FCC ID 2ABZMW185AP

1750M 11AC High Power Ceiling Access Point

by SHENZHEN IP-COM NETWORKS CO.,LTD.

Grantee Code: 2ABZM   Product Code: W185AP
Latest application date: 2015-04-17

FCC ID Device Details

FCC ID2ABZMW185AP
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ABZM
Product CodeW185AP
Applicant BusinessSHENZHEN IP-COM NETWORKS CO.,LTD. 🇨🇳
Related Domains tenda.cn
Equipment Class1750M 11AC High Power Ceiling Access Point
Test FirmBTL Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2015-04-17
5180-5240 MHzOriginal Equipment2015-04-17

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2015-04-17PDF 4.4 MB
Internal PhotosInternal Photos2015-04-17PDF 2.2 MB
External PhotosExternal Photos2015-04-17PDF 1 MB
Label infoID Label/Location Info2015-04-17PDF 397.1 KB
Test PhotosTest Setup Photos2015-04-17PDF 862.5 KB
Test ReportTest Report2015-04-17PDF 4.5 MB
Test ReportTest Report2015-04-17PDF 5.6 MB
Test Report 2Test Report2015-04-17PDF 4.9 MB
Test Report 3Test Report2015-04-17PDF 3 MB
Ad-Hoc LetterCover Letter(s)2015-04-17PDF 102.1 KB
Confidentiality LetterCover Letter(s)2015-04-17PDF 109.5 KB
POACover Letter(s)2015-04-17PDF 108 KB
RF ExposureRF Exposure Info2015-04-17PDF 47.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 326.3 KB
Schematics Metadata onlySchematicsPDF 3.5 MB
Operational Description Metadata onlyOperational DescriptionPDF 81 KB
Operational Description 2 Metadata onlyOperational DescriptionPDF 1.4 MB
Operational Description 3 Metadata onlyOperational DescriptionPDF 211.1 KB

Application Information

Application IDuaffDD446rk710L+Ir2VzQ==
Final Action Date2015-04-17
Application PurposeOriginal Equipment
Applicant FRN0023428113
ModelW185AP
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description1750M 11AC High Power Ceiling Access Point
Responsible PartyShen Yue, Engineer, cert@tenda.cn , 86-755-2765 7098
Test FirmDaisy Dai, BTL Inc., daisy.dai@btl.org.cn , 008676983183000
TCB Emailbentje.holger@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is the maximum combined conducted peak output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 and 40 MHz BW modes.

Applications

Application IDDatePurpose
uaffDD446rk710L+Ir2VzQ==2015-04-17Original Equipment
QZawytjfU+/x5qwUNHJzvA==2015-04-17Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.991000015CCC, MO
5180-5240 MHz0.11915E38, CC, MO
5745-5825 MHz0.12415E38, CC, MO

Grants

TCB Grant - Application uaffDD446rk710L+Ir2VzQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 04/17/2015

Application Dated: 04/17/2015
SHENZHEN IP-COM NETWORKS CO.,LTD.
Unit A, First Floor, Tower E3, No. 1001,
Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABZMW185AP
Name of Grantee:  SHENZHEN IP-COM NETWORKS CO.,LTD.
Equipment Class: Digital Transmission System
Notes: 1750M 11AC High Power Ceiling Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.991  

Output Power listed is the maximum combined conducted peak output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 and 40 MHz BW modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application uaffDD446rk710L+Ir2VzQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN IP-COM NETWORKS CO.,LTD.
Unit A, First Floor, Tower E3, No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
  Date of Grant: 04/17/2015

Application Dated: 04/17/2015
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABZMW185AP
Name of Grantee:  SHENZHEN IP-COM NETWORKS CO.,LTD.
Equipment Class: Digital Transmission System
Notes: 1750M 11AC High Power Ceiling Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.991  

Output Power listed is the maximum combined conducted peak output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. This device has 20 and 40 MHz BW modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application QZawytjfU+/x5qwUNHJzvA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 04/17/2015

Application Dated: 04/17/2015
SHENZHEN IP-COM NETWORKS CO.,LTD.
Unit A, First Floor, Tower E3, No. 1001,
Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABZMW185AP
Name of Grantee:  SHENZHEN IP-COM NETWORKS CO.,LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 1750M 11AC High Power Ceiling Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.119  
38 CC MO 15E 5745.0  -  5825.0 0.124  

Output Power listed is the maximum combined conducted output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. Operation of this device is restricted to indoor use only. This device has 20,40 and 80 MHz BW modes. Operation of this device is restricted to indoor use only.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application QZawytjfU+/x5qwUNHJzvA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN IP-COM NETWORKS CO.,LTD.
Unit A, First Floor, Tower E3, No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
  Date of Grant: 04/17/2015

Application Dated: 04/17/2015
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABZMW185AP
Name of Grantee:  SHENZHEN IP-COM NETWORKS CO.,LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 1750M 11AC High Power Ceiling Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.119  
38 CC MO 15E 5745.0  -  5825.0 0.124  

Output Power listed is the maximum combined conducted output power as indicated in the filing. This device must be installed and operated to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 3T3R Spatial Multiplexing MIMO configuration as described in this filing. Operation of this device is restricted to indoor use only. This device has 20,40 and 80 MHz BW modes. Operation of this device is restricted to indoor use only.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: