FCC ID 2ABZMW175AP

1350M 11AC High Power Ceiling Access Point

by SHENZHEN IP-COM NETWORKS CO.,LTD.

Grantee Code: 2ABZM   Product Code: W175AP
Latest application date: 2015-04-22

FCC ID Device Details

FCC ID2ABZMW175AP
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ABZM
Product CodeW175AP
Applicant BusinessSHENZHEN IP-COM NETWORKS CO.,LTD. 🇨🇳
Related Domains tenda.cn newbtl.com
Equipment Class1350M 11AC High Power Ceiling Access Point
Test FirmBTL Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2015-04-22
5180-5240 MHzOriginal Equipment2015-04-22

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2015-04-22PDF 4.3 MB
Internal PhotosInternal Photos2015-04-22PDF 1.2 MB
External PhotosExternal Photos2015-04-22PDF 462.1 KB
ID Label/Location InfoID Label/Location Info2015-04-22PDF 181.3 KB
Test Setup PhotosTest Setup Photos2015-04-22PDF 477 KB
Test ReportTest Report2015-04-22PDF 4.6 MB
Test Report-1Test Report2015-04-22PDF 4.7 MB
Test Report-2Test Report2015-04-22PDF 3.3 MB
ConfidentialityCover Letter(s)2015-04-22PDF 107.4 KB
Declaration of authorizationCover Letter(s)2015-04-22PDF 108.4 KB
FCC DOCCover Letter(s)2015-04-22PDF 555.7 KB
RF ExposureRF Exposure Info2015-04-22PDF 47.6 KB
RF Exposure InfoRF Exposure Info2015-04-22PDF 47.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 109.3 KB
Schematics Metadata onlySchematicsPDF 1.1 MB
Operation Description for User Interface Metadata onlyOperational DescriptionPDF 207.2 KB
Operational Description Metadata onlyOperational DescriptionPDF 79.3 KB
software security Metadata onlyOperational DescriptionPDF 1.4 MB

Application Information

Application IDNiyIFggOxN66MQY8B5GW2w==
Final Action Date2015-04-22
Application PurposeOriginal Equipment
Applicant FRN0023428113
ModelW175AP
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description1350M 11AC High Power Ceiling Access Point
Responsible PartyShen Yue, Engineer, cert@tenda.cn , 86-755-2765 7098
AgentCathy Cathy Cathy, BTL Inc., cathy@newbtl.com , 86-769-83183000
Technical ContactSteven Lu, BTL Inc., steven@newbtl.com , 86-769-83183000
Non-Technical ContactCathy Wang, BTL Inc., cathy@newbtl.com , 86-769-83183000
Test FirmDaisy Dai, BTL Inc., daisy.dai@newbtl.org.cn , 8676983183000
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.

Applications

Application IDDatePurpose
NiyIFggOxN66MQY8B5GW2w==2015-04-22Original Equipment
6+rd7mI0CJ7z3RNn0cwYpA==2015-04-22Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.240000015CCC, MO
5180-5240 MHz0.0215E38, CC, MO
5745-5825 MHz0.0415E38, CC, MO

Grants

TCB Grant - Application NiyIFggOxN66MQY8B5GW2w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/22/2015

Application Dated: 04/22/2015
SHENZHEN IP-COM NETWORKS CO.,LTD.
Unit A, First Floor, Tower E3, No. 1001,
Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABZMW175AP
Name of Grantee:  SHENZHEN IP-COM NETWORKS CO.,LTD.
Equipment Class: Digital Transmission System
Notes: 1350M 11AC High Power Ceiling Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.24  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application NiyIFggOxN66MQY8B5GW2w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN IP-COM NETWORKS CO.,LTD.
Unit A, First Floor, Tower E3, No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
  Date of Grant: 04/22/2015

Application Dated: 04/22/2015
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABZMW175AP
Name of Grantee:  SHENZHEN IP-COM NETWORKS CO.,LTD.
Equipment Class: Digital Transmission System
Notes: 1350M 11AC High Power Ceiling Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.24  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 6+rd7mI0CJ7z3RNn0cwYpA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/22/2015

Application Dated: 04/22/2015
SHENZHEN IP-COM NETWORKS CO.,LTD.
Unit A, First Floor, Tower E3, No. 1001,
Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABZMW175AP
Name of Grantee:  SHENZHEN IP-COM NETWORKS CO.,LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 1350M 11AC High Power Ceiling Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.02  
38 CC MO 15E 5745.0  -  5825.0 0.04  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40/80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 6+rd7mI0CJ7z3RNn0cwYpA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN IP-COM NETWORKS CO.,LTD.
Unit A, First Floor, Tower E3, No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
  Date of Grant: 04/22/2015

Application Dated: 04/22/2015
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABZMW175AP
Name of Grantee:  SHENZHEN IP-COM NETWORKS CO.,LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 1350M 11AC High Power Ceiling Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.02  
38 CC MO 15E 5745.0  -  5825.0 0.04  

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40/80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: