FCC ID 2AC23-WCT3EM2611

WIFI Module

by Hui Zhou Gaoshengda Technology Co.,LTD

Grantee Code: 2AC23   Product Code: WCT3EM2611
Latest application date: 2016-11-28

Device Images

FCC ID Device Details

FCC ID2AC23-WCT3EM2611
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AC23
Product CodeWCT3EM2611
Applicant BusinessHui Zhou Gaoshengda Technology Co.,LTD 🇨🇳
Related Domains gaosd.cn
Equipment ClassWIFI Module
Test FirmShenzhen ATL Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2016-11-28
2402-2480 MHzOriginal Equipment2016-11-28
2402-2480 MHzOriginal Equipment2016-11-28

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2016-11-28PDF 223.8 KB
Internal PhotosInternal Photos2016-11-28PDF 174.2 KB
External PhotosExternal Photos2016-11-28PDF 208 KB
LabelID Label/Location Info2016-11-28PDF 478.7 KB
Label LocationID Label/Location Info2016-11-28PDF 127.6 KB
Test Setup PhotosTest Setup Photos2016-11-28PDF 168.5 KB
2.4G WiFi Test ReportTest Report2016-11-28PDF 2.1 MB
BLE Test ReportTest Report2016-11-28PDF 934.5 KB
Test ReportTest Report2016-11-28PDF 3.7 MB
Test ReportTest Report2016-11-28PDF 1.8 MB
Attestation LetterAttestation Statements2016-11-28PDF 50.2 KB
Modular Approval LetterAttestation Statements2016-11-28PDF 179.7 KB
Software Configuration Control DeclarationAttestation Statements2016-11-28PDF 15.6 KB
Authorization LetterCover Letter(s)2016-11-28PDF 16.8 KB
Confidentiality LetterCover Letter(s)2016-11-28PDF 41.1 KB
RF Exposure ReportRF Exposure Info2016-11-28PDF 109.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 80 KB
Schematics Metadata onlySchematicsPDF 171.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 40.2 KB
Software security operational description Metadata onlySDR Software/Security InfPDF 82.9 KB

Application Information

Application IDSBIg33wldusrtAtODpcATQ==
Final Action Date2016-11-28
Application PurposeOriginal Equipment
Applicant FRN0023889280
ModelWCT3EM2611
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWIFI Module
Responsible PartyHui Guan, guanh@gaosd.cn , +86-0752-2096698
Technical ContactMark Koop, Teleconformity, mark.koop@teleconformity.com , +31 84 8395867
Test FirmSteven W, Shenzhen ATL Testing Technology Co., Ltd., atlqa_2015@163.com , 086-0755-26909822
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is maximum combined conducted output power. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device? except in accordance with accepted multi-transmitter operating procedure. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. Device supports 20/40/80 MHz bandwidth modes.

Applications

Application IDDatePurpose
SBIg33wldusrtAtODpcATQ==2016-11-28Original Equipment
6teJ4def36FhSJWNjuIqOg==2016-11-28Original Equipment
+2WVcoVWnxZz9G8JUFVz5w==2016-11-28Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.001515C20, CC, MO
2402-2480 MHz0.001200015C20, CC
2412-2462 MHz0.110915C20, CC, MO
5180-5240 MHz0.03915E38, CC, MO
5745-5825 MHz0.034315E38, CC, MO

Grants

TCB Grant - Application SBIg33wldusrtAtODpcATQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 11/28/2016

Application Dated: 11/28/2016
Hui Zhou Gaoshengda Technology Co.,LTD
NO.75 Zhongkai Development Area
Huizhou, Guangdong,
China
 
Attention: Hui Guan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AC23-WCT3EM2611
Name of Grantee:  Hui Zhou Gaoshengda Technology Co.,LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.039  
38 CC MO 15E 5745.0  -  5825.0 0.0343  

Single Modular Approval. Output power listed is maximum combined conducted output power. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device? except in accordance with accepted multi-transmitter operating procedure. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. Device supports 20/40/80 MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application SBIg33wldusrtAtODpcATQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hui Zhou Gaoshengda Technology Co.,LTD
NO.75 Zhongkai Development Area
Huizhou, Guangdong,
China
  Date of Grant: 11/28/2016

Application Dated: 11/28/2016
 
Attention: Hui Guan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AC23-WCT3EM2611
Name of Grantee:  Hui Zhou Gaoshengda Technology Co.,LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.039  
38 CC MO 15E 5745.0  -  5825.0 0.0343  

Single Modular Approval. Output power listed is maximum combined conducted output power. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device? except in accordance with accepted multi-transmitter operating procedure. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. Device supports 20/40/80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 6teJ4def36FhSJWNjuIqOg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 11/28/2016

Application Dated: 11/28/2016
Hui Zhou Gaoshengda Technology Co.,LTD
NO.75 Zhongkai Development Area
Huizhou, Guangdong,
China
 
Attention: Hui Guan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AC23-WCT3EM2611
Name of Grantee:  Hui Zhou Gaoshengda Technology Co.,LTD
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CC 15C 2402.0  -  2480.0 0.0012  

Single Modular Approval. Output power listed is maximum conducted output power. The antennas used with this transmitter must be installed to provide a minimum separation distance of 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device? except in accordance with accepted multi-transmitter operating procedure. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 6teJ4def36FhSJWNjuIqOg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hui Zhou Gaoshengda Technology Co.,LTD
NO.75 Zhongkai Development Area
Huizhou, Guangdong,
China
  Date of Grant: 11/28/2016

Application Dated: 11/28/2016
 
Attention: Hui Guan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AC23-WCT3EM2611
Name of Grantee:  Hui Zhou Gaoshengda Technology Co.,LTD
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CC 15C 2402.0  -  2480.0 0.0012  

Single Modular Approval. Output power listed is maximum conducted output power. The antennas used with this transmitter must be installed to provide a minimum separation distance of 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device? except in accordance with accepted multi-transmitter operating procedure. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application +2WVcoVWnxZz9G8JUFVz5w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 11/28/2016

Application Dated: 11/28/2016
Hui Zhou Gaoshengda Technology Co.,LTD
NO.75 Zhongkai Development Area
Huizhou, Guangdong,
China
 
Attention: Hui Guan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AC23-WCT3EM2611
Name of Grantee:  Hui Zhou Gaoshengda Technology Co.,LTD
Equipment Class: Digital Transmission System
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CC MO 15C 2402.0  -  2480.0 0.0015  
20 CC MO 15C 2412.0  -  2462.0 0.1109  

Single Modular Approval. Output power listed is maximum combined conducted output power. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device? except in accordance with accepted multi-transmitter operating procedure. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. Device supports 20/40 MHz bandwidth modes.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application +2WVcoVWnxZz9G8JUFVz5w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Hui Zhou Gaoshengda Technology Co.,LTD
NO.75 Zhongkai Development Area
Huizhou, Guangdong,
China
  Date of Grant: 11/28/2016

Application Dated: 11/28/2016
 
Attention: Hui Guan

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AC23-WCT3EM2611
Name of Grantee:  Hui Zhou Gaoshengda Technology Co.,LTD
Equipment Class: Digital Transmission System
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CC MO 15C 2402.0  -  2480.0 0.0015  
20 CC MO 15C 2412.0  -  2462.0 0.1109  

Single Modular Approval. Output power listed is maximum combined conducted output power. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter within a device? except in accordance with accepted multi-transmitter operating procedure. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. Device supports 20/40 MHz bandwidth modes.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: