original Equipment | 2022-08-30 |
| 2402-2480 MHz | Original Equipment | 2022-08-30 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| LABEL LOCATION | Users Manual | 2025-05-30 | PDF 464.4 KB |
| user manua | Users Manual | 2025-05-30 | PDF 688 KB |
| CS BDE-BD2564CA Datasheet | Users Manual | 2024-05-11 | PDF 899.2 KB |
| CS BDE-BD2564CN Datasheet | Users Manual | 2024-05-11 | PDF 921.3 KB |
| User manual | Users Manual | 2024-01-24 | PDF 1.1 MB |
| External Photos | Users Manual | 2023-11-12 | PDF 2 MB |
| User manual | Users Manual | 2022-08-30 | PDF 1 MB |
| user manual | Users Manual | 2022-08-30 | PDF 986.1 KB |
| Intermal photos | Internal Photos | 2025-05-30 | PDF 671.6 KB |
| Internal Photos | Internal Photos | 2024-01-24 | PDF 369.5 KB |
| Internal Photos | Internal Photos | 2023-11-12 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2022-08-30 | PDF 1.2 MB |
| Internal photos | Internal Photos | 2022-08-30 | PDF 1.2 MB |
| Extemal photos | External Photos | 2025-05-30 | PDF 736.6 KB |
| External Photos | External Photos | 2024-01-24 | PDF 281 KB |
| External Photos | External Photos | 2023-11-12 | PDF 2 MB |
| External Photos | External Photos | 2022-08-30 | PDF 2 MB |
| LABEL LOCATION | ID Label/Location Info | 2025-05-30 | PDF 464.4 KB |
| lable location | ID Label/Location Info | 2025-05-30 | PDF 419.6 KB |
| label and location | ID Label/Location Info | 2024-01-24 | PDF 182.3 KB |
| label location | ID Label/Location Info | 2023-11-12 | PDF 464.4 KB |
| label&label location | ID Label/Location Info | 2023-11-12 | PDF 464.4 KB |
| Label | ID Label/Location Info | 2022-08-30 | PDF 464.4 KB |
| label | ID Label/Location Info | 2022-08-30 | PDF 464.4 KB |
| Test Setup Photograph | Test Setup Photos | 2025-05-30 | PDF 629.8 KB |
| Test Setup Photos | Test Setup Photos | 2024-01-24 | PDF 157.5 KB |
| Test Setup Photos | Test Setup Photos | 2022-08-30 | PDF 1,007 KB |
| Antenna Specification | Test Report | 2025-05-30 | PDF 944.3 KB |
| Test Report BLE | Test Report | 2025-05-30 | PDF 1,004.3 KB |
| Test Report BT | Test Report | 2025-05-30 | PDF 1 MB |
| test Report | Test Report | 2024-01-24 | PDF 632.4 KB |
| test Report | Test Report | 2024-01-24 | PDF 1,020.4 KB |
| AntennaSpecifications AT3216-B2R7HAAT | Test Report | 2023-11-12 | PDF 203.6 KB |
| AntennaSpecifications BDE-ANT007 | Test Report | 2023-11-12 | PDF 826.1 KB |
| AntennaSpecifications Fusca2.4GA10192 | Test Report | 2023-11-12 | PDF 636.6 KB |
| Test Report | Test Report | 2022-08-30 | PDF 2.3 MB |
| antenna Specifications | Test Report | 2022-08-30 | PDF 826.1 KB |
| test report | Test Report | 2022-08-30 | PDF 5.5 MB |
| test report | Test Report | 2022-08-30 | PDF 5.6 MB |
| 2.911_(d)(5)(i)Certification Equipment Type v1.2 | Attestation Statements | 2025-05-30 | PDF 133.7 KB |
| 2.911_(d)(5)(ii) Certificiation Applicant v1.2 | Attestation Statements | 2025-05-30 | PDF 133.1 KB |
| Attestation_Statements_Kaspersky_Rev 1.0 | Attestation Statements | 2025-05-30 | PDF 168.1 KB |
| U.S. Agent Letter of Attestation _Rev1.0 | Attestation Statements | 2025-05-30 | PDF 487.7 KB |
| USA agent lette | Attestation Statements | 2024-01-24 | PDF 449.3 KB |
| 2.911 (d)(5)(i)CertificationEquipmentTypev1.2 | Attestation Statements | 2023-11-12 | PDF 412.6 KB |
| 2.911 (d)(5)(ii)CertificiationApplicantv1.2 | Attestation Statements | 2023-11-12 | PDF 411.9 KB |
| 2.911_(d)(7) US Agent for Service of Process v1.2 | Attestation Statements | 2023-11-12 | PDF 449.3 KB |
| FCC Class II PC request letter Rev1.0 | Cover Letter(s) | 2025-05-30 | PDF 25.8 KB |
| FCC-Confidentiality-Request_Rev1.1 | Cover Letter(s) | 2025-05-30 | PDF 104.4 KB |
| FCC-POA_Rev1.0 | Cover Letter(s) | 2025-05-30 | PDF 126.9 KB |
| ANT Report | Cover Letter(s) | 2024-01-24 | PDF 1.7 MB |
| Agent Authorization Letter Template | Cover Letter(s) | 2024-01-24 | PDF 88.6 KB |
| Antenna Report | Cover Letter(s) | 2024-01-24 | PDF 1.7 MB |
| Certification Equipment Type | Cover Letter(s) | 2024-01-24 | PDF 489 KB |
| Certificiation Applicant | Cover Letter(s) | 2024-01-24 | PDF 488.3 KB |
| FCC Class II PC request letter | Cover Letter(s) | 2024-01-24 | PDF 312.6 KB |
| FCC Short & Long Term Confidentiality Request | Cover Letter(s) | 2024-01-24 | PDF 194.7 KB |
| Model Difference Statement | Cover Letter(s) | 2024-01-24 | PDF 33.2 KB |
| BDE-BD2564CA Datasheet Metadata only | Cover Letter(s) | 2023-11-12 | PDF 899.2 KB |
| BDE-BD2564CN Datasheet Metadata only | Cover Letter(s) | 2023-11-12 | PDF 921.3 KB |
| Difference Description | Cover Letter(s) | 2023-11-12 | PDF 24.5 KB |
| FCC Modular Approval Justification | Cover Letter(s) | 2023-11-12 | PDF 33.2 KB |
| FCC Short_Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2023-11-12 | PDF 134.4 KB |
| FCCApplicantLetterforModification | Cover Letter(s) | 2023-11-12 | PDF 59 KB |
| Letter of Authorization Rev1.0 | Cover Letter(s) | 2023-11-12 | PDF 25.9 KB |
| difference declaration | Cover Letter(s) | 2023-11-12 | PDF 24.5 KB |
| Agent Authorization | Cover Letter(s) | 2022-08-30 | PDF 25.9 KB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2022-08-30 | PDF 25.9 KB |
| Difference Description | Cover Letter(s) | 2022-08-30 | PDF 24.5 KB |
| Differences Declaration Letter | Cover Letter(s) | 2022-08-30 | PDF 24.5 KB |
| FCC Modular Approval Justification | Cover Letter(s) | 2022-08-30 | PDF 33.2 KB |
| FCC Modular Approval Request Rev 3.0_rev.1 | Cover Letter(s) | 2022-08-30 | PDF 33.2 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2022-08-30 | PDF 190.4 KB |
| FCC_Long Term Only Confidentiality Request | Cover Letter(s) | 2022-08-30 | PDF 190.4 KB |
| MPE | RF Exposure Info | 2025-05-30 | PDF 463.3 KB |
| RF Exposure Info | RF Exposure Info | 2024-01-24 | PDF 1.4 MB |
| RF exposure report | RF Exposure Info | 2024-01-24 | PDF 1.5 MB |
| RF Exposure | RF Exposure Info | 2023-11-12 | PDF 1.4 MB |
| RF Exposure | RF Exposure Info | 2022-08-30 | PDF 645.6 KB |
| BLOK Metadata only | Block Diagram | PDF 393.8 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 342 KB | |
| Block_Diagram Metadata only | Block Diagram | PDF 343.6 KB | |
| SCH Metadata only | Schematics | PDF 137.7 KB | |
| SCH Metadata only | Schematics | PDF 342.1 KB | |
| Schematic Metadata only | Schematics | PDF 134.4 KB | |
| OP Metadata only | Operational Description | PDF 295.2 KB | |
| OPS Metadata only | Operational Description | PDF 156 KB | |
| Operation Description Metadata only | Operational Description | PDF 303.4 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 104 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 59.4 KB |
Application Information
| Application ID | mpe58xniCopM6WpHbZUPmQ== |
|---|---|
| Final Action Date | 2025-05-30 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0023079460 |
| Model | 2564C |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | BDE Bluetooth 5.1 Dual Mode Transceiver Module Based on CC2564C |
| Responsible Party | Jacky Tian, info@bdecomm.com , (+86)15011900258 |
| Technical Contact | Guangzhou BDE Technology Inc., info@bdecomm.com |
| Test Firm | Keny Xu, SGS-CSTC Standards Technical Services Co., Ltd. Sh, Keny.Xu@sgs.com  , 86-(0)755-2532-8629 |
| TCB Email | joe_chew@derycom-us.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| mpe58xniCopM6WpHbZUPmQ== | 2025-05-30 | Class II permissive change or modification of presently authorized equipment |
| KAmG9On1V20Z3vakee9nng== | 2025-05-30 | Class II permissive change or modification of presently authorized equipment |
| maNPJs1ibfl9lk27gpQ6Hg== | 2024-01-24 | Class II permissive change or modification of presently authorized equipment |
| Y1mFelC8ZMt2SgaSLlQq/w== | 2024-01-24 | Class II permissive change or modification of presently authorized equipment |
| yRFl6zepSkkcl6nYIKfq8Q== | 2023-11-12 | Class II permissive change or modification of presently authorized equipment |
| cDBAP/zJ1YSQITXNsNZE7Q== | 2023-11-12 | Class II permissive change or modification of presently authorized equipment |
| tfgDynvv23wwC9JJBqTH0Q== | 2022-08-30 | Original Equipment |
| QM8rzVgH9J8eIGq6Y9OLqA== | 2022-08-30 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application yRFl6zepSkkcl6nYIKfq8Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 11/12/2023 Application Dated: 11/12/2023 |
| Guangzhou BDE Technology Inc. |
| B2-403, Chuangyi Building |
| 162 Science Avenue, Huangpu District |
| Guangzhou, 510663 China |
| Attention: Jacky Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-2564C |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BDE Bluetooth 5.1 Dual Mode Transceiver Module Based on CC2564C |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0073 |
| Single Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 15 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application yRFl6zepSkkcl6nYIKfq8Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou BDE Technology Inc. B2-403, Chuangyi Building 162 Science Avenue, Huangpu District Guangzhou, 510663 China |
Date of Grant: 11/12/2023 Application Dated: 11/12/2023 |
| Attention: Jacky Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-2564C |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BDE Bluetooth 5.1 Dual Mode Transceiver Module Based on CC2564C |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0073 |
| Single Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 15 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
QAI LABORATORIES LTD 3980 North Fraser Way Burnaby, BC, V5J5K5 Canada |
Date of Grant: 01/24/2024 Application Dated: 01/22/2024 |
| Guangzhou BDE Technology Inc. |
| B2-403, Chuangyi Building |
| 162 Science Avenue, Huangpu District |
| Guangzhou, 510663 China |
| Attention: Jacky Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-2564C |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BDE Bluetooth 5.1 Dual Mode Transceiver Module Based on CC2564C |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0073 |
| C2PC.The change under this application is to add a new antenna to the model BDE-BD2564CN. Single Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 15 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Y1mFelC8ZMt2SgaSLlQq/w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou BDE Technology Inc. B2-403, Chuangyi Building 162 Science Avenue, Huangpu District Guangzhou, 510663 China |
Date of Grant: 01/24/2024 Application Dated: 01/22/2024 |
| Attention: Jacky Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-2564C |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BDE Bluetooth 5.1 Dual Mode Transceiver Module Based on CC2564C |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0073 |
| C2PC.The change under this application is to add a new antenna to the model BDE-BD2564CN. Single Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 15 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/30/2022 Application Dated: 08/30/2022 |
| Guangzhou BDE Technology Inc. |
| B2-403, Chuangyi Building |
| 162 Science Avenue, Huangpu District |
| Guangzhou, 510663 China |
| Attention: Jacky Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-2564C |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BDE Bluetooth 5.1 Dual Mode Transceiver Module Based on CC2564C |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0073 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application tfgDynvv23wwC9JJBqTH0Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou BDE Technology Inc. B2-403, Chuangyi Building 162 Science Avenue, Huangpu District Guangzhou, 510663 China |
Date of Grant: 08/30/2022 Application Dated: 08/30/2022 |
| Attention: Jacky Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-2564C |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BDE Bluetooth 5.1 Dual Mode Transceiver Module Based on CC2564C |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0073 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/30/2022 Application Dated: 08/30/2022 |
| Guangzhou BDE Technology Inc. |
| B2-403, Chuangyi Building |
| 162 Science Avenue, Huangpu District |
| Guangzhou, 510663 China |
| Attention: Jacky Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-2564C |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | BDE Bluetooth 5.1 Dual Mode Transceiver Module Based on CC2564C |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0061 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application QM8rzVgH9J8eIGq6Y9OLqA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou BDE Technology Inc. B2-403, Chuangyi Building 162 Science Avenue, Huangpu District Guangzhou, 510663 China |
Date of Grant: 08/30/2022 Application Dated: 08/30/2022 |
| Attention: Jacky Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-2564C |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | BDE Bluetooth 5.1 Dual Mode Transceiver Module Based on CC2564C |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0061 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
DERYCOM CERTIFICATION SERVICES, INC. 1100 Falcon Avenue Glencoe, MN 55336 |
Date of Grant: 05/30/2025 Application Dated: 05/30/2025 |
| Guangzhou BDE Technology Inc. |
| B2-403, Chuangyi Building |
| 162 Science Avenue, Huangpu District |
| Guangzhou, 510663 China |
| Attention: Jacky Tian , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-2564C |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | BDE Bluetooth 5.1 Dual Mode Transceiver Module Based on CC2564C |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0073 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application maNPJs1ibfl9lk27gpQ6Hg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
QAI LABORATORIES LTD 3980 North Fraser Way Burnaby, BC, V5J5K5 Canada |
Date of Grant: 01/24/2024 Application Dated: 01/22/2024 |
| Guangzhou BDE Technology Inc. |
| B2-403, Chuangyi Building |
| 162 Science Avenue, Huangpu District |
| Guangzhou, 510663 China |
| Attention: Jacky Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-2564C |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | BDE Bluetooth 5.1 Dual Mode Transceiver Module Based on CC2564C |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0061 |
| C2PC.The change under this application is to add a new antenna to the model BDE-BD2564CN. Single Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 15 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application maNPJs1ibfl9lk27gpQ6Hg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou BDE Technology Inc. B2-403, Chuangyi Building 162 Science Avenue, Huangpu District Guangzhou, 510663 China |
Date of Grant: 01/24/2024 Application Dated: 01/22/2024 |
| Attention: Jacky Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-2564C |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | BDE Bluetooth 5.1 Dual Mode Transceiver Module Based on CC2564C |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0061 |
| C2PC.The change under this application is to add a new antenna to the model BDE-BD2564CN. Single Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 15 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
DERYCOM CERTIFICATION SERVICES, INC. 1100 Falcon Avenue Glencoe, MN 55336 |
Date of Grant: 05/30/2025 Application Dated: 05/30/2025 |
| Guangzhou BDE Technology Inc. |
| B2-403, Chuangyi Building |
| 162 Science Avenue, Huangpu District |
| Guangzhou, 510663 China |
| Attention: Jacky Tian , |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-2564C |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | BDE Bluetooth 5.1 Dual Mode Transceiver Module Based on CC2564C |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0061 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application cDBAP/zJ1YSQITXNsNZE7Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 11/12/2023 Application Dated: 11/12/2023 |
| Guangzhou BDE Technology Inc. |
| B2-403, Chuangyi Building |
| 162 Science Avenue, Huangpu District |
| Guangzhou, 510663 China |
| Attention: Jacky Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-2564C |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | BDE Bluetooth 5.1 Dual Mode Transceiver Module Based on CC2564C |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0061 |
| Single Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 15 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application cDBAP/zJ1YSQITXNsNZE7Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou BDE Technology Inc. B2-403, Chuangyi Building 162 Science Avenue, Huangpu District Guangzhou, 510663 China |
Date of Grant: 11/12/2023 Application Dated: 11/12/2023 |
| Attention: Jacky Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-2564C |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | BDE Bluetooth 5.1 Dual Mode Transceiver Module Based on CC2564C |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0061 |
| Single Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 15 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |