FCC ID 2AC23-DCT2U

WIFI+BT Module

by Hui Zhou Gaoshengda Technology Co.,LTD

Grantee Code: 2AC23   Product Code: DCT2U
Latest application date: 2022-03-25

FCC ID Device Details

FCC ID2AC23-DCT2U
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AC23
Product CodeDCT2U
Applicant BusinessHui Zhou Gaoshengda Technology Co.,LTD 🇨🇳
Related Domains gaosd.cn
Equipment ClassWIFI+BT Module
Test FirmUL Verification Services (Guangzhou) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2022-03-25
2402-2480 MHzOriginal Equipment2022-03-25
2402-2480 MHzOriginal Equipment2022-03-25

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2022-03-25PDF 419.4 KB
User manualUsers Manual2022-03-25PDF 419.4 KB
user manualUsers Manual2022-03-25PDF 419.4 KB
Internal PhotosInternal Photos2022-03-25PDF 124.4 KB
Internal photosInternal Photos2022-03-25PDF 124.4 KB
External PhotosExternal Photos2022-03-25PDF 437.7 KB
External photosExternal Photos2022-03-25PDF 437.7 KB
LabelID Label/Location Info2022-03-25PDF 155 KB
Label and locationID Label/Location Info2022-03-25PDF 155 KB
Test Setup PhotosTest Setup Photos2022-03-25PDF 387.8 KB
Test ReportTest Report2022-03-25PDF 5.5 MB
Test ReportTest Report2022-03-25PDF 5.5 MB
Test ReportTest Report2022-03-25PDF 5.1 MB
Agent Authorization LetterCover Letter(s)2022-03-25PDF 265.3 KB
Agent Authorization Rev 1.0Cover Letter(s)2022-03-25PDF 265.3 KB
FCC Modular Approval Request Rev 3.0Cover Letter(s)2022-03-25PDF 286.2 KB
FCC Short & Long Term Confidentiality Request Rev4.1Cover Letter(s)2022-03-25PDF 69.4 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2022-03-25PDF 285.9 KB
RF ExposureRF Exposure Info2022-03-25PDF 171.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 24.3 KB
SCH Metadata onlySchematicsPDF 103.2 KB
Schematic Metadata onlySchematicsPDF 103.2 KB
OP Metadata onlyOperational DescriptionPDF 226.1 KB
Operation Description Metadata onlyOperational DescriptionPDF 226.1 KB
SOFTWARESECURITYREQUIREMENTSFORU-NIIDEVICES Metadata onlySDR Software/Security InfPDF 503.4 KB

Application Information

Application IDyH2M9Fq9F5/fgjBVkxFMKw==
Final Action Date2022-03-25
Application PurposeOriginal Equipment
Applicant FRN0023834823
ModelDCT2U
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWIFI+BT Module
Responsible PartyHui Guan, guanh@gaosd.cn , +86-0752-2096698
Technical ContactHui Zhou Gaoshengda Technology Co.,LTD, guanh@gaosd.cn
Test FirmStephen Guo, UL Verification Services (Guangzhou) Co., Ltd., Stephen.guo@ul.com , +86 0769 33817120
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

Applications

Application IDDatePurpose
yH2M9Fq9F5/fgjBVkxFMKw==2022-03-25Original Equipment
ppbLg3xoRqoUGmTinL83xQ==2022-03-25Original Equipment
abDnrrqKHOo8SrICDEP9ag==2022-03-25Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.006915CCC
2402-2480 MHz0.013840015CCC
2412-2462 MHz0.0933315CCC
5180-5240 MHz0.1267715E38, CC
5260-5320 MHz0.1111715E38, CC, ND
5500-5720 MHz0.0731115E38, CC, ND
5745-5825 MHz0.119415E38, CC

Grants

TCB Grant - Application yH2M9Fq9F5/fgjBVkxFMKw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 03/25/2022

Application Dated: 03/25/2022
Hui Zhou Gaoshengda Technology Co.,LTD
NO.75 Zhongkai Development Area
Huizhou, Guangdong,
China
 
Attention: Hui Guan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AC23-DCT2U
Name of Grantee:  Hui Zhou Gaoshengda Technology Co.,LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIFI+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.12677  
38 CC ND 15E 5260.0  -  5320.0 0.11117  
38 CC ND 15E 5500.0  -  5720.0 0.07311  
38 CC 15E 5745.0  -  5825.0 0.1194  

Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application yH2M9Fq9F5/fgjBVkxFMKw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hui Zhou Gaoshengda Technology Co.,LTD
NO.75 Zhongkai Development Area
Huizhou, Guangdong,
China
  Date of Grant: 03/25/2022

Application Dated: 03/25/2022
 
Attention: Hui Guan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AC23-DCT2U
Name of Grantee:  Hui Zhou Gaoshengda Technology Co.,LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIFI+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.12677  
38 CC ND 15E 5260.0  -  5320.0 0.11117  
38 CC ND 15E 5500.0  -  5720.0 0.07311  
38 CC 15E 5745.0  -  5825.0 0.1194  

Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application ppbLg3xoRqoUGmTinL83xQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 03/25/2022

Application Dated: 03/25/2022
Hui Zhou Gaoshengda Technology Co.,LTD
NO.75 Zhongkai Development Area
Huizhou, Guangdong,
China
 
Attention: Hui Guan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AC23-DCT2U
Name of Grantee:  Hui Zhou Gaoshengda Technology Co.,LTD
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WIFI+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01384  

Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ppbLg3xoRqoUGmTinL83xQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hui Zhou Gaoshengda Technology Co.,LTD
NO.75 Zhongkai Development Area
Huizhou, Guangdong,
China
  Date of Grant: 03/25/2022

Application Dated: 03/25/2022
 
Attention: Hui Guan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AC23-DCT2U
Name of Grantee:  Hui Zhou Gaoshengda Technology Co.,LTD
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WIFI+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01384  

Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application abDnrrqKHOo8SrICDEP9ag==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 03/25/2022

Application Dated: 03/25/2022
Hui Zhou Gaoshengda Technology Co.,LTD
NO.75 Zhongkai Development Area
Huizhou, Guangdong,
China
 
Attention: Hui Guan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AC23-DCT2U
Name of Grantee:  Hui Zhou Gaoshengda Technology Co.,LTD
Equipment Class: Digital Transmission System
Notes: WIFI+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0069  
CC 15C 2412.0  -  2462.0 0.09333  

Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application abDnrrqKHOo8SrICDEP9ag==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hui Zhou Gaoshengda Technology Co.,LTD
NO.75 Zhongkai Development Area
Huizhou, Guangdong,
China
  Date of Grant: 03/25/2022

Application Dated: 03/25/2022
 
Attention: Hui Guan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AC23-DCT2U
Name of Grantee:  Hui Zhou Gaoshengda Technology Co.,LTD
Equipment Class: Digital Transmission System
Notes: WIFI+BT Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0069  
CC 15C 2412.0  -  2462.0 0.09333  

Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: