FCC ID 2ABTU-MS01
WiFi SOM Module
by RuggON Corporation
Grantee Code: 2ABTU Product Code: MS01
Latest application date: 2020-02-18
FCC ID Device Details
| FCC ID | 2ABTU-MS01 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ABTU |
| Product Code | MS01 |
| Applicant Business | RuggON Corporation 🇹🇼 |
| Related Domains |  ruggon.com |
| Equipment Class | WiFi SOM Module |
| Test Firm | DEKRA TESTING AND CERTIFICATION Lin Kou Lab. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-02-18 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-02-18 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2020-02-18 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: COF-MS01 Grant Date: 05/03/2019 | 2019-12-24 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: COF-MS01 Grant Date: 05/03/2019 | 2019-12-24 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: COF-MS01 Grant Date: 05/03/2019 | 2019-12-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| MS-01- UserMan_0215 | Users Manual | 2020-02-18 | PDF 368.1 KB |
| MS-01- Inpho | Internal Photos | 2020-02-18 | PDF 2.7 MB |
| MS-01- Expho | External Photos | 2020-02-18 | PDF 1.2 MB |
| MS-01- Expho | External Photos | 2019-12-24 | PDF 175.1 KB |
| MS-01- LabelLoc | ID Label/Location Info | 2019-12-24 | PDF 43.3 KB |
| MS-01- Labelsmpl | ID Label/Location Info | 2019-12-24 | PDF 37.3 KB |
| MS-01- Tsup_0215 | Test Setup Photos | 2020-02-18 | PDF 670.1 KB |
| MS-01- TestRpt_15.247_BLE_0217 | Test Report | 2020-02-18 | PDF 3.5 MB |
| MS-01- TestRpt_15.247_BT_0217 | Test Report | 2020-02-18 | PDF 3.6 MB |
| MS-01- TestRpt_15.247_WLAN part 1_0217 | Test Report | 2020-02-18 | PDF 3.8 MB |
| MS-01- TestRpt_15.247_WLAN part 2_0217 | Test Report | 2020-02-18 | PDF 5.2 MB |
| MS-01- TestRpt_15.407 part 1_0217 | Test Report | 2020-02-18 | PDF 4.5 MB |
| MS-01- TestRpt_15.407 part 2_0217 | Test Report | 2020-02-18 | PDF 4.1 MB |
| MS-01- TestRpt_15.407 part 3_0217 | Test Report | 2020-02-18 | PDF 3.5 MB |
| MS-01- ATTESTATION | Cover Letter(s) | 2020-02-18 | PDF 120.1 KB |
| MS-01- Class II Change_0215 | Cover Letter(s) | 2020-02-18 | PDF 34.1 KB |
| MS-01- Confidentiality Request | Cover Letter(s) | 2020-02-18 | PDF 157.4 KB |
| MS-01- Declaration of authorization_FCC | Cover Letter(s) | 2020-02-18 | PDF 117 KB |
| MS-01- UNII Declaration letter | Cover Letter(s) | 2020-02-18 | PDF 474.3 KB |
| MS-01- Declaration letter for electrically identical | Cover Letter(s) | 2019-12-24 | PDF 74.9 KB |
| MS-01- FCC Auth Ltr Change of ID | Cover Letter(s) | 2019-12-24 | PDF 1.1 MB |
| MS-01- TestRpt_MPE | RF Exposure Info | 2020-02-18 | PDF 237 KB |
| Confidential_MS-01- OPDes_15.407 Metadata only | Operational Description | PDF 503 KB |
Application Information
| Application ID | dvlxXTKevDRe/UMicjzSJQ== |
|---|---|
| Final Action Date | 2020-02-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0023347594 |
| Model | MS01 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | WiFi SOM Module |
| Responsible Party | Jay Wu, Manager, jay_wu@ruggon.com , +886-2-87516008 |
| Technical Contact | Annie Liu, DEKRA Testing and Certification Co., Ltd, annie-an.liu@dekra.com  , 886-2-8601-3788 |
| Test Firm | Vincent Lin, DEKRA TESTING AND CERTIFICATION Lin Kou Lab., vincent.lin@dekra.com , 886286013788 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: (1) Adding antenna as documented in this filing. (2) Decrease in the WLAN Output Power through firmware. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| dvlxXTKevDRe/UMicjzSJQ== | 2020-02-18 | Class II permissive change or modification of presently authorized equipment |
| JLJ2cmpXO1hLm8g7e8Nk3g== | 2020-02-18 | Class II permissive change or modification of presently authorized equipment |
| 90IKBH4ca7rdu3eTBTdkBA== | 2020-02-18 | Class II permissive change or modification of presently authorized equipment |
| zhmCboQwwjWNk5Lj5zZhNA== | 2019-12-24 | Change in identification of presently authorized equipment. Original FCC ID: COF-MS01 Grant Date: 05/03/2019 |
| jDC3UCa2bootbjxsBVrn5w== | 2019-12-24 | Change in identification of presently authorized equipment. Original FCC ID: COF-MS01 Grant Date: 05/03/2019 |
| E45IkSdXpZnMD8jx/FtiBQ== | 2019-12-24 | Change in identification of presently authorized equipment. Original FCC ID: COF-MS01 Grant Date: 05/03/2019 |
Equipment Authorization
Grants
TCB Grant - Application zhmCboQwwjWNk5Lj5zZhNA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/24/2019 Application Dated: 12/23/2019 |
| RuggON Corporation |
| 4F, No. 298, Yang Guang St. |
| Neihu Dist., |
| Taipei City, Taiwan |
| Attention: Jay Wu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABTU-MS01 |
| Name of Grantee: | RuggON Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi SOM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00186 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.13709 |
| Single Modular Approval. Power listed is maximum power conducted. This device is to be used only for mobile and fixed applications. Device operates with specific antennas in MIMO configurations as described in this filing. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.. This device has 20, and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application zhmCboQwwjWNk5Lj5zZhNA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
RuggON Corporation 4F, No. 298, Yang Guang St. Neihu Dist., Taipei City, Taiwan |
Date of Grant: 12/24/2019 Application Dated: 12/23/2019 |
| Attention: Jay Wu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABTU-MS01 |
| Name of Grantee: | RuggON Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi SOM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00186 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.13709 |
| Single Modular Approval. Power listed is maximum power conducted. This device is to be used only for mobile and fixed applications. Device operates with specific antennas in MIMO configurations as described in this filing. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.. This device has 20, and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/18/2020 Application Dated: 02/18/2020 |
| RuggON Corporation |
| 4F, No. 298, Yang Guang St. |
| Neihu Dist., |
| Taipei City, Taiwan |
| Attention: Jay Wu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABTU-MS01 |
| Name of Grantee: | RuggON Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi SOM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00186 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.13709 |
| Single Modular Approval. Power listed is maximum power conducted. This device is to be used only for mobile and fixed applications. Device operates with specific antennas in MIMO configurations as described in this filing. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. Class II Permissive Change: (1) Adding antenna as documented in this filing. (2) Decrease in the WLAN Output Power through firmware. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application JLJ2cmpXO1hLm8g7e8Nk3g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
RuggON Corporation 4F, No. 298, Yang Guang St. Neihu Dist., Taipei City, Taiwan |
Date of Grant: 02/18/2020 Application Dated: 02/18/2020 |
| Attention: Jay Wu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABTU-MS01 |
| Name of Grantee: | RuggON Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi SOM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00186 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.13709 |
| Single Modular Approval. Power listed is maximum power conducted. This device is to be used only for mobile and fixed applications. Device operates with specific antennas in MIMO configurations as described in this filing. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. Class II Permissive Change: (1) Adding antenna as documented in this filing. (2) Decrease in the WLAN Output Power through firmware. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/24/2019 Application Dated: 12/23/2019 |
| RuggON Corporation |
| 4F, No. 298, Yang Guang St. |
| Neihu Dist., |
| Taipei City, Taiwan |
| Attention: Jay Wu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABTU-MS01 |
| Name of Grantee: | RuggON Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi SOM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.14093 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.13677 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.14028 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.13868 |
| Single Modular Approval. Power listed is maximum power conducted. This device is to be used only for mobile and fixed applications. Device operates with specific antennas in MIMO configurations as described in this filing. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application jDC3UCa2bootbjxsBVrn5w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
RuggON Corporation 4F, No. 298, Yang Guang St. Neihu Dist., Taipei City, Taiwan |
Date of Grant: 12/24/2019 Application Dated: 12/23/2019 |
| Attention: Jay Wu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABTU-MS01 |
| Name of Grantee: | RuggON Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi SOM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.14093 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.13677 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.14028 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.13868 |
| Single Modular Approval. Power listed is maximum power conducted. This device is to be used only for mobile and fixed applications. Device operates with specific antennas in MIMO configurations as described in this filing. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/24/2019 Application Dated: 12/23/2019 |
| RuggON Corporation |
| 4F, No. 298, Yang Guang St. |
| Neihu Dist., |
| Taipei City, Taiwan |
| Attention: Jay Wu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABTU-MS01 |
| Name of Grantee: | RuggON Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi SOM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00713 |
| Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application E45IkSdXpZnMD8jx/FtiBQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
RuggON Corporation 4F, No. 298, Yang Guang St. Neihu Dist., Taipei City, Taiwan |
Date of Grant: 12/24/2019 Application Dated: 12/23/2019 |
| Attention: Jay Wu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABTU-MS01 |
| Name of Grantee: | RuggON Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi SOM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00713 |
| Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/18/2020 Application Dated: 02/18/2020 |
| RuggON Corporation |
| 4F, No. 298, Yang Guang St. |
| Neihu Dist., |
| Taipei City, Taiwan |
| Attention: Jay Wu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABTU-MS01 |
| Name of Grantee: | RuggON Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi SOM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00713 |
| Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: (1) Adding antenna as documented in this filing. (2) Decrease in the WLAN Output Power through firmware. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application dvlxXTKevDRe/UMicjzSJQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
RuggON Corporation 4F, No. 298, Yang Guang St. Neihu Dist., Taipei City, Taiwan |
Date of Grant: 02/18/2020 Application Dated: 02/18/2020 |
| Attention: Jay Wu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABTU-MS01 |
| Name of Grantee: | RuggON Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi SOM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.00713 |
| Single Modular Approval. Power listed is conducted. This device is to be used only for mobile and fixed applications. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: (1) Adding antenna as documented in this filing. (2) Decrease in the WLAN Output Power through firmware. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/18/2020 Application Dated: 02/18/2020 |
| RuggON Corporation |
| 4F, No. 298, Yang Guang St. |
| Neihu Dist., |
| Taipei City, Taiwan |
| Attention: Jay Wu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABTU-MS01 |
| Name of Grantee: | RuggON Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi SOM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.14093 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.13677 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.14028 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.13868 |
| Single Modular Approval. Power listed is maximum power conducted. This device is to be used only for mobile and fixed applications. Device operates with specific antennas in MIMO configurations as described in this filing. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. Class II Permissive Change: (1) Adding antenna as documented in this filing. (2) Decrease in the WLAN Output Power through firmware. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 90IKBH4ca7rdu3eTBTdkBA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
RuggON Corporation 4F, No. 298, Yang Guang St. Neihu Dist., Taipei City, Taiwan |
Date of Grant: 02/18/2020 Application Dated: 02/18/2020 |
| Attention: Jay Wu , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ABTU-MS01 |
| Name of Grantee: | RuggON Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi SOM Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.14093 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.13677 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.14028 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.13868 |
| Single Modular Approval. Power listed is maximum power conducted. This device is to be used only for mobile and fixed applications. Device operates with specific antennas in MIMO configurations as described in this filing. This module can only be used with the antenna design in strict compliance with the OEM instructions provided. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. Class II Permissive Change: (1) Adding antenna as documented in this filing. (2) Decrease in the WLAN Output Power through firmware. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |