FCC ID 2ABZM-IUAPACLR

802.11ac Dual-Band Long Range Access Point

by SHENZHEN IP-COM NETWORKS CO.,LTD.

Grantee Code: 2ABZM   Product Code: IUAPACLR
Latest application date: 2020-07-22

FCC ID Device Details

FCC ID2ABZM-IUAPACLR
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ABZM
Product CodeIUAPACLR
Applicant BusinessSHENZHEN IP-COM NETWORKS CO.,LTD. 🇨🇳
Related Domains tenda.cn
Equipment Class802.11ac Dual-Band Long Range Access Point
Test FirmBTL Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2020-07-22
5180-5240 MHzOriginal Equipment2020-07-22

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2020-07-22PDF 1,020.6 KB
Internal photosInternal Photos2020-07-22PDF 2.8 MB
External photosExternal Photos2020-07-22PDF 1.7 MB
Label and label locationID Label/Location Info2020-07-22PDF 246 KB
Test setup photosTest Setup Photos2020-07-22PDF 1.3 MB
Test Report 2G4WLAN part 1Test Report2020-07-22PDF 4.9 MB
Test Report 2G4WLAN part 2Test Report2020-07-22PDF 4.3 MB
Test Report 5GWLAN part 1Test Report2020-07-22PDF 4.9 MB
Test Report 5GWLAN part 2Test Report2020-07-22PDF 2 MB
Authorization letter of applicationCover Letter(s)2020-07-22PDF 59.2 KB
Confidentiality request letterCover Letter(s)2020-07-22PDF 88.3 KB
Letter of declaration disable channel 12 and 13 by softwareCover Letter(s)2020-07-22PDF 253 KB
RF exposure evaluationRF Exposure Info2020-07-22PDF 164.1 KB
Block diagram Metadata onlyBlock DiagramPDF 75 KB
Schematic Metadata onlySchematicsPDF 321.7 KB
Letter of declaration software security requirement Metadata onlyOperational DescriptionPDF 816.7 KB
Letter of declaration unii device Metadata onlyOperational DescriptionPDF 83.6 KB
Operation description Metadata onlyOperational DescriptionPDF 108.8 KB

Application Information

Application IDeVeB99IY4+RiYyt9+0go5A==
Final Action Date2020-07-22
Application PurposeOriginal Equipment
Applicant FRN0023428113
ModelIUAPACLR
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11ac Dual-Band Long Range Access Point
Responsible PartyShen Yue, Engineer, cert@tenda.cn , 86-755-2765 7098
Test FirmSophia Huang, BTL Inc., Sophia.huang@newbtl.com , +86-769-83183000
TCB Emailtcb-essen@cetecom.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is peak conducted. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. Device operates with specific antennas in 3x3 MIMO configurations as described in this filing. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
eVeB99IY4+RiYyt9+0go5A==2020-07-22Original Equipment
Hpd+U1VIRroqatxs5WcChQ==2020-07-22Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.984000015CCC, MO
5180-5240 MHz0.584815ECC, MO
5745-5825 MHz0.650115ECC, MO

Grants

TCB Grant - Application Hpd+U1VIRroqatxs5WcChQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 07/22/2020

Application Dated: 07/22/2020
SHENZHEN IP-COM NETWORKS CO.,LTD.
Unit A, First Floor, Tower E3, No. 1001,
Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABZM-IUAPACLR
Name of Grantee:  SHENZHEN IP-COM NETWORKS CO.,LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ac Dual-Band Long Range Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5745.0  -  5825.0 0.6501  
CC MO 15E 5180.0  -  5240.0 0.5848  

Output Power listed is average conducted.

This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode.

Device operates with specific antennas in 2x2 MIMO configurations as described in this filing.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Hpd+U1VIRroqatxs5WcChQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN IP-COM NETWORKS CO.,LTD.
Unit A, First Floor, Tower E3, No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
  Date of Grant: 07/22/2020

Application Dated: 07/22/2020
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABZM-IUAPACLR
Name of Grantee:  SHENZHEN IP-COM NETWORKS CO.,LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 802.11ac Dual-Band Long Range Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5745.0  -  5825.0 0.6501  
CC MO 15E 5180.0  -  5240.0 0.5848  

Output Power listed is average conducted.

This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode.

Device operates with specific antennas in 2x2 MIMO configurations as described in this filing.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application eVeB99IY4+RiYyt9+0go5A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 07/22/2020

Application Dated: 07/22/2020
SHENZHEN IP-COM NETWORKS CO.,LTD.
Unit A, First Floor, Tower E3, No. 1001,
Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABZM-IUAPACLR
Name of Grantee:  SHENZHEN IP-COM NETWORKS CO.,LTD.
Equipment Class: Digital Transmission System
Notes: 802.11ac Dual-Band Long Range Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.984  

Output Power listed is peak conducted.

This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode.

Device operates with specific antennas in 3x3 MIMO configurations as described in this filing.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application eVeB99IY4+RiYyt9+0go5A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN IP-COM NETWORKS CO.,LTD.
Unit A, First Floor, Tower E3, No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
  Date of Grant: 07/22/2020

Application Dated: 07/22/2020
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABZM-IUAPACLR
Name of Grantee:  SHENZHEN IP-COM NETWORKS CO.,LTD.
Equipment Class: Digital Transmission System
Notes: 802.11ac Dual-Band Long Range Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.984  

Output Power listed is peak conducted.

This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode.

Device operates with specific antennas in 3x3 MIMO configurations as described in this filing.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: