FCC ID 2ABRU-WF3235

BDE Dual-Band WiFi MCU Module

by Guangzhou BDE Technology Inc.

Grantee Code: 2ABRU   Product Code: WF3235
Latest application date: 2022-09-22

FCC ID Device Details

FCC ID2ABRU-WF3235
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ABRU
Product CodeWF3235
Applicant BusinessGuangzhou BDE Technology Inc. 🇨🇳
Related Domains bdecomm.com
Equipment ClassBDE Dual-Band WiFi MCU Module
Test FirmAttestation of Global Compliance (Shenzhen) Co., L

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2022-09-22
2412-2462 MHzOriginal Equipment2022-09-22

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2022-09-22PDF 2.8 MB
User manualUsers Manual2022-09-22PDF 2.8 MB
Internal PhotographsInternal Photos2022-09-22PDF 2.5 MB
Internal photosInternal Photos2022-09-22PDF 2.5 MB
External PhotosExternal Photos2022-09-22PDF 1.7 MB
LabelID Label/Location Info2022-09-22PDF 1.1 MB
Test Setup PhotosTest Setup Photos2022-09-22PDF 1 MB
ANTENNA reportTest Report2022-09-22PDF 3.1 MB
Antenna ReportTest Report2022-09-22PDF 921.8 KB
Antenna SpecificationTest Report2022-09-22PDF 921.8 KB
Test ReportTest Report2022-09-22PDF 4.6 MB
Test ReportTest Report2022-09-22PDF 4.7 MB
antenna Report Metadata onlyTest Report2022-09-22PDF 728.3 KB
antenna SpecificationsTest Report2022-09-22PDF 3.1 MB
test report Metadata onlyTest Report2022-09-22PDF 5.6 MB
test reportTest Report2022-09-22PDF 5.5 MB
Agent AuthorizationCover Letter(s)2022-09-22PDF 26 KB
Agent Authorization Rev 1.0Cover Letter(s)2022-09-22PDF 26 KB
Declaration Letter of Model DifferenceCover Letter(s)2022-09-22PDF 25.1 KB
Difference DescriptionCover Letter(s)2022-09-22PDF 25.1 KB
FCC Long Term Only Confidentiality RequestCover Letter(s)2022-09-22PDF 196.3 KB
FCC Modular Approval JustificationCover Letter(s)2022-09-22PDF 33.3 KB
FCC Modular Approval Request Rev 3.0Cover Letter(s)2022-09-22PDF 33.3 KB
FCC Short & Long Term Confidentiality RequestCover Letter(s)2022-09-22PDF 196.3 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2022-09-22PDF 86.2 KB
RF ExposureRF Exposure Info2022-09-22PDF 647.6 KB
RF exposure reportRF Exposure Info2022-09-22PDF 647.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 122.4 KB
SCH Metadata onlySchematicsPDF 206.5 KB
Schematic Metadata onlySchematicsPDF 206.5 KB
OP Metadata onlyOperational DescriptionPDF 497.2 KB
Operation Description Metadata onlyOperational DescriptionPDF 497.2 KB
FCC Software Security Requirements for UNII devices Rev 2.1 Metadata onlySDR Software/Security InfPDF 228.2 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 124.5 KB

Application Information

Application IDmes7notvqzunHt4g+Hy6GA==
Final Action Date2022-09-22
Application PurposeOriginal Equipment
Applicant FRN0023079460
ModelWF3235
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionBDE Dual-Band WiFi MCU Module
Responsible PartyJacky Tian, info@bdecomm.com , (+86)15011900258
Technical ContactGuangzhou BDE Technology Inc., info@bdecomm.com
Test FirmDoris Li, Attestation of Global Compliance (Shenzhen) Co., L, dorisli@agc-cert.com , +86-755-25234088
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
mes7notvqzunHt4g+Hy6GA==2022-09-22Original Equipment
6ENaMqGzbHsZKcBMQHdOzw==2022-09-22Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.019100015CCC
5180-5240 MHz0.007915ECC
5260-5320 MHz0.004615ECC, ND
5500-5700 MHz0.00915ECC, ND
5745-5825 MHz0.003715ECC

Grants

TCB Grant - Application mes7notvqzunHt4g+Hy6GA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 09/22/2022

Application Dated: 09/22/2022
Guangzhou BDE Technology Inc.
B2-403, Chuangyi Building
162 Science Avenue, Huangpu District
Guangzhou, 510663
China
 
Attention: Jacky Tian

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABRU-WF3235
Name of Grantee:  Guangzhou BDE Technology Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: BDE Dual-Band WiFi MCU Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0079  
CC ND 15E 5260.0  -  5320.0 0.0046  
CC ND 15E 5500.0  -  5700.0 0.009  
CC 15E 5745.0  -  5825.0 0.0037  

Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application mes7notvqzunHt4g+Hy6GA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Guangzhou BDE Technology Inc.
B2-403, Chuangyi Building 162 Science Avenue, Huangpu District
Guangzhou, 510663
China
  Date of Grant: 09/22/2022

Application Dated: 09/22/2022
 
Attention: Jacky Tian

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABRU-WF3235
Name of Grantee:  Guangzhou BDE Technology Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: BDE Dual-Band WiFi MCU Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0079  
CC ND 15E 5260.0  -  5320.0 0.0046  
CC ND 15E 5500.0  -  5700.0 0.009  
CC 15E 5745.0  -  5825.0 0.0037  

Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 6ENaMqGzbHsZKcBMQHdOzw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 09/22/2022

Application Dated: 09/22/2022
Guangzhou BDE Technology Inc.
B2-403, Chuangyi Building
162 Science Avenue, Huangpu District
Guangzhou, 510663
China
 
Attention: Jacky Tian

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABRU-WF3235
Name of Grantee:  Guangzhou BDE Technology Inc.
Equipment Class: Digital Transmission System
Notes: BDE Dual-Band WiFi MCU Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0191  

Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 6ENaMqGzbHsZKcBMQHdOzw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Guangzhou BDE Technology Inc.
B2-403, Chuangyi Building 162 Science Avenue, Huangpu District
Guangzhou, 510663
China
  Date of Grant: 09/22/2022

Application Dated: 09/22/2022
 
Attention: Jacky Tian

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABRU-WF3235
Name of Grantee:  Guangzhou BDE Technology Inc.
Equipment Class: Digital Transmission System
Notes: BDE Dual-Band WiFi MCU Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.0191  

Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: