FCC ID 2ABTU-C6490

C6490

by RuggON Corporation

Grantee Code: 2ABTU   Product Code: C6490
Latest application date: 2025-09-18

FCC ID Device Details

FCC ID2ABTU-C6490
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ABTU
Product CodeC6490
Applicant BusinessRuggON Corporation 🇹🇼
Related Domains ruggon.com
Equipment ClassC6490
Test FirmDEKRA TESTING AND CERTIFICATION CO., LTD. LinKou

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5815-5885 MHzClass II permissive change or modification of presently authorized equipment2025-09-18
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2025-09-18
6875-7115 MHzClass II permissive change or modification of presently authorized equipment2025-09-18
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2025-09-18
5180-5250 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AOHHTURBOX-C6490 Grant Date: 07/05/20232025-06-19
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AOHHTURBOX-C6490 Grant Date: 07/05/20232025-06-19
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AOHHTURBOX-C6490 Grant Date: 07/05/20232025-06-19
6875-7115 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AOHHTURBOX-C6490 Grant Date: 07/05/20232025-06-19

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2025-09-18PDF 2.5 MB
Internal Photo Pt. 1Internal Photos2025-09-18PDF 2.3 MB
Internal Photos Pt. 1Internal Photos2025-09-18PDF 2.3 MB
Internal Photos Pt. 2Internal Photos2025-09-18PDF 3.6 MB
Internal Photos pt. 1Internal Photos2025-09-18PDF 2.3 MB
Internal Photos pt. 2Internal Photos2025-09-18PDF 3.6 MB
External PhotoExternal Photos2025-09-18PDF 1.6 MB
External PhotosExternal Photos2025-09-18PDF 1.6 MB
External PhotosExternal Photos2025-06-19PDF 115.7 KB
Label LocationID Label/Location Info2025-09-18PDF 149.4 KB
Label SampleID Label/Location Info2025-09-18PDF 507 KB
Label LocationID Label/Location Info2025-06-19PDF 104.6 KB
Label SampleID Label/Location Info2025-06-19PDF 73.9 KB
TsupTest Setup Photos2025-09-18PDF 857.7 KB
Tsup 2.4G BLETest Setup Photos2025-09-18PDF 717.9 KB
Tsup 5G WiFi (Unii)-4Test Setup Photos2025-09-18PDF 857.7 KB
Tsup BTTest Setup Photos2025-09-18PDF 464.6 KB
Tsup DFS(Slave)Test Setup Photos2025-09-18PDF 618.3 KB
Antenna Spec AUXTest Report2025-09-18PDF 2.1 MB
Antenna Spec MAINTest Report2025-09-18PDF 2.1 MB
Appendix All (UNII)-4Test Report2025-09-18PDF 2 MB
Appendix All 2.4GTest Report2025-09-18PDF 1.4 MB
Appendix All 5G Part 1Test Report2025-09-18PDF 4 MB
Appendix All 5G Part 2Test Report2025-09-18PDF 1.4 MB
Appendix All BLETest Report2025-09-18PDF 856.1 KB
Appendix All BTTest Report2025-09-18PDF 409.9 KB
Appendix All DFS(Slave)Test Report2025-09-18PDF 406.2 KB
Appendix All WiFi 6ETest Report2025-09-18PDF 4.5 MB
Test Report (UNII)-4Test Report2025-09-18PDF 1.7 MB
Test Report 2.4GTest Report2025-09-18PDF 1.1 MB
Test Report 5GTest Report2025-09-18PDF 1.6 MB
Test Report BLETest Report2025-09-18PDF 755.2 KB
Test Report BTTest Report2025-09-18PDF 776.3 KB
Test Report DFS(Slave)Test Report2025-09-18PDF 412.4 KB
Test Report MPERF Exposure Info2025-09-18PDF 195.7 KB
Test Report WiFi 6ETest Report2025-09-18PDF 1.1 MB
Attestation Statement 2.911(d)(5)(i)Attestation Statements2025-09-18PDF 143.3 KB
Attestation Statement 2.911(d)(5)(ii)Attestation Statements2025-09-18PDF 168.9 KB
Attestation Statement part 2.911(d)(7)Attestation Statements2025-09-18PDF 146 KB
Att Statements 2.911(d)(5)(7)Attestation Statements2025-06-19PDF 146 KB
Att Statements 2.911(d)(5)(i)Attestation Statements2025-06-19PDF 143.3 KB
Att Statements 2.911(d)(5)(ii)Attestation Statements2025-06-19PDF 168.9 KB
Authorization LetterCover Letter(s)2025-09-18PDF 151.6 KB
Confidentiality LetterCover Letter(s)2025-09-18PDF 208.9 KB
Declaration Letter Metadata onlyCover Letter(s)2025-09-18PDF 151.6 KB
Permissive ChangeCover Letter(s)2025-09-18PDF 166.5 KB
Permissive Change LetterCover Letter(s)2025-09-18PDF 166.5 KB
Change in ID - New ApplicantCover Letter(s)2025-06-19PDF 188.8 KB
Change in ID - Original ApplicantCover Letter(s)2025-06-19PDF 26.5 KB
RF Exposure MPERF Exposure Info2025-09-18PDF 195.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 376.4 KB
Schematics Metadata onlySchematicsPDF 776.2 KB
Operational Description Metadata onlyOperational DescriptionPDF 1.1 MB

Application Information

Application IDfN2pxh9USgXx2cpgDeOOcw==
Final Action Date2025-09-18
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0023347594
ModelC6490
Frequency Range5815-5885 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionC6490
Responsible PartyJay Wu, jay_wu@ruggon.com , +886-2-87516008
Test FirmMirenda Liao, DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou, mirenda.liao@dekra.com , +886-2-7753-7200
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
fN2pxh9USgXx2cpgDeOOcw==2025-09-18Class II permissive change or modification of presently authorized equipment
d+zplQRoDWAaphA7GXxdSA==2025-09-18Class II permissive change or modification of presently authorized equipment
cNZK8mHsHigpVB50m5qhEA==2025-09-18Class II permissive change or modification of presently authorized equipment
2cF5tOcLuRq9IOx5GXPKHg==2025-09-18Class II permissive change or modification of presently authorized equipment
hJaGrklosccLY2E+g551TQ==2025-06-19Change in identification of presently authorized equipment. Original FCC ID: 2AOHHTURBOX-C6490 Grant Date: 07/05/2023
NNxtlhDjHUYm9PMZ8PGqMA==2025-06-19Change in identification of presently authorized equipment. Original FCC ID: 2AOHHTURBOX-C6490 Grant Date: 07/05/2023
Hw0oOeYnoxp9LQ282+INlg==2025-06-19Change in identification of presently authorized equipment. Original FCC ID: 2AOHHTURBOX-C6490 Grant Date: 07/05/2023
CmiYO2AJ/+4hmOjM8p8Pfg==2025-06-19Change in identification of presently authorized equipment. Original FCC ID: 2AOHHTURBOX-C6490 Grant Date: 07/05/2023

Equipment Authorization

FrequencyOutputGrant Notes
2402-2480 MHz0.012CC
2402-2480 MHz0.0017000CC
2412-2462 MHz0.104CC, MO
5180-5250 MHz0.065CC, MO
5250-5320 MHz0.072CC, MO, ND
5500-5700 MHz0.065CC, MO, ND
5745-5825 MHz0.036CC, MO
5815-5885 MHz0.225CC, EP, MO
5955-6415 MHz0.043CC, EP, MO
6435-6515 MHz0.03CC, EP, MO
6535-6855 MHz0.032CC, EP, MO
6875-7115 MHz0.029CC, EP, MO

Grants

TCB Grant - Application NNxtlhDjHUYm9PMZ8PGqMA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 06/19/2025

Application Dated: 06/19/2025
RuggON Corporation
4F, No. 298, Yang Guang St.
Neihu Dist.,
Taipei City,
Taiwan
 
Attention: Jay Wu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABTU-C6490
Name of Grantee:  RuggON Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: C6490
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0017  

Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Hw0oOeYnoxp9LQ282+INlg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 06/19/2025

Application Dated: 06/19/2025
RuggON Corporation
4F, No. 298, Yang Guang St.
Neihu Dist.,
Taipei City,
Taiwan
 
Attention: Jay Wu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABTU-C6490
Name of Grantee:  RuggON Corporation
Equipment Class: Digital Transmission System
Notes: C6490
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.012  
CC MO 15C 2412.0  -  2462.0 0.104  

Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device supports 20 MHz and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application hJaGrklosccLY2E+g551TQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 06/19/2025

Application Dated: 06/19/2025
RuggON Corporation
4F, No. 298, Yang Guang St.
Neihu Dist.,
Taipei City,
Taiwan
 
Attention: Jay Wu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABTU-C6490
Name of Grantee:  RuggON Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: C6490
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5250.0 0.065  
CC MO ND 15E 5250.0  -  5320.0 0.072  
CC MO ND 15E 5500.0  -  5700.0 0.065  
CC MO 15E 5745.0  -  5825.0 0.036  
CC EP MO 15E 5815.0  -  5885.0 0.225  

Modular Approval. Output Power listed is the maximum combined conducted output power, except for U-NII 4 which is EIRP. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. The device supports 20/40/80/160 MHz bandwidth modes. Device operation is intended for indoor use only.

CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application fN2pxh9USgXx2cpgDeOOcw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 09/18/2025

Application Dated: 09/15/2025
RuggON Corporation
4F, No. 298, Yang Guang St.
Neihu Dist.,
Taipei City,
Taiwan
 
Attention: Jay Wu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABTU-C6490
Name of Grantee:  RuggON Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: C6490
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5250.0 0.065  
CC MO ND 15E 5250.0  -  5320.0 0.072  
CO MO ND 15E 5500.0  -  5700.0 0.065  
CC MO 15E 5745.0  -  5825.0 0.036  
CC EP MO 15E 5815.0  -  5885.0 0.225  

Modular Approval. Output Power listed is conducted except for NII for which is EIRP. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.

Class II change: New host: Model: MT7050. 2 new PIFA type antennas.


CC: This device is certified pursuant to two different Part 15 rules sections.
CO: Transmitter meets technical requirements only for use at coast stations.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application d+zplQRoDWAaphA7GXxdSA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 09/18/2025

Application Dated: 09/15/2025
RuggON Corporation
4F, No. 298, Yang Guang St.
Neihu Dist.,
Taipei City,
Taiwan
 
Attention: Jay Wu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABTU-C6490
Name of Grantee:  RuggON Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: C6490
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0017  

Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing.

Class II change: New host: Model: MT7050. 2 new PIFA type antennas.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application cNZK8mHsHigpVB50m5qhEA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 09/18/2025

Application Dated: 09/15/2025
RuggON Corporation
4F, No. 298, Yang Guang St.
Neihu Dist.,
Taipei City,
Taiwan
 
Attention: Jay Wu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABTU-C6490
Name of Grantee:  RuggON Corporation
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: C6490
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  6415.0 0.043  
CC EP MO 15E 6435.0  -  6515.0 0.03  
CC EP MO 15E 6535.0  -  6855.0 0.032  
CC EP MO 15E 6875.0  -  7115.0 0.029  

Modular Approval. Power output listed is EIRP. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. Device is restricted to indoor use only.

Class II change: New host: Model: MT7050. 2 new PIFA type antennas.


CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application CmiYO2AJ/+4hmOjM8p8Pfg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 06/19/2025

Application Dated: 06/19/2025
RuggON Corporation
4F, No. 298, Yang Guang St.
Neihu Dist.,
Taipei City,
Taiwan
 
Attention: Jay Wu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABTU-C6490
Name of Grantee:  RuggON Corporation
Equipment Class: 15E 6 GHz Low Power Indoor Client
Notes: C6490
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC EP MO 15E 5955.0  -  6415.0 0.043  
CC EP MO 15E 6435.0  -  6515.0 0.03  
CC EP MO 15E 6535.0  -  6855.0 0.032  
CC EP MO 15E 6875.0  -  7115.0 0.029  

Modular Approval. Power listed is EIRP. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. The device supports 20/40/80/160 MHz bandwidth modes. Operation of this device must be confined to indoor use only.

CC: This device is certified pursuant to two different Part 15 rules sections.
EP: Output power is Effective Isotropic Radiated Power (EIRP)
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2cF5tOcLuRq9IOx5GXPKHg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 09/18/2025

Application Dated: 09/15/2025
RuggON Corporation
4F, No. 298, Yang Guang St.
Neihu Dist.,
Taipei City,
Taiwan
 
Attention: Jay Wu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABTU-C6490
Name of Grantee:  RuggON Corporation
Equipment Class: Digital Transmission System
Notes: C6490
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.012  
CC MO 15C 2412.0  -  2462.0 0.104  

Modular Approval. Power output listed is conducted. This module is approved for use only in the mobile configurations associated with this filing. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users may not be provided with the module installation instructions. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee.

Class II change: New host: Model: MT7050. 2 new PIFA type antennas.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.