FCC ID 2ABRU-BDM209A
Bluetooth 5.1 Dual Mode Module
by Guangzhou BDE Technology Inc.
Grantee Code: 2ABRU Product Code: BDM209A
Latest application date: 2021-08-15
FCC ID Device Details
| FCC ID | 2ABRU-BDM209A |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ABRU |
| Product Code | BDM209A |
| Applicant Business | Guangzhou BDE Technology Inc. 🇨🇳 |
| Related Domains |  bdecomm.com |
| Equipment Class | Bluetooth 5.1 Dual Mode Module |
| Test Firm | Attestation of Global Compliance (Shenzhen) Co., L |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2021-08-15 |
| 2402-2480 MHz | Original Equipment | 2021-08-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2021-08-15 | PDF 719.7 KB |
| Internal Photos | Internal Photos | 2021-08-15 | PDF 353.7 KB |
| Internal photo | Internal Photos | 2021-08-15 | PDF 353.7 KB |
| External Photos | External Photos | 2021-08-15 | PDF 570.5 KB |
| external photo | External Photos | 2021-08-15 | PDF 570.5 KB |
| Labe Location | ID Label/Location Info | 2021-08-15 | PDF 259.6 KB |
| Label | ID Label/Location Info | 2021-08-15 | PDF 259.6 KB |
| Test Setup Photos | Test Setup Photos | 2021-08-15 | PDF 526.3 KB |
| Test setup photo | Test Setup Photos | 2021-08-15 | PDF 526.3 KB |
| Test Report | Test Report | 2021-08-15 | PDF 4.9 MB |
| Test Report | Test Report | 2021-08-15 | PDF 4.2 MB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2021-08-15 | PDF 26.2 KB |
| FCC Short & Long Term Confidentiality Request Rev4 | Cover Letter(s) | 2021-08-15 | PDF 128.1 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2021-08-15 | PDF 128.1 KB |
| Modular Approval Justification | Cover Letter(s) | 2021-08-15 | PDF 33.1 KB |
| RFExposure | RF Exposure Info | 2021-08-15 | PDF 1.2 MB |
| Block Diagram Metadata only | Block Diagram | PDF 132 KB | |
| Block diagram Metadata only | Block Diagram | PDF 132 KB | |
| SCH Metadata only | Schematics | PDF 105.7 KB | |
| OP Metadata only | Operational Description | PDF 156.7 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 71.4 KB |
Application Information
| Application ID | nCuOcIEaMflT0elfDzU8yQ== |
|---|---|
| Final Action Date | 2021-08-15 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0023079460 |
| Model | BDM209A |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth 5.1 Dual Mode Module |
| Responsible Party | Jacky Tian, info@bdecomm.com , (+86)15011900258 |
| Technical Contact | Guangzhou BDE Technology Inc., info@bdecomm.com |
| Test Firm | Doris Li, Attestation of Global Compliance (Shenzhen) Co., L, dorisli@agc-cert.com  , +86-755-25234088 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| nCuOcIEaMflT0elfDzU8yQ== | 2021-08-15 | Original Equipment |
| W/6NPJ0QCxLEw8bwcc7piQ== | 2021-08-15 | Original Equipment |
Grants
TCB Grant - Application W/6NPJ0QCxLEw8bwcc7piQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/15/2021 Application Dated: 08/15/2021 |
| Guangzhou BDE Technology Inc. |
| B2-403, Chuangyi Building |
| 162 Science Avenue, Huangpu District |
| Guangzhou, 510663 China |
| Attention: Jacky Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-BDM209A |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth 5.1 Dual Mode Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0038 |
| Single Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application W/6NPJ0QCxLEw8bwcc7piQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou BDE Technology Inc. B2-403, Chuangyi Building 162 Science Avenue, Huangpu District Guangzhou, 510663 China |
Date of Grant: 08/15/2021 Application Dated: 08/15/2021 |
| Attention: Jacky Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-BDM209A |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth 5.1 Dual Mode Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0038 |
| Single Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 08/15/2021 Application Dated: 08/15/2021 |
| Guangzhou BDE Technology Inc. |
| B2-403, Chuangyi Building |
| 162 Science Avenue, Huangpu District |
| Guangzhou, 510663 China |
| Attention: Jacky Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-BDM209A |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth 5.1 Dual Mode Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0038 |
| Single Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application nCuOcIEaMflT0elfDzU8yQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Guangzhou BDE Technology Inc. B2-403, Chuangyi Building 162 Science Avenue, Huangpu District Guangzhou, 510663 China |
Date of Grant: 08/15/2021 Application Dated: 08/15/2021 |
| Attention: Jacky Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABRU-BDM209A |
| Name of Grantee: | Guangzhou BDE Technology Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth 5.1 Dual Mode Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0038 |
| Single Modular Approval. Output power listed is maximum conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |